TRUE FINE TD40020OT 2 Light 20.5 Inch Modern Black Outdoor Wall Sconce Lantern Instruction Manual
- October 30, 2023
- TRUE FINE
Table of Contents
Instruction Manual
Outdoor Wall Sconce
PACKAGE CONTENTS
| PART | DESCRIPTION | QUANTITY |
|---|---|---|
| A | Fixture | 1 |
| B | Glass | 4 |
HARDWARE CONTENTS(shown actual size)
SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble,
operate or install the product.
WARNING
- TURN OFF ELECTRICITY at main fuse box (or circuit breaker box) before beginning installation by removing fuse (or switching off circuit breaker).
- MINIMUM 90°C SUPPLY CONDUCTORS.
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare
parts with package contents list and hardware contents list. If any part is
missing or damaged, do not attempt to assemble the product.
Estimated Assembly Times: 25 minnutes
Tools Required for Assembly (not included): Flathead screwdriver , Phillips
screwdriver, Pliers, Electrical tape, Wire cutters, Safety glasses.
Helpful Tools (not included): Wire strippers, Step ladder.
Customer Service: service@24h-reply.com
ASSEMBLY INSTRUCTIONS
-
As shown in the figure on the right, attach bulbs, glass and decorative part into the fixture body.
Hardware Used
A Fixture
B Glass
-
Attach the mounting plate (DD) to the outlet box (not included) with the long mounting screws (CC).
Hardware Used
Long mounting screw
x2
Mounting plate x1
-
Strip 3/4 in. of insulation from wire ends.
Twist stripped ends together with pliers (not included), black to black (power) and white to white (neutral). Attach copper wire to ground wire. Helpful hint:
If necessary, attach copper ground wire to grounded outlet box.
-
Attach wire nuts (BB).Tape wire nuts (BB) and wires together.
Hardware Used
Wire nut x3 -
Place fixeture (A) onto the mounting plate (DD). Secure with short mounting screws (AA).
CAUTION: To avoid any waterproofing problems, please make sure the light fixture fits the mounting surface perfectly installation and use waterproof glue around the canopy for better sealing after installation.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>