TRUE FINE TD130004OT Outdoor Wall Sconce Instruction Manual
- October 30, 2023
- TRUE FINE
Table of Contents
TRUE FINE TD130004OT Outdoor Wall Sconce
Product Information
The Outdoor Wall Sconce is a lighting fixture designed for outdoor use. The package includes a fixture body, a decorative part, a mounting plate, long mounting screws, wire nuts, and a hardware contents list. The assembly requires tools such as a flathead screwdriver, Phillips screwdriver, pliers, wire cutters, safety glasses, and electrical tape. The product is made in China.
PACKAGE CONTENTS
| PART | DESCRIPTION | QUANTITY |
|---|---|---|
| A | Fixture | 1 |
| B | Decorative part | 1 |
HARDWARE CONTENTS (shown actual size)
SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble, operate or install the product.
WARNING
- TURN OFF ELECTRICITY at main fuse box (or circuit breaker box) before beginning installation by removing fuse (or switching off circuit breaker).
- MINIMUM 90°C SUPPLY CONDUCTORS.
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Times: 25 minnutes
Tools Required for Assembly (not included): Flathead screwdriver , Phillips screwdriver, Pliers, Electrical tape, Wire cutters, Safety glasses. Helpful Tools (not included): Wire strippers, Step ladder.
ASSEMBLY INSTRUCTIONS
- As shown in the figure on the right, attach decorative part to the fixture body.
- Attach the mounting plate (DD) to the outlet box (not included) with the long mounting screws (CC).
- Strip 3/4 in. of insulation from wire ends. Twist stripped ends together with pliers (not included), black to black (power) and white to white (neutral). Attach copper wire to ground wire. Helpful hint: If necessary, attach copper ground wire to grounded outlet box.
- Attach wire nuts (BB).Tape wire nuts (BB) and wires together.
- Align the 2 screws(AA) through the holes of the back plate, and fix them with screw nuts.
Install light bulb (not included). Use one standard-base bulb.
Customer Service: service@24h-reply.com