TRUE FINE TD10027W Adella 1-Light Black Rustic Natural Rattan Plug-In Swing Arm Wall Lamp with Dimmer Switch Instruction Manual
- October 30, 2023
- TRUE FINE
Table of Contents
Instruction Manual
Wall Sconce
PACKAGE CONTENTS
| PART | DESCRIPTION | QUANTITY |
|---|---|---|
| A | Fixture | 1 |
| B | Shade | 1 |
| C | Socket ring | 1 |
HARDWARE CONTENTS(shown actual size)
**** SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble,
operate or install the product.
WARNING
- TURN OFF ELECTRICITY at main fuse box (or circuit breaker box) before beginning installation by removing fuse (or switching off circuit breaker).
- MINIMUM 90°C SUPPLY CONDUCTORS.
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare
parts with package contents list and hardware contents list. If any part is
missing or damaged, do not attempt to assemble the product.
Estimated Assembly Times: 25 minnutes
Tools Required for Assembly (not included): Flathead screwdriver , Phillips
screwdriver, Pliers, Electrical tape, Wire cutters, Safety glasses.
Helpful Tools (not included): Wire strippers, Step ladder.
Customer Service: service@24h-reply.com
ASSEMBLY INSTRUCTIONS
-
According to the right figure, unfold the lamp.
-
Attach the mounting plate (DD) to the outlet box (not included) with the long mounting screws (CC).
Hardware Used -
Strip 3/4 in. of insulation from wire ends.
Twist stripped ends together with pliers (not included), black to black (power) and white to white (neutral). Attach copper wire to ground wire. Helpful hint: If necessary, attach copper ground wire to grounded outlet box.
-
Attach wire nuts (BB).Tape wire nuts (BB)and wires together.
Hardware Used -
Align the 2 screws(AA) through the holes of the back plate, and fix them with screw nuts.
Hardware Used -
Remove socket ring (C) from the socket, put on the shade (B), and fix it with socket ring(C).
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>