VIDEX VLF-A055 LED Portable Flashlight User Manual
- June 9, 2024
- VIDEX
Table of Contents
VLF-A055 LED Portable Flashlight
User Manual 
Beam
Distance
TECHNICAL PARAMETERS
| | **HIGH*| LOW| MOON| STROBE**
---|---|---|---|---|---
1| | 600Lm| 150Lm| 30Lm| 600Lm
2| | 1h 40min| 2h 45min| 13h| 1h 40min
3| | 115m| 54m| 20m| 115m
4| | 3320cd| 640cd| 300cd| 3320cd
5| | 5700 K
6| | LUMINUS SST20, 10W
7| | Li-ion 16340, 3.7V
8| | Type-C, 5V 0.5А
9| | 2.5 h
10| | IP68
11| | 1 m
12| | 74.5х24х27 mm
13| | 44 g (without battery)
Battery charge indication
charge 100-80%| charge 79-50%| charge 49-25%| charge 24-1%
Connect Type-C cable to charge
TECHNICAL PARAMETERS
- Output.
- Runtime.
- Distance.
- Intensity.
- Correlated color temperature.
- LED type.
- Compatible battery.
- Charging port type, voltage and current.
- Charging time.
- Dust and moisture protection level.
- Impact resistance.
- Product sizes.
- Product weight (without battery).
- Color: black.
- Optical system type: textured refl ector
- Materials: Aviation anodized aluminum, tempered glass.
Note: Runtime, Distance, Intensity and Charging time results tested with a stock battery Videx 16340 800mAh. The above mentioned parameters may vary between environments and actual batteries used.
MAIN FEATURES
Maximum brightness 600 lumens in an ultra-compact body;
Water resistance IP68 (short-term immersion under water to a depth of 2
meters)
Built-in charging port.
Comfortable tactile button with battery indicator.
INCLUDED
- Flashlight VLF-A055;
- Li-ion rechargeable battery Videx 16340 800mAh;
- Charging cable;
- Metal clip;
- Lanyard;
- Spare O-rings;
- User’s manual.
LIGHTING MODES
High – high brightness
Low – low brightness
Moon – minimum brightness
Strobe – flashing light
OPERATING INSTRUCTION
Short press the button – turn ON the light, switch between modes and turn
OFF the light cyclically.
Long press the button with the light switched on – turn OFF the light.
Long press with the light switched off – turn on the last remembered
mode.
BATTERY STATUS INDICATION
The battery status is continuously displayed when the light is turned on.
Continuous green light – 100-80% charge;
Flashing green light – 79-50% charge;
Continuous red light – 49-25% charge;
Flashing red light – critical charge 24-1%.
CHARGING
Plug the USB-A socket of the charging cable into electrical outlet.
Switch off the light, open the protective cover and connect the charging cable
to the flashlight port.
When charging, the indicator glows red. When fully charged, the indicator
glows green.
After a full charge, unplug the charging cable and close the protective cover
to prevent water and dust from entering the flashlight body.
© The original batteries are supplied charged and can be used immediately
after purchase, however it is recommended that the battery be fully charged
before first use. The battery needs to be charged in time before it is
completely discharged. During long periods of storage, it is recommended to
keep the battery charging level at about half capacity to extend its service
life.
BATTERY REPLACEMENT
a) Unscrew the bottom lid of the flashlight counterclockwise;
b) Insert the battery with the (+) contact towards the head of the flashlight;
c) Screw the base all the way in and test the flashlight.
MAINTENANCE AND SAFETY INSTRUCTIONS
- For long-term storage, it is necessary to remove the batteries from the flashlight.
- It is recommended to regularly lubricate the rubber seals and threaded parts of the flashlight to prevent premature wear and ensure the waterproof housing. If the rubber rings are damaged, they must be replaced.
- ATTENTION. Avoid direct light into eyes as it may cause the eyes damage.
- The flashlight can accumulate a significant amount of heat when used for a long time, which can cause the body to become hot. Therefore, be careful to avoid burns.
- Do not use batteries other than those specified in the technical specifications.
- Do not disassemble the flashlight head as this may compromise performance and void the warranty.
- Keep out of the reach of children.
WARRANTY
The warranty for the flashlight is 3 years, for the battery – 1 year.
The warranty does not cover accessories. The LED source inside the flashlight
is not replaceable. If the LED fails, the whole flashlight should be replaced.
During the warranty period, a faulty flashlight and battery can exchanged or
returned with the prove of purchase and all accessories saved.
The following does not apply with the scope of limited warranty:
- Misuse the product and cause the products integral components damage;
- Unauthorized disassemble or the presence of deep mechanical damage to the product;
- Damage due to force majeure.
ENVIRONMENTAL PROTECTION
Pursuant to the provisions of the WEEE Act, it is forbidden to put waste
equipment marked with the symbol of a crossed bin together with other waste.
The user, wishing to get rid of electronic and electrical equipment, is
obliged to return it to a waste equipment collection point. There are no
hazardous components in the equipment that have a particularly negative impact
on the environment and human health.
The producer shall not be responsible for any damage resulting from the
failure to follow above instructions. The producer reserves the right to make
updates of this user’s manual.
Producer/Producent: Allegro Opt Sp. z
o.o., Handlowa 23, 05-120 Legionowo,
Poland. Made in P.R.C.