Hukoro F42873-05a 3-Light with Chrome Vanity Light Instruction Manual

Hukoro F42873-05a 3-Light with Chrome Vanity Light Instruction Manual

CAUTION

• Inspect the wire insulation for any cuts, abrasions, or exposed copper that may have resulted during shipping. If there is a defect in the wire, do not attempt installation.
• Before starting installation of this fixture or removal of a previous fixture, disconnect the power by turning off the circuit breaker or by removing the fuse at the fuse box.

TOOLS REQUIRED

• **Ladder

**

• **Safety glasses

**

• **Electrical tape

**

• **Phillips screwdriver

**

• **Flat blade screwdriver

**

• **Pliers

**

• **Wire strippers

**

HARDWARE INCLUDED

• Fixture
  
  

• **Glass

**

• **Glass Shade

**

• **Decorative Screws

**

• **Screws

**

• **Screwdriver

**

• **Mounting Unit

**

• **Mounting Screws

**

• **Wire Nuts

**

*PARTS SHOWN MAY DIFFER SLIGHTLY PER LIGHT FIXTURE

EXPLODED PARTS

INSTALLATION

STEP 1
Use the mounting screws to attach the mounting unit to the junction box.

STEP 2
Make the electrical connection from the junction box to the fixture. Connect the ground wire to the mounting unit using the preinstalled green ground screw. Then, connect the positive, negative and ground wires with the supplied wire nuts. Secure with electrical tape.

STEP 3
Attach the fixture to the mounting unit through screw holes as shown, and secure it with screws. Tighten the screws with a screwdriver.

STEP 4
Attach the glass into fixture using screws as show. Tighten the screws with a screwdriver.

STEP 5
Attach the glass shade onto fixture using decorative screws as show.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>