nanoleaf NL47-7003TW-SPK Shapes Triangles Smarter Kit User Guide

June 4, 2024
nanoleaf

nanoleaf NL47-7003TW-SPK Shapes Triangles Smarter Kit
logo

nanoleaf NL47-7003TW-SPK Shapes Triangles Smarter Kit

nanoleaf NL47-7003TW-SPK Shapes Triangles Smarter Kit
product

  • Light Panels
  • Mounting Plates
  • Mounting Tape
  • Linkers
  • Controller
  • Power Supply

Important 1nstarlation Tips

  • Make sure you have enough PSUs for your layout NOTE: Each standard PSU supports up o 42W and each Controller supports up to 500 panels. Use our PSU calculator at nanoleaf.me/my shapes.
    nanoleaf NL47-7003TW-SPK Shapes Triangles Smarter Kit
02

  • Before mounting your panels, clean your surface to be free of dust. moisture and oil.
    nanoleaf NL47-7003TW-SPK Shapes Triangles Smarter Kit
03

  • To mount, apply strong pressure in a c1rculor motion o he center of the panel for 30 seconds.
    nanoleaf NL47-7003TW-SPK Shapes Triangles Smarter Kit
04

  • The Controller and Power Supply can be connected to any panel in your setup.
    nanoleaf NL47-7003TW-SPK Shapes Triangles Smarter Kit
05

  • Tope is NOT suitable for textured, porous, popcorn and ceiling surfaces (le. wallpaper or brick walls).
    nanoleaf NL47-7003TW-SPK Shapes Triangles Smarter Kit
06

nanoleaf NL47-7003TW-SPK Shapes Triangles Smarter Kit
07
nanoleaf NL47-7003TW-SPK Shapes Triangles Smarter Kit
08
nanoleaf NL47-7003TW-SPK Shapes Triangles Smarter Kit
09
nanoleaf NL47-7003TW-SPK Shapes Triangles Smarter Kit
10
nanoleaf NL47-7003TW-SPK Shapes Triangles Smarter Kit
11
nanoleaf NL47-7003TW-SPK Shapes Triangles Smarter Kit
12

WARNINGS & CAUTIONS
Please read this safety information carefully and keep this document for future reference. Help articles and customer support is always available at
https://helpdesk.nonoleof.me. This Nonoleaf@ product is not designed, certified. nor intended for use in: enclosed locations that limit the flow of air and/or trap heat which contributes to an environment temperature over 40 degrees Celsius; emergency exits, emergency lighting, or other use cases involving critical systems for human safety, in conjunction with 3rd party devices that ore not approved by Nonoleaf@ for use with Nanoleaf® products; locations or use cases where there is a risk of electric shock, outdoor areas, regardless of weather conditions; wet or damp conditions; as a floor covering or floor tiling, excessively hot environments that ore consistently above 40 degrees Celsius for extended periods of time (for example: near ovens, space heaters, clothing dryers), excessively humid areas; regions or countries other than that in which the product was intended for and certified for sale in. When using this Nonoleaf (!l products, do not open or disassemble the device, as this will void the warranty and make the product unsafe for use. While connected to the electrical supply of the building, line voltages will be present in the power supply, panels, linkers, so do not place any metallic or conductive objects near any exposed metal contacts on any component. Unplug the power supply urnt from the power source before dismounting light panels. Do not allow small children to operate this device without adult supervision. This device contains small parts that may be o choking hazard to small children. Loose or dangling cords may cause on entanglement hazard to small children. Do not leave cords dangling or loose on the floor to help prevent accidents from tnpp1ng. Do not clean the device with liquid or sprays when 1t ,s connected to power. Clean the panels with a soft dry cloth, and do not use harsh cleaning agents. Do not step on any part of the device, as this will cause breakage. Do not submerge any port of the device in water, or expose any part of the device to water. Do not bend or flex the panels with the connector still attached, as this will cause breakage. Do not attach the panels together with any connector or device other than original equipment manufactured by Nanoleaf@. Do not puncture any port of the device with sharp objects, as this will cause the device to cease working as designed and may present a safety hazard. If adhesive tape is o component of this product. please note that 1t 1s not designed to be used with brick wall, wallpaper, uneven/textured surfaces. or highly porous surfaces. Do not use double-sided tape to attach any port of the device to a ceiling or surface greater than 90 degrees relative to the floor, as the device will eventually fall down-creating a safety hazard and risk of damage to the device. Optional secure screw mounting solutions for these use cases ore available, sometimes through added accessories offered for purchase separately. Your warranty DOES NOT COVER damage caused by falling devices. The flexible coble and power supply cannot be replaced by another third party product If the coble is damaged, the entire controller and power supply should only be replaced with original equipment manufactured by Nonoleaf<!:. Using any nonapproved replacement component will void the warranty and may present a serious safety hazard. Nanoleaf® light panels ore primarily Intended for decorative use, with RGBW output function that can dim.
WI-FI/RF This equipment hos been tested and found to comply with the limits of o Class 8 digital device, pursuant to port 15 of the FCC Rules and the Canadian ICES-003 Class 8 specifications. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and con radiate radio frequency energy and, if not Installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which con be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver Connect the equipment into on outlet on o circuit different from that to which the receiver is connected Consult the dealer or on experienced radio/TV technician or visit www.nonoleof.me/support.
FREQUENCY RANGE

  • 2 4GHz W1-Fi: 2412-2462 MHz, Mox RF e.i,r.p power< 20 dBm
  • 2.4GHz Radio: 2402-2480 MHz, Mox RF e.i,r.p power<1O dBm
  • NFC: 13.56MHz, Mox RF e.1.r.p power O dBm

CE INFORMATION
The external flexible coble or cord of this lum1noire cannot be replaced; if the cord is damaged, the lum1no1re shall be destroyed. The light source contained ,n this lumino1re shall only be replaced by the manufacturer or this service agent or a similar qualified person. Nano Grid Limited (Nonoleaf) hereby declares that this device 1s in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. The declaration of conformity is available at www.nonoleof.me/eudoc/.
WARRANTY INFORMATION
This product is covered by a limited warranty from Nanoleof,1 .• a two year complimentary replacement of defective hardware. For full details visit: nanoleof.me/warranty.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals