Hukoro F50343-QC 3-Light Indoor Glass Retro Pendant Statement Tiered Hanging Chandelier Instruction Manual

Hukoro F50343-QC 3-Light Indoor Glass Retro Pendant Statement Tiered

Hanging Chandelier

Product Information

The product is a light fixture that includes a canopy, chain, mounting unit, ball nuts, mounting screws, wire nuts, and bulbs (not included). The product requires assembly and installation. Tools required for installation include a ladder, safety glasses, an electrical Phillips screwdriver, flat blade screwdriver, pliers, and wire strippers. The product is designed to be connected to a junction box and requires an electrical connection. The product comes with an exploded parts diagram to aid in installation.

Product Usage Instructions

Assembly Instructions

1. Before assembly, remove the fuse at the fuse box.
2. Unscrew the ball nuts from the mounting unit and use the mounting screws to attach the mounting unit to the junction box.
3. Choose the desired length of chain and open it using a Phillips screwdriver and pliers. Attach one end of the chain to the fixture using a quick link, then thread the fixture wire and ground wire through the chain and canopy. Attach the other end of the chain to the canopy using another quick link.
4. Make the electrical connection from the junction box to the fixture. Connect the ground wire to the mounting unit using the preinstalled green ground screw. Connect the positive, negative, and ground wires with the supplied wire nuts and secure them with electrical tape.
5. Attach the canopy to the mounting screws using ball nuts.
6. Install bulbs (not included).

Note: The parts shown in the manual may differ slightly from those included with your specific light fixture.

Always follow safety guidelines when assembling and installing the product. Use appropriate tools and wear safety glasses when necessary. If you are unsure about any aspect of the assembly or installation process, consult a qualified electrician.

CAUTION

• Inspect the wire insulation for any cuts, abrasions, or exposed copper that may have resulted during shipping. If there is a defect in the wire, do not attempt installation.
• Before starting the installation of this fixture or removal of a previous fixture, disconnect the power by turning off the circuit breaker or by removing the fuse at the fuse box.

TOOLS REQUIRED

HARDWARE INCLUDED

• PARTS SHOWN MAY DIFFER SLIGHTLY PER LIGHT FIXTURE

EXPLODED PARTS

INSTALLATION

STEP 1

• Unscrew the ball nuts from the mounting unit.
• Use the mounting screws to attach the mounting unit to the junction box.

STEP 2

1. Choose the length of the chain you need (Open the chain using a phillips screwdriver (not included) and pliers (not included). )
2. Open the quick link. Then attach it to the fixture. Close the quick link.

STEP 3

1. Weave the fixture wire and the fixture ground wire through the chain and canopy.
2. Open the quick link. Then attach it to the canopy. Close the quick link.

STEP 4

• Make the electrical connection from the junction box to the fixture.
• Connect the ground wire to the mounting unit using the preinstalled green ground screw.
• Then, connect the positive, negative and ground wires with the supplied wire nuts. Secure with electrical tape.

STEP 5

• Attach the canopy to the mounting screws through screw holes as shown, and secure it with ball nuts.

STEP 6

• Install bulbs (not included)

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>