iOttie CHCRIO150 RapidVolt 20W Car Charger User Manual
- October 29, 2023
- iOttie
Table of Contents
RapidVolt™
20W Car Charger
USB-C Power Adapter
User Manual
Product Information
At a Glance
Product Specifications
| Item | Specification |
|---|---|
| Input | DC 12–24V/2A |
| Output | DC 5V/3A, 9V/2.22A, 12V/1.67A |
| Length | 1.04″ |
| Width | 1.04″ |
| Height | 2.29″ |
| Weight | 0.62 oz |
Using the RapidVolt Car Charger
Connecting to Power
Simply plug the RapidVolt into your vehicle’s auxiliary power outlet.
Charging Your Device
Connect your device to the RapidVolt Car Charger using a USB-C cable (not
included).
Fast charging will begin automatically.
Operation Warnings
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
RF Exposure Warning Statements:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment shall be installed and operated with
minimum distance 20cm between the radiator & body.
This device contains licence-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science and Economic
Development Canada’s licence-exempt RSS(s). Operation is subject to the
following two conditions: (1) This device may not cause interference. (2) This
device must accept any interference, including interference that may cause
undesired operation of the device.
Radio Frequency Exposure Statement for IC
This equipment complies with IC exposure limits set forth for an uncontrolled
environment. This equipment shall be installed and operated with minimum
distance 20cm between the radiator & body.
Important Safety Information
This manual contains important safety and operating instructions for the
Velox™ Magnetic Wireless Charging Duo Stand (MGSFIO202).
Please read all instructions and safety information before using this product.
If damage occurs as a result of failure to follow the instructions, the
warranty will be voided.
- Do not expose to rain, moisture, or snow.
- Do not operate this magnetic wireless charging stand if it has received a sharp blow, been dropped, or otherwise damaged in any way; take it to a qualified service person.
- Do not disassemble this magnetic wireless charging stand; take it to a qualified service person when service or repair is required. Incorrect reassembly may result in electric shock or fire.
- To reduce the risk of electric shock, unplug the device before attempting any maintenance or cleaning.
- Avoid extended exposure to direct sunlight, which may damage the device.
- Exposing this product to open flames may cause it to explode.
- Do not expose this product to strong magnetic fields.
- Use a dry, soft lint-free cloth to clean. Do not use any corrosive cleaner or oil to clean.
This product complies with the radio interference requirements of the European
Community.
This product is designed and manufactured with high quality materials and
components, which can be recycled and reused.
The product must not be discarded as household waste, and should be delivered
to an appropriate collection facility for recycling. Proper disposal and
recycling helps protect natural resources, human health and the environment.
For more information on disposal and recycling of this product, contact your
local municipality, disposal service, or the shop you bought this product.
Designed in New York City. 20 W 37th St, New York, NY 10018.
Made in China. U.S. Patent Pending ©2021 iOttie. All rights reserved. iOttie
and Velox are registered trademarks owned by iOttie, Inc. John 3:16
Apple, the Apple logo, iPhone, iPod, iPod touch, Mac, macOS, Magsafe and Siri
are trademarks of Apple Inc., registered in the U.S. and other countries.
The Velox Magnetic Wireless Charging Duo
Stand is backed by a 2 year warranty.
Documents / Resources
|
iOttie CHCRIO150 RapidVolt 20W Car
Charger
[pdf] User Manual
CHCRIO150 RapidVolt 20W Car Charger, CHCRIO150, RapidVolt 20W Car Charger, Car
Charger
---|---