Hukoro F42823-05 3-Light Clear Glass Vanity Light Instruction Manual
- October 30, 2023
- Hukoro
Table of Contents
Hukoro F42823-05 3-Light Clear Glass Vanity Light Instruction Manual
ASSEMBLY INSTRUCTIONS
- Inspect the wire insulation for any cuts, abrasions, or exposed copper that may have resulted during shipping. If there is a defect in the wire, do not attempt installation.
- Before starting installation of this fixture or removal of a previous fixture, disconnect the power by turning off the circuit breaker or by removing the fuse at the fuse box.
Tools Required:
-
Ladder
-
Safety glasses
-
Electrical tape
-
Phillips screwdriver
-
Flat blade screwdriver
-
Pliers
-
Wire strippers
HARDWARE INCLUDED
-
Fixture
-
Glass shade
-
Mounting Unit
-
Ball Nuts
-
Mounting Screws
-
Wire Nuts
EXPLODED PARTS
INSTALLATION
STEP 1
Unscrew the ball nuts from the mounting unit. Use the mounting screws to
attach the mounting unit to the junction box.
STEP 2
Make the electrical connection from the junction box to the fixture. Connect
the ground wire to the mounting unit using the preinstalled green ground
screw. Then, connect the positive, negative and ground wires with the supplied
wire nuts. Secure with electrical tape.
STEP 3
Attach the fixture to the mounting unit through screw holes as shown, and
secure it with ball nuts.
STEP 4
Remove the socket rings from the socket. Attach the glass shade onto fixture
using socket rings.
STEP 5
Install bulbs (not included).
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>