Hukoro F72591-11i 1-Light Flush Mount Matte Instruction Manual
- October 30, 2023
- Hukoro
Table of Contents
ASSEMBLY INSTRUCTIONS
F72591-11i 1-Light Flush Mount Matte
CAUTION
- Inspect the wire insulation for any cuts, abrasions, or exposed copper that may have resulted during shipping. If there is a defect in the wire, do not attempt installation.
- Before starting installation of this fixture or removal of a previous fixture, disconnect the power by turning off the circuit breaker or by removing the fuse at the fuse box.
TOOLS REQUIRED
HARDWARE INCLUDED
*PARTS SHOWN MAY DIFFER SLIGHTLY PER LIGHT FIXTURE
EXPLODED PARTS
INSTALLATION
STEP 1
Unscrew the ball nuts from the mounting unit.
Use the mounting screws to attach the mounting unit to the junction box.
ASSEMBLY INSTRUCTIONS (INSTALLATION)
STEP 2
Make the electrical connection from the junction box to the fixture.
Connect the ground wire to the mounting unit using the preinstalled green
ground screw. Then, connect the positive, negative and ground wires with the
supplied wire nuts. Secure with electrical tape.
STEP 3
Secure the fixture to the mounting unit with the ball nuts.
STEP 4
Install bulb (not included)
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>