FLINQ FQC8270 Lamp Dusk Instruction Manual

June 10, 2024
FlinQ

FLINQ FQC8270 Lamp Dusk Instruction Manual
FLINQ FQC8270 Lamp Dusk

Welcome to the FlinQ family

Thanks for purchasing one of our items! To ensure continuous operation and accuracy, please read these operating instructions carefully before use and save this manual for future use. Passing certain procedures may result in incorrect reading and incorrect use of this product. We hope that you will enjoy using your new FlinQ-product! If by any chance the item is damaged, defective or broken, you are covered with warranty! Please do not hesitate to contact us for any questions, concerns or suggestions at the email address as mentioned in this manual.

Register your FlinQ product
We can imagine you want to treat your FlinQ item carefully.
Register your product and you will be entitled to the following:

  1. year extra warranty (2+1)
  2. Personal support
  3. Digital warranty certifi cate
  4. Digital manual

Scan the QR code or go to fl inqproducts.nl/registration

FlinQ Solar Lamp Dusk

Please read this manual carefully before using the product! Keep it in hand for future reference. Warnings alert the user to potential serious outcomes, such as injuries or adverse events to the user. Cautions alert the user to exercise care necessary for the safe and effective use of the product. Notes contain important information that may be overlooked or missed. This light is suitable for OUTDOOR use only! This appliance may be used by children aged 12 and over, and by persons with reduced physical, sensory or mental capacities or a lack of sufficient experience and/or knowledge, provided they are supervised or have been trained in the safe use of the appliance and understand the potential dangers. Cleaning and maintenance must not be carried out by children without supervision. Children must not be allowed to play with the appliance. Keep the packaging material away from children. There is a risk of suffocation! Do not allow unsupervised children to clean or maintain this device.

Warning: Do not leave packaging material lying around carelessly. This may become dangerous playing material for children. Risk of suffocation!

Danger: due to swallowing small parts. Keep these away from children. Risk of suffocation!

Specifications

Automatic day/night light sensor Low Lux ON and OFF
Automatic light ON/OFF Yes, by light intelligent sensor
Work time 8-16 Hours max (depends on seasons)
Durable housing Completely corrosion free
Installation Easy to install on wall, sheds etc (all parts included)
Waterproof IP44 waterproof
Solar panel High effi ciency advanced black mono-crystalline solar panel

0.44Wp 18-20% conversion
Solar charging| Max 6 ~ 8hrs in direct sun
Protect function| yes, hardware & software (over charging, over discharging, over current and short circuit)
Kelvin| 3000K Warm White color
HP LED

| SMD high power 2835 LED 4pcs
Lumen| +/- 40Lm max
Angle from light| 360 degrees round
Color| Dark Grey UV Protected
Lifespan| 35.000 hours
Battery| HPC Li-Ion rechargeable battery 3.7V 1200mAh 4.44Wh (18650 non- replaceable type)
Dimensions| 12 x 8.9 x 14 cm
Materials| ABS + Iron
Theft protection| Yes, by locking frame and screws

Read and follow the instructions contained in this manual carefully. Keep
these instructions at a safe place for future reference.

IP 44: Only for outdoor use. Never immerse this light under water.

The operating life of the product will be less if the ambient temperature is
higher than 45°C or lower than -10°C.

Main installation and best location position

Note: During the first use of the product, place the product in a place with sufficient direct sunlight for first charging at a minimum time for 2~3 days in the OFF switch position!

When the lamp is in a location that receives less sunlight, it will operate for fewer hours per night. Night lighting time can also vary depending on how bright the sky is on any given day. Insufficient charging of the battery will affect performance and may result in the fact that the lamp goes off before dawn because the battery was not fully charged.

The solar panel is best directed as much as possible towards the south in order to maximize exposure to direct sunlight. Please note that the four different seasons (and the light angle in these four different seasons) can affect the lighting time of the lamp. The solar light will work longer in summer then during winter time and will make the solar panel charge the internal battery less, or even not at all, than during summer time. Select a location that is not located close to other light sources, such as for example street lighting, because this enables the lamp to be switched off automatically.

Maximum lighting time depends on sunlight and daytime charging.
Minimum charging time is 6~8 hours in direct sunlight.

If snow or ice is on top of the solar panel please remove it at all times so the battery can be charged correctly by the panel.

Note: During winter time or when the daily sunshine duration is less short, it is suggested to switch to power OFF and charge when there is sunlight available, before power ON again (number 4).

  • Choose a stable, solid and supportive surface and make sure the lamp is used and faced towards the direction of the sun (most south location).
  • This lamp is intended only for outside use

Ps. you can try other ways to install it depending on the actual condition. But do not keep the solar panel upside down in anyway, otherwise it will affect the effect of solar charging at daylight.

Contents

  1. Solar panel
  2. LED
  3. Body
  4. LED and ON/OFF switch
  5. Lampshade
  6. Installation back plate
  7. Expansion plug
  8. Screw (M3.5 * 30mm)
  9. Screw (M4 * 12mm)

Note: If there is sunlight or other lights on the solar panel, the lamp will not be ON even if the ON/OFF switch has been turned ON. During testing, other objects (hand or arm) should be used to cover the complete solar panel, then the lamp will be ON after turning on the ON/OFF switch. Select a location that is not located close to other light sources, such as for example street lighting, because this enables the lamp to be switched off automatically when set in ON setting.

Install the lamp

  1. Install back plate
    Installing the installation backplate (6) into the product and screwing it by screws (9).

  2. Drill two holes
    Drill two holes and keep the distance of two holes is around 4cm and horizontal aligned.

  3. Place dowels and screw
    Screw one of the supplied dowels (7) and a screw (8) into each of the drilled holes. Leave a small gap between the heads of the screws and the wall.

  4. Turn switch on
    Unscrewing the lampshade (5) and turn the switch (4) from OFF to ON.

  5. Place lamp
    Now, fit the product by placing it with the mounting holes on the screws.

Battery warning note

New batteries must be recharged and discharged 3~5 times before their full function use time is released. The rechargeable battery is built into the device and can be replaced when needed. Do not throw the battery into the fire, otherwise it may explode. Batteries may also explode if being damaged, please handle and disposal it according to local conditions and regulations. After 3 months long storage, need to completely discharged and recharge for at least 80%. The battery used in this device may present a risk of fire or chemical burn if mistreated. Do not disassemble, short contacts, heat above 60°C (140°F), or incinerate. Keep away from children. Do not disassemble and do not dispose of in fire.

  • Ensure that the device does not come into contact with heat sources, hot
    objects or naked flames.

  • Do not attempt to charge the device when the battery is damaged.

  • Leaks from battery cells can occur under extreme conditions. If the liquid
    gets on the skin, wash it immediately with soap and water. If the liquid gets into the eyes, flush them directly with clean water for at least 15 minutes and seek medical attention.

Operation and button use
The solar lamp can be turned on or off by the ON/OFF button:

Light on
Slide the ON/OFF button to ON to activate the lamp. The lamp will turn ON automatically at sunset/night and will be OFF during sunrise/day. This is done automatically by the internal light sensor inside the solar panel.

Light off
If you slide the ON/OFF button to OFF again, the lamp is turned OFF completely. The solar cells will charge the battery without activating the lamp. Leave the lamp in this position for at least 2 or 3 sunny days so the battery can be fully charged before using it or when not in use for longer period of times to protect the battery.

Note and warnings

  • When the product will not be used for a long time, please place the product in a place with sufficient sunlight, with a charging time for at least 1 – 3 days in OFF position. For keeping the function of the battery, you’d better comprehensively charge the product in a place with sufficient sunlight for once a month.

  • The charging time and charging efficiency of the solar panel may be affected by the weather and the installation position. Considering the conversion rate of solar power generation, if the product is used with good sunny weather conditions, it will gain higher charging efficiency and effectiveness by the solar panel and it’s battery.

  • When there’s sunlight and other lights and if the power switch is OFF, the
    LED lamp will not be lightened in day and night time.

  • The solar lamp should be installed in the place with sufficient sun light to
    ensure the solar panel will absorb sunlight sufficiently, so that the working hours of the solar lamp will be prolonged.

  • If snow or ice is on top of the solar panel please remove it at all time’s so the battery can be charged correctly by the panel.

  • This solar light is only used for domestic private and non-commercial use.

Security and important safety instructions
When using electrical products, certain precautions must be followed, including the following:

  • Choose a stable, solid and supportive surface and make sure the lights
    are set correctly.

  • This lamp is intended for outside use!

  • This is not a TOY, keep away from small children below 12 years.

  • Do not place or immerse the lamp under water like pools and ponds! It is not FULLY waterproof (IP68).

  • Do not use with appliances that could cause any fire in unattended use
    (like irons etc.).

  • Any other use as the intended way for this device is not validated for any warranty or liability.

  • o not use the device excessively and do not store them under heavy
    pressure. The device is not resistant to extreme heat.

  • Do not open or disassemble the lamp yourself, this will void the warranty
    at all times.

  • Do not disassemble, repair or modify the product by yourself as this may result into an electric shock.

  • Do not stand, sit on, jump or throw with the lamp at all times.

  • Do not throw this product in the air to avoid damage caused by falling.

  • Only use the lamp for its intended designed use as a light.

  • Under extreme conditions the battery cells can cause leaking. If that fluid touches the skin then please clean directly with water and soap. If within the eyes then clean with water for at least 10 minutes and consult a doctor.

  • Never touch the plug contacts with sharp or metal objects.

  • Use only the original power supply and original accessories.

  • Protect the device from special liquids and vapors

Read and follw all safety instructions

  • This IP44 product is suitable for outdoor use.
  • Do not install near a gas or other sources with a similar heating process.
  • Do not use the product outside its intended use.
  • Read and follow all instructions that are indicated on the product or supplied with it.
  • Keep this manual for future reference.

Instructions for use and maintenance
When disassembling, carefully remove the product from its location (ground, trees, bushes, table etc.) to avoid any pressure on the Solar Light that could damage the component elements. In case of non-use, store the product in a cool and dry place away from direct sunlight and switch to the OFF position.

Caution: NON-Replaceable LED lights! If the light has reached the end of
its life, the lamp must be disposed of in accordance with local disposal regulations.

Please note

  • Use with caution at all times.
  • Product specifications are subject to change without notice.
  • If disassemble the device without authorization, we cannot guarantee the quality.

Security and important safety instructions
 Class III equipment: This is a class III device and can only be used with low voltage power, connection only to SELV power-circuits.

Troubleshooting

Light does not turn on?

  • The solar panel is clean (if not, please clean it).

  • The solar cell was mounted so that it is able to receive as much as possible
    direct sunlight during the day.

  • The battery is sufficiently charged (if not, leave for 1~2 sunny days charging in the OFF position).

Light flashes or low light?

  • Weak battery: Let the lamp charge again for 1~2 sunny days (or 3~4 “Ordinary” days) in the OFF position.

For best results, you need to replace the battery every 24- 3 6 months. Remove the battery compartment cover on bottom of the main housing using a screw driver to remove the screws. Delete the old battery, and dispose it correctly according local law (see below). Make sure the new battery is rechargeable and is an 1x 3.7V Li-Ion 1200 mAh rechargeable 18650 battery also available at www.flinqproducts.nl.

Caution: Non-professionals please do not disassemble the lamp yourself!

Install the new battery and take care of the proper connection. Close the battery compartment with the screws and make sure the sealing is done properly.

Cleaning the device itself

  • Make sure the solar panel is kept dust free and clean. Clean it regularly with a dry cloth and with warm, soapy water. Dirty solar panels may not fully charge the battery. This can lead to premature aging of the battery and may result in unreliable operation of the device.
  • Please do not immerse the main unit in water, it is not waterproof!
  • Wipe gently with a clean soft cloth (microfiber) dampened with water or a mild detergent.
  • Do not use a strong irritant lotion such as gasoline, alcohol or rubber water.

Disposal Information

Separate collection

This symbol means the product must not be discarded with the general household waste. There is a separate collection system for these products.

Batteries and rechargeable batteries do not belong in the household waste! You are required by law to dispose of used batteries and rechargeable batteries to a collection point in your municipality or city administration or to a specialist battery dealer so please return the battery/device to the collection point which will dispose of the device and/or battery properly.

Weee

the waste electrical and electronic equipment directive 2012/19/EU:
This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources. Household user should contact either the retailer where they purchased this product or their local government office for details of where and how they can take this item for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract. This product should not be mixed with other commercial wastes for disposal. Do not dispose of batteries in your household waste. Dispose of this product and/or batteries by taking
them to your local recycling store or station for free, contact your local government office for more details. If possible please dispose the batteries separately as stated by law and let it be recycled separately or give it at your local sales store/distributor/dealer that dispose it correctly and free of charge at all times. By recycling, reusing the materials or other forms of utilizing old devices/batteries, you are making an important contribution to protecting our environment and use way.

Disclaimer
Information in this document is subject to change without notice. The manufacturer does not make any representations or warranties (implied or otherwise) regarding the accuracy and completeness of this document and shall in no event be liable for any loss of profit or any commercial damage, including but not limited to special, incidental, consequential or other damage. No part of this document may be reproduced or transmitted in  any form by any means, electronic or mechanical, including photocopying, recording or information recording and retrieval systems without the expressed written permission of the manufacturer. Our company owns all right to this unpublished work and intends to maintain this work as confidential. Our company may also seek to maintain this work as an unpublished copyright. This publication is to be used solely for the purpose of reference, operation, maintenance or repair of our equipment. No part of this can be disseminated for other purposes. In the event of inadvertent or deliberate publication, our company intends to enforce its right to this work under copyright laws as a published work. Those having access to this manual may not copy, disseminate or disclose the information in this work unless expressly authorized by our company. All information contained in this manual is believed to be correct. Our company shall not be liable for errors contained herein nor for incidental or consequential damages in connection with the furnishing, performance, or use of this material. This publication may refer to information and protected by copyrights or patents and does not convey any license under the patent rights of our company, nor the rights of others. Our company does not assume any liability arising out of any infringements of patents or other rights of third parties described at any time without notice or obligation. Also, content of the manual is subject to change without prior notice.

Warrenty
The warranty begins on the date of purchase and expires after 24 months (6 months for battery). The warranty period is considered to have started three months after the date of manufacturing indicated on the product or as derived from the serial number of the product. If any defect due to faulty materials and/or workmanship occurs within the warranty period, we will make arrangements for service. Where a repair is not possible or is deemed uneconomical we may agree to replace the product. Replacement will be offered at our discretion and the warranty will continue from the date of original purchase. The warranty applies provided the product has been handled properly for its intended use and in accordance with the operating instructions. This warranty is limited to the original buyer and not transferable.

Copyright/Trademark
This is a trademark of FlinQ Commerce BV. Other brands and product names, logos are tradenames or trademarks/logos of their rightful owners. All specifications are subject to change without any official notice.

Support, warranty and questions information: info@flinqproducts.nl

This product is designed, produced and tested in accordance with the strictest European safety directive’s and test standards.

EU-declaration of conformity

(EN ISO / IEC 17050-1)

Hereby we:

Company:
FlinQ Commerce

Authorized signature:
Signed by:

Address:
Eemweg 74
3755LD Eemnes
The Nederland

Name:
Erwin Honing

Declare under the sole responsibility that the following equipment:
Solar Lamp Dusk

Title:
CEO

Place:
3755LD Eemnes, The Netherlands

Brand:
FlinQ

Date:
11-03-2023

Product name:
Solar Lamp Dusk

Barcode / EAN:
8720168689733

Product Rating:
5.5V / 80mA, Class III, Battery 3.7V
1200mAh 4.44Wh Li-Ion

Product type:
Solar light

Production date:
2023

Produced in:
China

Conform that the products mentioned are with the following safety and hazardous substances restrictions in electrical and electronic equipment requirements of the relevant European Union harmonization directives
2014/30/EU, 2011/65/EU + (EU)2015/863 and (EU)2017/2102, No 1907/2006, (WEEE) Directive 2012/19/EU, (POP/SCCP) (EU) 2019/1021 + (EU)2020/874 and (EU)2020/1204, 2006/66/EC > 2013/56/EU + (EU)2019/1020, PAH AfPS GS 2019:01 (PAK), 94/62/EG + 2005/20/EC + (EU) 2018/852 and all amendments. Conformity Is guaranteed by the CE symbol. This product has been tested following harmonized standards and EU community legislation specifications, applying versions will be valid in 03-2023. The full text of the EU declaration of conformity is available at the following internet address: www.flinqproducts.nl

TECHNICAL CHANGES SUBJECT TO FURTHER DEVELOPMENTS

EN IEC 55015:2019+A11:2020
EN 61547:2009
EN IEC 61000-3-2:2019+A1:2021
EN 61000-3-3:2013+A1:2019+A2:2021
IEC 62321-5:2013
IEC 62321-4:2013+AMD1:2017
IEC 62321-7-1:2015
IEC 62321-7-2:2015
IEC 62321-6:2015
IEC 62321-8:2017
IEC 62321-7-2:2017
(EC) No 1907/2006
(EU) 2019/1021
2012/19/EU
AfPS GS 2019:01 PAK

FlinQ Commerce
Eemweg 74
3755 LD Eemnes
The Netherlands
www.flinqproducts.nl
info@flinqproducts.nl

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals