kogan Matt Blatt Mendoza Curved Bed Frame User Guide
- June 4, 2024
- Kogan
Table of Contents
kogan Matt Blatt Mendoza Curved Bed Frame
COMPONENTS
Hardware
ASSEMBLY
Step 1: Align the holes of one sideboard (C) with one side of the
headboard (A). Place a bracket (J) on top and using the Allen key (6), secure
the components (A, C) with four 30mm M8 screws (1). Repeat this process with
the other sideboard on the other side of the headboard. Align the holes on the
footboard (B) with the unsecured ends of the sideboards. Secure the two ends
of the footboard (B) to the sideboards in the same manner.
Step 2: Align one leg (F) onto one of the corners of the assembly. Using
the Allen key (6), secure the leg with two 20mm MB screws (2). Repeat this
process with the remaining legs on the three other corners.
Step 3: Using the Allen key (6), secure the vertical frame slat (D) with
two 25mm MB screws (3). Secure the other end of the vertical frame slat with
the footboard (B) the same way.
Repeat this whole process with the other vertical frame slat.
Step 4: Align one leg support (E) under a vertical frame slat (D). Using
the Allen key (6), attach the leg support with two 35mm M6 screws (4). Using
the wrench (7), secure the underside of the leg support with two M6 nuts (5).
Repeat this process with the three remaining leg supports.
Step 5 : Connect three slats (G) with two end caps (I) and two inner caps
(H) as shown below. This creates a slat assembly. Repeat this process until
you have fourteen slat assemblies.
Click the caps (H, I) onto the rails on the sideboard (C) and the vertical
frame slats (D) to attach each slat assembly onto the bed.
Complete!
NEED MORE INFORMATION?
We hope that this user guide has given you the assistance needed for a simple
set-up. For the most up-to-date guide for your product, as well as any
additional assistance you may require, head online to
help.mattblatt.com.au
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>