nanoleaf Shapes Triangle Starter Kit 9 Panels User Guide

: June 9, 2024
: nanoleaf

Table of Contents

nanoleaf Shapes Triangle Starter Kit 9 Panels
WARNINGS & CAUTIONS
What In Box
POWER
Important Installation Tips
Installation Steps
Features
FREQUENCY RANGE
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

nanoleaf Shapes Triangle Starter Kit 9 Panels

WARNINGS & CAUTIONS

Please read this safety information carefully and keep this document for future reference. Help articles and customer support is always available at https://go.nanoleaf.me/support.
This Nanoleaf® product is not designed, certiﬁed, nor intended for use in: enclosed locations that limit the ﬂow of air and/or trap heat which contributes to an environment temperature over 40 degrees Celsius; emergency exits, emergency lighting, or other use cases involving critical systems for human safety; in conjunction with 3rd party devices that are not approved by Nanoleaf® for use with Nanoleaf® products; locations or use cases where there is a risk of electric shock; outdoor areas, regardless of weather conditions; wet or damp conditions; as a ﬂoor covering or ﬂoor tiling; excessively hot environments that are consistently above 40 degrees Celsius for extended periods of time (for example: near ovens, space heaters, clothing dryers); excessively humid areas; regions or countries other than that in which the product was intended for and certiﬁed for sale in.
When using this Nanoleaf® products, do not open or disassemble the device, as this will void the warranty and make the product unsafe for use.
While connected to the electrical supply of the building, line voltages will be present in the power supply, panels, linkers, so do not place any metallic or conductive objects near any exposed metal contacts on any component. Unplug the power supply unit from the power source before dismounting light panels.
Do not allow small children to operate this device without adult supervision.
This device contains small parts that may be a choking hazard to small children. Loose or dangling cords may cause an entanglement hazard to small children. Do not leave cords dangling or loose on the ﬂoor to help prevent accidents from tripping.
Do not clean the device with liquid or sprays when it is connected to power.
Clean the panels with a soft dry cloth, and do not use harsh cleaning agents.
Do not step on any part of the device, as this will cause breakage.
Do not submerge any part of the device in water, or expose any part of the device to water.
Do not bend or ﬂex the panels with the connector still attached, as this will cause breakage.
Do not attach the panels together with any connector or device other than original equipment manufactured by Nanoleaf®. Do not puncture any part of the device with sharp objects, as this will cause the device to cease working as designed and may present a safety hazard. If adhesive tape is a component of this product, please note that it is not designed to be used with brick wall, wallpaper, uneven/textured surfaces, or highly porous surfaces.
Do not use double-sided tape to attach any part of the device to a ceiling or surface greater than 90 degrees relative to the ﬂoor, as the device will eventually fall down—creating a safety hazard and risk of damage to the device. Optional secure screw mounting solutions for these use cases are available, sometimes through added accessories offered for purchase separately. Your warranty DOES NOT COVER damage caused by falling devices.
The ﬂexible cable and power supply cannot be replaced by another third party product. If the cable is damaged, the entire controller and power supply should only be replaced with original equipment manufactured by Nanoleaf®.
Using any non-approved replacement component will void the warranty and may present a serious safety hazard.
Nanoleaf products are primarily intended for decorative use. This product is a containing product with multiple light sources and one control gear which can be replaced when the end of its life cycle is reached. Each light source is rated energy class G. The light sources or separate control gear are not intended for use in other applications.
WI-FI/RF This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to part 15 of the FCC Rules and the Canadian ICES-003 Class B speciﬁcations.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician or visit https://go.nanoleaf.me/support.

What In Box

$nanoleaf-Shapes-Triangle-Starter-Kit-9-Panels-fig- $1$$ Help

$nanoleaf-Shapes-Triangle-Starter-Kit-9-Panels-fig- $2$$

User Manual & Warranty Registration
go.nanoleaf.me/myshapes

POWER

$nanoleaf-Shapes-Triangle-Starter-Kit-9-Panels-fig- $3$$

Important Installation Tips

Make sure you have enough PSUs for your layout. NOTE: Each standard PSU supports up to 42W and each Controller supports up to 500 panels. Use our PSU calculator at go.nanoleaf.me/myshapes. $nanoleaf-Shapes-Triangle-Starter-Kit-9-Panels-fig- $4$$
Before mounting your panels, clean your surface to be free of dust, moisture and oil
To mount, apply strong pressure in a circular motion to the center of the panel for 30 seconds.
The Controller and Power Supply can be connected to any panel in your setup.
Tape is NOT suitable for textured, porous, popcorn and ceiling surfaces (ie. wallpaper or brick walls).

Installation Steps

$nanoleaf-Shapes-Triangle-Starter-Kit-9-Panels-fig- $9$$ $nanoleaf-Shapes-Triangle-Starter- Kit-9-Panels-fig- $10$$ $nanoleaf-Shapes- Triangle-Starter-Kit-9-Panels-fig- $11$$ $nanoleaf-Shapes-Triangle-Starter-Kit-9-Panels-fig- $12$$

Features

FCC ID : 2AEWY-NL42
IC: 20489-NL42

Power Supply Specs:

Input Voltage: 100-240V~50/60Hz
Max Power: 42W
Communication Protocol: Wi-Fi (2.4GHz b/g/n); 2.4GHz proprietary

FREQUENCY RANGE

2.4GHz Wi-Fi: 2412-2462 MHz, Max RF e.i.r.p power < 20 dBm
2.4GHz Radio: 2402-2480 MHz, Max RF e.i.r.p power<10 dBm
NFC: 13.56MHz, Max RF e.i.r.p power 0 dBm

CE INFORMATION The external ﬂexible cable or cord of this luminaire cannot be replaced; if the cord is damaged, the luminaire shall be destroyed. The light source contained in this luminaire shall only be replaced by the manufacturer or this service agent or a similar qualiﬁed person. NanoGrid Limited (Nanoleaf) hereby declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. The declaration of conformity is available at https://go.nanoleaf.me/eudocs.

WARRANTY INFORMATION

This product is covered by a limited warranty from Nanoleaf®: a two-year complimentary replacement of defective hardware. For full details visit: https://go.nanoleaf.me/warranty.

Disposal

Disposal of your old product: Your product is designed and manufactured with high-quality materials and components, which can be recycled and reused. When this crossed-out wheelie bin symbol is attached to a product, it means that the product is covered by European Directive 2012/19/EU. Please ﬁnd out about your local collection system for electrical and electronic products. Please act according to your local rules and do not dispose of your old products with your normal household waste. The correct disposal of your old product will help to prevent potential negative consequences for the environment and human health.

Nanoleaf Canada #400 – 100 Front Street East Toronto, ON M A 1E1, Canada
Nanoleaf Europe SAS 11 Rue de Lourmel 75015 Paris
France Manufacturer NanoGrid Limited #1301-483A Castle Peak Road, Kowloon, Hong Kong

Models: