TRUE FINE TD20027W Rustic Farmhouse Bathroom Vanity Light Instruction Manual
- October 30, 2023
- TRUE FINE
Table of Contents
TRUE FINE TD20027W Rustic Farmhouse Bathroom Vanity Light
Product Information: Vanity Lighting
The Vanity Lighting is a lighting fixture that can be installed in your bathroom or dressing room to provide bright and clear illumination for grooming or makeup application. Thepackage includes all the necessary hardware and assembly instructions for easy installation. The product is manufactured in China.
Hardware Contents
- ABA Long mounting screw x 2
- BBB Wire nut x 3
- CBC Long mounting screw x 2
- DBD Mounting plate (Not actual size) x 1
Package Contents
- Long mounting screw x 2
- Wire nut x 3
- Mounting plate (Not actual size) x 1
Safety Information
Please read the entire instruction manual before attempting to assemble, operate, or install the product. To avoid electrical shock, turn off the circuit breaker before beginning the installation process.
Product Usage Instructions: Vanity Lighting
- Before beginning the assembly process, ensure that all parts are present and compare them with the package contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble the product.
- Estimated assembly time is 25 minutes. Tools required for assembly (not included) are flathead screwdriver, Phillips screwdriver, pliers, electrical tape, wire cutters, and safety glasses. Helpful tools (not included) are wire strippers and a step ladder.
- To attach the crossbar (DD) to the outlet box 1 (not included), use the long mounting screws (CC).
- Strip 3/4 in. of insulation from wire ends. Twist stripped ends together with pliers (not included), black to black (power) and white to white (neutral). Attach copper wire to ground wire. If necessary, attach copper ground wire to grounded outlet box.
- Attach the wire nuts (BB) and tape wire nuts (BB) 3 and wires together.
- Align the 2 screws (AA) through the holes of the back plate and fix them with screw nuts.
- Remove socket ring (C). Install shade (B) over socket of fixture (A), then secure with socket ring (C).
- Install light bulb (not included). Use three standard-base bulbs.
If you have any questions or concerns, please contact customer service at service@24h-reply.com.
PACKAGE CONTENTS
HARDWARE CONTENTS(shown actual size)
SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble, operate or install the product.
WARNING
- TURN OFF ELECTRICITY at main fuse box (or circuit breaker box) before beginning installation by removing fuse (or switching off circuit breaker).
- MINIMUM 90°C SUPPLY CONDUCTORS.
PREPARATION
Before beginning assembly of the product, make sure all parts are present.
Compare
parts with the package contents list and hardware contents list. If any part
is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Times: 25 minutes
Tools Required for Assembly (not included): Flathead screwdriver, Phillips
screwdriver, Pliers, Electrical tape, Wire cutters, Safety glasses.
Helpful Tools (not included): Wire strippers, Step ladder.
Customer Service: service@24h-reply.com
ASSEMBLY INSTRUCTIONS
- Attach the crossbar (DD) to the outlet box (not included) with the long mounting screws (CC).
Hardware Used
- Strip 3/4 in. of insulation from wire ends. Twist stripped ends together with pliers (not included), black to black (power) and white to white (neutral). Attach copper wire to ground wire. Helpful hint:
If necessary, attach copper ground wire to grounded outlet box.
- Attach wire nuts (BB).Tape wire nuts (BB)and wires together.
Hardware Used
- Align the 2 screws(AA) through the holes of the back plate, and fix them with screw nuts.
Hardware Used
- Remove socket ring (C). Install shade (B) over socket of fixture (A), then secure with socket ring (C).
- Install light bulb (not included). Use three standard-base bulbs.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>