iottie Velox Magnetic Mini Flush Mount Car Phone Holder User Manual
- June 9, 2024
- iOttie
Table of Contents
iottie Velox Magnetic Mini Flush Mount Car Phone Holder
Product Information
At a Glance
Device Compatibility
Velox products are designed for use with MagSafe compatible iPhones and cases.
Compatible devices include the iPhone 13, iPhone 13 mini, iPhone 13 Pro,
iPhone 13 Pro Max, and the iPhone 12 series.
iOttie is not liable for possible damages due to product misuse.
Product Specifications
Item | Specification |
---|---|
Length | 2.28″ |
Width | 2.3″ |
Height | 2.38″ |
Weight | 1.57 oz |
Installing the Velox Flush Mount
Attaching the Flush Mount
-
Choose a flat area on the vehicle’s dashboard and wipe any dust or debris from the surface.
NOTE: For vehicles with leather dashboards, we recommend mounting on the windshield. -
Peel off the film on the base of the flush mount.
-
Press the flush mount evenly onto the desired installation location for 30 seconds. Wait 20 minutes before mounting your phone.
- The adhesive base features a semi-permanent tape. Once the mount is removed, it cannot be re-mounted.
- When mounting, it is recommended that the surface and product be above 65°F.
- When removing the flush mount, please use caution. We recommend removing slowly from the edge to avoid damage.
Mounting Your iPhone
Simply tap your MagSafe iPhone against the mounting face and the magnets will
hold it in place. You are now ready to start driving.