TRUE FINE TD10049C Elis 3-Light Black Farmhouse Linear Island Chandelier Light Instruction Manual

: October 30, 2023
: TRUE FINE

Table of Contents

TRUE FINE TD10049C Elis 3-Light Black Farmhouse Linear Island Chandelier
Product Information
Product Usage Instructions
product Wiring Instructions
Product Safety Information
Overview
Assembly Instruction
Wiring Instruction
Product Specifications
Product Packaging
Cleaning
Safety Information
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

TRUE FINE TD10049C Elis 3-Light Black Farmhouse Linear Island Chandelier

Light

Product Information

The 3-Light Chandelier is a lighting fixture that comes with a fixture body, shade, socket ring, stem, loop, canopy, canopy lock ring, mounting strap, screw, wire connector, and wiring instructions. The fixture is designed to be connected to an outlet box and has two groups of wires – Group A (Green, Bare copper wire, White Ribbed) and Group B (Smooth, Black). The product is designed for indoor use only and must be cleaned with a soft cloth and mild soap. Abrasive materials such as scouring pads or powders, steel
wool or abrasive paper should not be used.

Product Usage Instructions

Unscrew the Socket ring (C), place Shade (B) to the socket, then screw the Socket ring (C) to fix the Shade (B).
Install Stem (D) and Loop (E) to Fixture body (A).
Link Loop (E) and Canopy (H) by Lock catch (F).
Fix Mounting strap (J) to outlet box with Screw (I).
Connect the wires according to the wiring instruction provided.
Fix Canopy (H) to Mounting strap (J) with Canopy lock ring (G).

product Wiring Instructions

Insert the green grounding screw into the hole with two raised dimples on the mounting bar. Wrap the ground wire from the fixture (if supplied) around the green grounding screw, then connect it to ground wire from the outlet box (if not fixed on the outlet box) using a wire connector(not supplied). If the ground wire from the fixture is not supplied, wrap the ground wire (if not fixed on the outlet box) from the outlet box around the green grounding screw and tighten it. NEVER CONNECT GROUND WIRE TO BLACK OR WHITE POWER SUPPLY WIRES.
Take note of the color of the wire(s) on your fixture. Identify which group your fixture wire(s) falls into and connect the wires according to the directions below: [GROUP A]: Connect to Black House Wire [GROUP B]: Connect to White House Wire
Take your fixture wire(s) from [Group A] and place it evenly against the black wire from the outlet box. Do NOT twist wires together before using wire connectors.
Fit a wire connector over the wires and screw the connector clockwise until you feel firmness.
Try gently to pull the connector off the wires. If you can pull the connector off, carefully re-do steps 3 and 4 as above, and check again for a firm connection.
Connect the fixture wire from [Group B] to the white wire from the outlet box in the same manner. Make sure no bare wires can be seen outside wire connectors.

Product Safety Information

Always switch off the electricity supply and allow to cool for 10 minutes before changing the light bulbs.

Contact Us
E-mail:service@24h-reply.com

Overview

Assembly Instruction

Unscrew Socket ring (C), place Shade (B) to the socket, then screw Socket ring (C) to fix the Shade (B).
Install Stem (D) and Loop (E) to Fixture body (A).
Link Loop (E) and Canopy (H) by Lock catch (F).
Fix Mounting strap (J) to outlet box with Screw (I).
Connect the wires according to the picture above. (Please refer to the wiring instruction for details )
Fix Canopy (H) to Mounting strap (J) with Canopy lock ring (G).

Wiring Instruction

Insert the green grounding screw into the hole with two raised dimples on the mounting bar. Wrap the ground wire from the fixture (if supplied) around the green grounding screw, then connect it to ground wire from the outlet box (if not fixed on the outlet box) using a wire connector(not supplied). If ground wire from the fixture is not supplied, wrap the ground wire (if not fixed on the outlet box) from the outlet box around the green grounding screw and tighten it.
NEVER CONNECT GROUND WIRE TO BLACK OR WHITE POWER SUPPLY WIRES.
Take note of the color of the wire(s) on your fixture. Identify which group your fixture wire(s) falls into and connect the wires according to the directions below:
[GROUP A]:

Connect to Black House Wire

| [GROUP B]:

Connect to White House Wire

---|---
BLACK| WHITE
PARALLEL WIRE (round & smooth)| PARALLEL WIRE (square & ridged)
WHITE OR GREY WITH TRACER| WHITE OR GREY WITHOUT TRACER
BROWN, GOLD OR BLACK WITHOUT TRACER| BROWN, GOLD OR BLACK WITH TRACER

Take your fixture wire(s) from [Group A] and place evenly against the black wire from the outlet box. Do NOT twist wires together before using wire connectors.
Fit a wire connector over the wires and screw the connector clockwise until you feel firmness.
Try gently to pull the connector off the wires. If you can pull the connector off, carefully re-do steps 3 and 4 as above, and check again for a firm connection.
Connect the fixture wire from [Group B] to the white wire from the outlet box in the same manner. Make sure no bare wires can be seen outside wire connectors.

Product Specifications

Input voltage 120V
Rated power 60W MAX × 3
Lamp socket E26
Cord Length 7ft.

Product Packaging

Fixture body × 1
Stem × 8
Loop × 2 & Lock catch × 2
Mounting strap × 1 & Canopy × 1
Screw × 2 & Wire nut × 3
Glass shade × 4 & Glass holder cup × 4
Lamp instruction × 1

Cleaning

To clean, wipe the fixture with a soft cloth. Clean glass with mild soap. Do not use abrasive materials such as scouring pads or powders, steel wool or abrasive paper.