Qlima FFB 106 Fireplace User Manual

: June 5, 2024
: Qlima

Table of Contents

Qlima FFB 106 Fireplace
SAFETY INSTRUCTION
USAGE METHODS
Parts List
CLEANING & MAINTENANCE
TROUBLESHOOTING
CONDITIONS OF WARRANTY
TECHNICAL SPECIFICATION
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Qlima FFB 106 Fireplace

Qlima-FFB-106-Fireplace-PRO

SAFETY INSTRUCTION

This document is part of the appliance. Read this user manual carefully before using the appliance and keep it for future reference This appliance is for decorative and domestic use only
This decorative appliance is designed for outdoor use and/or use indoors in amply ventilated areas only. An amply ventilated area must have a minimum of 25% of the surface area open. In this way the gases produced by combustion will be removed by fresh air. The use of this appliance in enclosed areas can be dangerous and is PROHIBITED.
The appliance must be installed in accordance with these instructions and with
local regulations.
This product is only intended to be used as a decorative fireplace in normal household conditions as described in this manual.
WARNING:

If the appliance is positioned too close to inflammable materials you may risk a fire. Always keep it 1 mtr away from inflammable materials
The appliance will become hot during operation. Do not cover the device (there is a risk of fire).
Keep away from children

CAUTION: Some parts of this product can become very hot and cause burns. Particular attention has to be given where children and vulnerable people are present, make sure that children are always aware of the presence of a burning fire.

Do not move the appliance when it is burning or still hot.
Do not insert hands, fingers or objects into any of the appliance openings.
Make sure that people and animals keep a 1 mtr safe distance from appliances in order to prevent them from any injury or risk of fire.
Extinguish the fire when going to sleep.
Have any repairs and/or maintenance carried out by a recognized service engineer only.
Read the Directions for Use before using the appliance.
Install the appliance only if it complies with local regulations, laws and standards.
Install the appliance according to the instructions as described in the installation section of the directions for use.
This appliance is tested according to European safety standards. Nevertheless, as with any other device, care must be taken.
Never use the appliance in places where harmful gases or fumes may be present (e.g. exhaust gases or paint fumes).
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
In order to avoid overheating, do not cover the device.
Be sure the table/floor you are placing this appliance can bear its weight
Installation only in a location which is protected against cross aeration/air draft
Convection air slots and rear ventilation of the appliance shall not be covered /obstructed
Do not put any flammable items on top of the appliance
This product can NOT be fixed to a wall of roof

USAGE METHODS

Assembly of the appliance

Parts List

Fireplace body 2x
Burner 1x
Extinguish cover 1x
Tempered glass 2x
Screw (M16 x 12mm) 4x
Screwcap 4x
Silicone pads 4x

Unpack the fireplace and accessories. Check the content for completeness and any damage incurred in transit. Keep children away from the packing.
Only install or place on a solid floor of non-flammable material
Remove all packaging and information material before assembly
Assemble the fireplace base together and secure the glass onto both sides of the fireplace body with 6 screws.
Read the warning sticker covering the burner, then remove the sticker
If something is broken or damaged: do not use the appliance. Return the appliance to your store immediately.
Place the burner into the burning chamber of the fireplace body.

Safe Way to (re-) fill the Appliance

Before refilling the appliance after extinguished fire: make sure to WAIT FOR AT LEAST 10 MINUTES.
NEVER refill with a burning fire! (Fig. 2)
Use a funnel for filling the appliance with bioethanol.
NEVER fill the appliance to a level above the max level indicator! (Fig 3: max level indicator)
Open the sliding cover of the fireplace, and fill the burner with the ethanol, watch carefully and do not overfill or spill. (Fig. 4)
Remove any spilled ethanol immediately – and before lighting! Use an appropriate absorbent tissue.
Use a long match or a long-end lighter to ignite. When igniting, keep a safe distance at arm’s length.(Fig. 5)

CAUTION:

Fuel will burn low at first. Please allow 10-15 minutes to reach teh optimum temperature and flame height.
Always maintain a safe distance of at least 1 meter from the fireplace when the flame is lit.

Safe Way to Shut down the Appliance (Fig. 6)

Step 1: hold the extinguish tool above the burner.
Step 2: carefully but firmly press the extinguish tool on the burner. Make sure to press firmly.
Hold for 15 seconds.
Remove the extinguisher tool and verify the fire is extinguished. If in doubt: repeat the extinguish step 1 and 2.

Possible suitable extinguishers are of class B and use:

AFFF: Aqua Fluid Film Foam extinguishers
AR-AFFF: (Alcohol-Resistant Aqueous Film Forming Foam) extinguisher
CO2: Carbon dioxide

NEVER extinguish with water!

Protect the appliance from wind and draught in a draughty environment.
Do not move.
Observe local legislation.
Only use outdoors. Should you coincidentally use it indoors then make sure to only use the appliance in a well-ventilated room (25% of the walls should be open and >60 m3).
Only install the appliance on a solid floor or table of noncombustible mate-rial!
Keep the appliance at least 1 meter away from inflammable materials.
Do not change the construction of the appliance!
Only use spare parts which are approved by the manufacturer.
When checking any malfunctioning or when in doubt: extinguish the fire using the extinguishing tool or using an extinguisher
This appliance is NOT suitable for continuous operation.
Never leave the appliance unattended during operation!
Never leave the appliance when the light is on!
Only use the type of fuel as specified by the manufacturer in this manual.

Igniting the fire
After filling: ignite the appliance with a suitable lighter make sure that:

Igniting can be done at 14 cm or more from the burner opening.
The fire can be witnessed during the igniting process.

Note:

Only use suitable bio-ethanol with over 95% alcohol, preferred fuel brand Domestic
Fuel will burn low at the start. Flame might hardly be visible. Allow 10-15 minutes for the flame to reach optimum temperature and visibility.
Avoid drafts
The glass of the appliance might become dark during use. This is normal and can be cleaned when the fire is extinguished and the appliance has cooled down.

CLEANING & MAINTENANCE

Clean regularly with a soft cloth, lukewarm water, and PH-neutral cleaning soap.
Do not use chemicals, steel wool or scrubbing sponges to clean.

STORAGE

To enhance the lifetime of the appliance: make sure to store the appliance in a dry and well-ventilated place after every usage. Always take the following steps:

Make sure it is cooled down
Clean it
Make sure it is completely dry

TROUBLESHOOTING

Problem	Cause / Solution

Fire does not ignite

| Check if proper ethanol is used
Check if there is enough ethanol in the burner

Fire outside the appliance

| Extinguish with a suitable extinguisher class B use:

• AFFF: Aqua Fluid Film Foam extinguishers

• AR-AFFF: (Alcohol-Resistant Aqueous Film Forming Foam) extinguisher

• CO2: Carbon dioxide

NEVER extinguish with water!

CONDITIONS OF WARRANTY

There is a two-year warranty on your appliance from the date of purchase. All material or manufacturing defects will be repaired free of charge.
The following applies:

All claims for compensation, including consequential damage, will not be entertained.
Any repairs or replacement of components during the warranty period will not result in an extension of the warranty period.
The warranty will expire if any alterations have been made, no genuine components have been fitted or if the appliance has been repaired by a third party.
Components subject to normal wear and tear are not covered by the warranty.
The warranty is only valid on the presentation of the original, unaltered, and date-stamped purchase receipt.
The warranty does not cover damage caused by actions that deviate from those as described in the user’s manual or by neglect.
Transportation costs and the risks involved during the transportation of the appliance or components shall always be for the account of the purchaser.

To prevent unnecessary expenses, we recommend that you always carefully read the user’s manual first. If this does not provide a solution, take the appliance to your distributor for repair.
The use of this product and the elements required for that purpose is entirely at the end user’s own risk.
End of lifetime
Never dispose of non-biodegradable products in the environment. When the appliance is no longer functional, it should be disposed of in such a way as to cause minimum environmental impact, in accordance with the regulations of your local authority.