MONI HB-56 Car Seat Fantom Instruction Manual

MONI HB-56 Car Seat Fantom

Product Information

The product is a child safety car seat called Fantom HB-56, suitable for children weighing between 22 and 36 kg. The car seat is compliant with the European Standard for Child Safety Equipment (ECE R 129/03) and is approved for use in i-Size compatible seats in vehicles. The approval label with the E approval mark (in a circle) and the approval number is affixed to the child seat.

Product Usage Instructions

1. Read the instruction manual carefully and keep it for future reference.
2. Ensure that the car seat is compatible with your vehicle and follow the instructions provided in the vehicle’s user manual.
3. Make sure that the child is within the recommended weight range for the car seat.
4. Install the car seat according to the instructions provided in the user manual and ensure that it is securely fastened.
5. Adjust the car seat’s harness so that it fits snugly around the child.
6. Regularly check the car seat for any signs of wear and tear, and clean it according to the maintenance and cleaning instructions provided in the user manual.
7. For any further assistance or queries, contact the manufacturer Moni Trade Ltd. at their address in Bulgaria or visit their website.

Note: The car seat can be used in the direction of travel with a 3-point belt on seats 2, 4, and 6 in the vehicle, but not on seats 1, 3, and 5. Diagonal belts and lap belts are approved for use as car safety belts.

IMPORTANT! READ CAREFULLY AND KEEP FOR FUTURE REFERENCE

Group 3: Suitable for children weighing from 22 to 36 kg.

INSTRUCTION MANUAL FOR CAR SEAT FANTOM

NOTICE

1. This is a “universal” child restraint system. It is approved in accordance with Regulation No. 129 for use in “i-Size compliant” seating positions in vehicles as indicated by vehicle manufacturer in the vehicle user’s manual.
2. It can be expected that, in terms of installation, the system will comply if the manufacturer has stated in the vehicle user manual that this type of I-size “universal” product (from the relevant group) can be used in it.
3. This child restraint has been classified as “i-Size universal system” under more stringent conditions than those which applied to earlier designs which do not carry this notice.
4. If in doubt, consult either the child restraint manufacturer or the retailer.

INTENDED USE

This product is a universal restraint system for children approved under Regulation No. 129 for use in “i-Size compliant” seating positions for weight group 3 for children weighting from 22 to 36 kg, size range: 125-150 cm. THIS RESTRAINT SYSTEM IS SUITABLE ONLY IF THE APPROVED VEHICLES ARE EQUIPPED WITH LAP/3-POINT/ STATIC WITH RETRACTING SAFETY BELTS, APPROVED TO UN/ECE REGULATION NO. 16 OR OTHER EQUIVALENT STANDARDS. Check in the instructions of your car if this universal restraint system for children from the mentioned weight groups can be placed.

WARNING! EXTREME HAZARD! DO NOT PLACE THE CAR SEAT IN A VEHICLE ON CAR SEATS WITH AIR BAGS (SRS).

WARNING! Your child will be maximally protected if you follow the warnings and recommendations from the instructions! Pay attention to the warnings provide all necessary in order to avoid the risk of injury or impairment of the child if you do not provide its safety! You are responsible for the safety of the child if you do not follow and do not comply with these warnings and recommendations! Make sure that anyone who uses the car seat is familiar with the instruction and follows it. Do not use parts or accessories for the car seat, which are not approved by the manufacturer or the distributer, because this may put your child at risk and to lead to voiding of the warranty of the product. PLEASE, READ THE INSTRUCTIONS CAREFULLY BEFORE YOU INSTALL THE CAR SEAT IN THE VEHICLE, BECAUSE ITS INCORRECT USE CAN BE DANGEROUS.

LEGAL REQUIREMENTS

The child safety car seat has been manufactured, tested and certified in accordance with the requirements of the European Standard for Child Safety Equipment (ECE R 129/03). The seal with the E approval mark (in a circle) and the approval number are on the approval label (sticker affixed to the child seat). This approval will be invalid if you make any changes to the child safety seat. Only the manufacturer is allowed to make changes to the child restraint system.

TYPES OF APPROVAL BELTS TO HAVE IN THE VEHICLE

Car safety belts: diagonal belt; lap belt. You can use your car seat as follows (figure 7):

IMPORTANT! READ CAREFULLY AND KEEP FOR FUTURE REFERENCE

WARNING!

• The car seat cannot be used by children under 125 cm tall.
• Never leave the child unattended while is in the car seat.
• Use the car seat for its intended purpose only! It is not designed to be used in domestic conditions.
• Do not use the child seat in the direction opposite to the direction of movement of the front seat with an air cushion. This can result in death or serious injury.
• Always protect your child when it is in the car seat using the safety belt.
• Do not leave the buckle partially closed, it should be locked when all parts are engaged.
• Make sure that all belts attaching the restraint system to the vehicle are as tight as possible. Make sure that the belts that secure the child are adjusted to fit the child’s body, tightened as much as possible without causing discomfort to your child and are not twisted.
• Make sure that all rigid elements and plastic parts are safe. System is properly locked and there is no danger in daily use of the stool in the adjustable seats and the doors of the vehicle are trapped.
• It is very important to use the waist belt down low, so that the pelvis is firmly engaged.
• Do not use the restraint system in a car with waist belt only.
• Always check for unsecured objects behind the car seat or on the vehicle seat next to it, objects and luggage, which can lead to injuries of the child in case of a sudden stop, collision or an accident. They must be removed or securely fixed, at a safe distance from the car seat and the child.
• The product must be fixed safely to the vehicle seat with the belts, even if it is not used, because otherwise in case of an accident or a sudden stop of the vehicle, the car seat can injure the passengers in it.
• Do not use other load bearing points, except for those described in the instructions and indicated on the car seat.
• Make sure that all parts of the restraint system are fastened correctly in place and there is no danger during daily use of the car, for them to get pinched in the adjustable seats and doors.
• After a strong collision the car seat and belts can be damaged, that is why it is recommended for you to replace them.
• Do not make any changes, improvements and do not add new accessories or pads on the construction of the car seat except for those approved by the manufacturer and without prior proof of an authorized organization. Please, make sure that you follow carefully the instructions of the manufacturer, when you place and adjust this restraint system.
• After serious accidents, child safety seat should be replaced.
• Do not place additional cords or ties on the product to avoid the risk of suffocation.
• If a damage of the car seat occurs do not try to remove it by yourselves, contact an authorized repair shop or the importer.
• The child restraint system must not be used without a cover (upholstery).
• The cover (upholstery) of the child’s car seat must not be replaced with a cover that has not been approved by the manufacturer. The cover is integral part of the restraint system’s safety.
• If you leave your car exposed to direct sunlight, we recommend you to cover the car seat, because it and its plastic parts can get overheated and deformed. Also, before you place the child in the car seat, check whether the car seat is heated, in order to prevent it from burning itself.
• Keep out of fire !
• Dо not store the product in humid places and in direct sunlight.
• Do not try to repair the car seat by yourselves. this may lead to resulting damage, if it is not done by a professional.
• Always put the seat as close as possible to the backrest of the seat, as shown in schemes A.

MAIN PARTS OF THE CAR SEAT – FIGURE 1:

1. Seat;
2. Red crescent hook;
3. Belt guidance.

IMPORTANT! The diagrams and figures in this instruction are illustrative and indicative only.

CHILD SEAT INSTALLATION: GROUP III/22-36 kg – A

Child seat installation in the forward-facing position with vehicle seat belt – figures 3 and 4.

1. Put the seat as close as possible to the backrest of the seat, as shown in figure 3.
2. Put the child on the seat.
3. Pull out the car seat belt and insert it as shown in figure 3. Place the diagonal belt above the armrest and the hip belt under the armrest.
4. Make sure that the diagonal seatbelt section runs over your child`s shoulder bone and not in front of his or her neck. Lock the tip of the buckle into the vehicle seat buckle with a CLICK noise.
5. To release the child from the seat, you must unbuckle the car seat belt.

Child seat installation in the forward-facing position with vehicle seat belt – figures 5 and 6.

1. Put the seat as close as possible to the backrest of the seat, as shown in figure 3.
2. Put the child on the seat.
3. Pull out the car seat belt and insert it.
4. The shoulder belt of the car seat belt passes through the chest of the child and above the armrest. The lap belt passes through the upper thigh and under the armrest.
5. Close the top of the lock in the car seat lock with CLICK noise.
6. To release the child from the seat, you must unbuckle the car seat belt.

INSTRUCTIONS FOR MAINTENANCE AND CLEANING

MAINTENANCE

1. Regularly check the locking, fixing and adjusting mechanisms, the belts and cover, in order to make sure that they are in good working order, not worn or damaged and their use is safe.
2. If you find any fault or that any of the functions does not work, stop using he car seat.
3. The car seat must not be used without cover! It is integral part of the car seat and can be replaced only with an identical one to the one provided by the manufacturer.
4. Do not use the car seat after an accident because it can have undergone structural changes which can make it very dangerous. It is possible to have damage which are not visible. The inspection of a repair shop specialist is obligatory.
5. Do not expose the car seat to the harmful effect of direct sunlight, because this will lead to faster and untimely aging of the plastic parts and fading of the cover.
6. Store the car seat at a place to which small children do not have access. Do not store it at a wet and dusty room with very low or very high room temperature. Do not place other objects on the car seat while you store it, because this may lead to damage of the product.
7. Check regularly the main parts before each use of the car seat.
8. If any technical problem occurs related with the normal use of the car seat, do not try to repair the product by yourselves. Contact the shop, from which you bought It or authorized service center.

CLEANING

1. The cover can be removed and cleaned with soft cleaning agent in a washing machine at a delicate fabrics cycle (30°C). Please, see the instructions of the washing label, sewn to the cover. The colours of the cover can fade if it is cleaned at more than 30°C. Do not use spin dryer and tumble dryer (the fabric can get separated from the wadding).
2. Part of the chair is plastic and can be cleaned using warm water and soap. Do not use strong detergents (for example solvents).
3. The safety belt can be removed and be cleaned with lukewarm soapy water. Warning!Never remove the locking tongues of the harnesses.
4. Make sure that during cleaning no soap enters the buckle or any adjusting or guiding part.
5. Do not use chemical cleaning agents, bleach or abrasive agents, in order to clean any part of the car seat.
6. Always after cleaning let the car seat dry completely and afterwards use it or store it.
7. Avoid wetting the labels. Do not remove them, because they contain important information.

Warning! The child’s car seat must not be used without the cover. If you have to replace the cover of the car seat, please, make sue that you use the original cover, because this is important for the correct operation of the restraint system. In order to replace it with an original cover, contact the commercial agent you bought this product from the importer or manufacturer.

Manufactured for MONI in PRC Manufacturer and Importer: Moni Trade Ltd. Address: Bulgaria, Sofia, Trebich, 1 Dolo Str., Phone number: 003592/936 07 90, Website: www.moni.bg

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>