TRUE FINE TD40017C 4 Light Chandelier Instruction Manual

: October 30, 2023
: TRUE FINE

Table of Contents

TRUE FINE TD40017C 4 Light Chandelier
Product Information
Product Specifications
Product Packaging
Safety Information
Product Usage Instructions
Overview
Assembly Instruction
Wiring Instruction
Product Specifications
Product Packaging
Cleaning
Safety Information
CONTACT US
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

TRUE FINE TD40017C 4 Light Chandelier

Product Information

The 4-Light Chandelier is a lighting fixture that comes with four light arms and a looped fixture chain. It also includes a mounting bar, metal box, cap, and canopy lock ring for installation. The chandelier is designed to be connected to an outlet box using wire connectors and the wiring instructions provided.

Product Specifications

Number of lights: 4
Material: Metal
Color: Black
Weight: 5 lbs

Product Packaging

The 4-Light Chandelier comes in standard product packaging that includes the chandelier itself, mounting bar, metal box, cap, canopy lock ring, and wiring instructions.

Cleaning:

To clean the chandelier, wipe it with a soft cloth. Clean the glass with mild soap. Do not use abrasive materials such as scouring pads or powders, steel wool or abrasive paper.

Safety Information

Always switch off the electricity supply and allow to cool for 10 minutes before changing the light bulbs.

Product Usage Instructions

Step 1: Insert the green grounding screw into the hole with two raised dimples on the mounting bar. Wrap the ground wire from the fixture (if supplied) around the green grounding screw, then connect it to ground wire from the outlet box (if not fixed on the outlet box) using a wire connector(not supplied). If the ground wire from the fixture is not supplied, wrap the ground wire (if not fixed on the outlet box) from the outlet box around the green grounding screw and tighten it. NEVER CONNECT GROUND WIRE TO BLACK OR WHITE POWER SUPPLY WIRES.
Step 2: Take note of the color of the wire(s) on your fixture. Identify which group your fixture wire(s) falls into and connect the wires according to the directions below:
- Group A: Green(Ground), Bare copper wire(Ground), White Ribbed. Connect to Black House Wire.
- Group B: K.Mounting strap, J.Screw I.Canopy
- H. Canopy lock ring, G.Fixture chain, F.Loop E.Metal box D.Cap
- C. Fixture body B.Metal box A.Cap. Connect to White House Wire.
Step 3: Take your fixture wire(s) from Group A and place it evenly against the black wire from the outlet box. Do NOT twist wires together before using wire connectors.
Step 4: Fit a wire connector over the wires and screw the connector clockwise until you feel firmness.
Step 5: Try gently to pull the connector off the wires. If you can pull the connector off, carefully re-do steps 3 and 4 as above, and check again for a firm connection.
Step 6: Connect the fixture wire from Group B to the white wire from the outlet box in the same manner. Make sure no bare wires can be seen outside wire connectors.

Note : Please refer to the wiring instruction for details.

Overview

Assembly Instruction

Turn the light arms of Fixture body (C) in place and make sure they’re evenly apart from each other.
Install Metal box(B) and (D) to fixture body (C) and fix with Cap (A) and (D).
Fix Mounting strap (K) to outlet box with Screw (J).
Thread the wire and Fixture chain (G) through Canopy (I), then link Loop (F) and Mounting strap (K) with Fixture chain (G).
Connect the wires according to the picture above. (Please refer to the wiring instruction for details )
Fix Canopy (I) to Mounting strap (K) with Canopy lock ring (H).

Wiring Instruction

Insert the green grounding screw into the hole with two raised dimples on the mounting bar. Wrap the ground wire from the fixture (if supplied) around the green grounding screw, then connect it to ground wire from the outlet box (if not fixed on the outlet box) using a wire connector(not supplied). If ground wire from the fixture is not supplied, wrap the ground wire (if not fixed on the outlet box) from the outlet box around the green grounding screw and tighten it. NEVER CONNECT GROUND WIRE TO BLACK OR WHITE POWER SUPPLY WIRES.
Take note of the color of the wire(s) on your fixture. Identify which group your fixture wire(s) falls into and connect the wires according to the directions below:

[GROUP A]:

Connect to Black House Wire

| [GROUP B]:

Connect to White House Wire

---|---
BLACK| WHITE
PARALLEL WIRE (round & smooth)| PARALLEL WIRE (square & ridged)
WHITE OR GREY WITH TRACER| WHITE OR GREY WITHOUT TRACER
BROWN, GOLD OR BLACK WITHOUT TRACER| BROWN, GOLD OR BLACK WITH TRACER

Take your fixture wire(s) from [Group A] and place evenly against the black wire from the outlet box. Do NOT twist wires together before using wire connectors.
Fit a wire connector over the wires and screw the connector clockwise until you feel firmness.
Try gently to pull the connector off the wires. If you can pull the connector off, carefully re-do steps 3 and 4 as above, and check again for a firm connection.
Connect the fixture wire from [Group B] to the white wire from the outlet box in the same manner. Make sure no bare wires can be seen outside wire connectors.

Product Specifications

Input voltage 120V
Rated power 60W MAX × 4
Lamp socket E12

Product Packaging

Fixture body × 1
Metal box × 2 & Cap × 2
Loop x 1 & Fixture chain × I
Mounting strap × 1 & Canopy × 1
Screw × 2 & Wire nut × 3
Lamp instruction × 1

Cleaning

To clean, wipe the fixture with a soft cloth. Clean glass with a mild soap.
Do not use abrasive materials such as scouring pads or powders, steel wool or abrasive paper.