Hukoro F14181-QC 1-Light Matte Black Outdoor Pendant Light Instruction Manual

Hukoro F14181-QC 1-Light Matte Black Outdoor Pendant Light

Product Information

The product is a light fixture that requires assembly and installation. It comes with a mounting unit, a fixture, a cover, threaded pipe and hex nut, rubber rings, nuts, iron, decorative nut, screws, wire nuts, and mounting screws. The product also requires tools such as a ladder, safety glasses, an electrical Phillips screwdriver, flat blade screwdriver, pliers, wire strippers, and tape for assembly and installation.

Product Usage Instructions

1. Before assembly and installation, ensure to turn off the power supply to the junction box by removing the fuse at the fuse box.
2. Use the provided mounting screws to attach the mounting unit to the junction box. Unscrew the rubber rings and screws from the mounting unit before attaching it.
3. Screw the threaded pipe and hex nut into the fixture and secure it with a hex nut.
4. Place the top cover onto the threaded pipe and secure it with rubber ring A and nut.
5. Attach the iron to the fixture through screw holes as shown in the manual and secure it with rubber ring B and decorative nut.
6. Make the electrical connection from the junction box to the fixture. Connect the ground wire to the mounting unit using the preinstalled green ground screw. Then connect the positive, negative, and ground wires with the supplied wire nuts and secure them with electrical tape. Connect black or red wire (hot) from the junction box, white wire (neutral) from the junction box, black wire from the fixture, white wire from the fixture, and bare or green ground wire from the junction box.
7. Attach the fixture to the mounting unit through screw holes and secure it with screws.
8. Install bulbs (not included).
9. After installation, use caulk in the back plate and wall mounting surface to prevent water from entering.

CAUTION

• Inspect the wire insulation for any cuts, abrasions, or exposed copper that may have resulted during shipping. If there is a defect in the wire, do not attempt installation.
• Before starting the installation of this fixture or removal of a previous fixture, disconnect the power by turning off the circuit breaker or by removing the fuse at the fuse box.

TOOLS REQUIRED

HARDWARE INCLUDED

• PARTS SHOWN MAY DIFFER SLIGHTLY PER LIGHT FIXTURE

EXPLODED PARTS

INSTALLATION

STEP 1

• Unscrew the rubber rings and screws from the mounting unit.
• Use the mounting screws to attach the mounting unit to the junction box.

STEP 2

• Screw the threaded pipe and hex nut into the fixture, then secure it with hex nut.

STEP 3

• Place the top cover onto the threaded pipe, then secure with rubber ring A and nut.

STEP 4

• Attach the iron to the fixture through screw holes as shown, and secure it rubber ring B and decorative nut.

STEP 5

• Make the electrical connection from the junction box to the fixture.
• Connect the ground wire to the mounting unit using the preinstalled green ground screw.
• Then, connect the positive, negative and ground wires with the supplied wire nuts. Secure with electrical tape.

_ NOTICE: _Please use caulk in the back plate and wall mounting surface to prevent water from entering.

STEP 6

• Attach the fixture to mounting unit through screw holes as shown, and secure it with screws.

STEP 7

• Install bulbs (not included).

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>