SUPERATV 209061547 Trailing Arm Kit Instruction Manual

: June 17, 2024
: SUPERATV

Table of Contents

SUPERATV 209061547 Trailing Arm Kit
Product Usage Instructions
INSTALLATION INSTRUCTIONS
Liability Statement
Documents / Resources

SUPERATV 209061547 Trailing Arm Kit

SUPERATV-209061547-Trailing-Arm-Kit-product

Product Specifications

Product Name: Trailing Arm Kit for Can-Am Outlander
Model: IN-RTA-CA-GEN2-OHC
Compatibility: Can-Am Outlander

Product Usage Instructions

Step 1: Preparation

Keep all components removed from the machine.
Raise the rear of the machine off the ground and secure it with jack stands.

Step 2: Removal

Remove Wheels, Axle Nuts, Caliper, Brake Line, and Hub.
Remove Shocks and Sway Bar Linkages from Swing Arms.
Remove Swing Arms. (Use only the outermost Spacers when installing new Swing Arms.)

Step 3: Installation of Trailing Arms

Install the Right Trailing Arm onto the Axial Pivot and secure it with stock hardware and Outer Spacers.
Repeat the same process for the Left Trailing Arm.

Step 4: Attachment of Components

Secure Sway Bar Linkages to Trailing Arms with stock hardware.
Secure Shocks to Trailing Arms with appropriate hardware.
It is recommended to use Loc-Tite on Nuts during installation.

Step 5: Final Assembly

Reinstall Hub, Caliper, and Axle Nut.
Connect the provided Brake Line and secure it with the hardware provided.

Frequently Asked Questions (FAQ)

Q: What should I do if I encounter difficulties during installation?

A: If you encounter any issues during installation, please contact our customer support at sales@superatv.com or call 1-855-743-3427 for assistance.

INSTALLATION INSTRUCTIONS

Trailing Arm Kit: for Can-Am Outlander SUPERATV-209061547-Trailing-Arm-
Kit-fig-1

Do not discard packaging until the product has been successfully installed.

Liability Statement

SuperATV’s® products are designed to best fit user’s ATV/UTV under stock conditions. Adding, modifying, or fabricating any factory or aftermarket parts will void any warranty provided by SuperATV® and is not recommended. SuperATV’s® products could interfere with other aftermarket accessories. If the user has aftermarket products on the machine, contact SuperATV® to verify that they will work together.
Although SuperATV® has thousands of satisfied customers, users should be aware that installing lift kits, long travel, suspension kits, tires, etc. will change the ride of the machine and may increase maintenance and part wear. Operating any off-road machine while, or after, consuming alcohol and/or drugs increases the risk of bodily harm or death. No warranty or representation is made as to this product’s ability to protect users from severe injury or death. SuperATV® urges operators and occupants to wear a helmet and appropriate riding gear at all times.
By purchasing and installing SuperATV® products, the user agrees that should damages occur, SuperATV® will not be held responsible for loss of time, use, labor fees, replacement parts, or freight charges. SuperATV®, nor any 3rd party, will not be held responsible for any direct, indirect, incidental, special, or consequential damages that result from any product purchased from SuperATV®. The total liability of the seller to the user for all damages, losses, and causes of action, if any, shall not exceed the total purchase price paid for the product that gave rise to the claim.
SuperATV® will warranty only parts provided by SuperATV®. Any damage or problems with OEM housings, bearings, seals, or other manufacturers’ products will not be covered by SuperATV®. SuperATV® parts and products are not warranted if the item was not installed properly, misused, or modified.
Installing, adding, modifying, or fabricating any factory or aftermarket product to your ATV/UTV may violate certain local, state, and federal laws. Be advised that laws vary depending on town, city, county, state, etc. Use of certain products on public streets, roads, or highways may violate the law. The Buyer is solely and exclusively legally and personally responsible for any violation of the law by the installation or use of the product. You must abide by all local, state, and federal laws, including but not limited to vehicle safety, traffic laws, and ordinances. It is your responsibility to know the laws and how they apply to you.
The Buyer is responsible for fully understanding the capability and limitations of his/her vehicle according to manufacturer specifications, warnings, and instructions and agrees to hold SuperATV® harmless from any damage resulting from failure to adhere to such specifications, warnings, and/ or instructions. The Buyer is also responsible to obey all applicable federal, state, and local laws and ordinances when operating his/her vehicle while using this product, and the Buyer agrees to hold SuperATV® harmless from any violation thereof.
Keep all components removed from the machine.
Raise the rear of the machine off the ground and secure it with jack stands.
Remove Wheels, Axle Nuts, Caliper, Brake Line and Hub.
From Swing Arms remove Shocks and Sway Bar Linkages.
Remove Swing Arms. (Only outer most Spacers will be used when installing new Swing Arms. Ball Bearings, Seals, and inner Spacers are included and pre-assembled in new Swing Arms).
Leave Axial Pivot in place.
Do not tighten the hardware completely unless noted.
Install the Right Trailing Arm onto the Axial Pivot and secure it with stock hardware and Outer Spacers.
Repeat for the Left Trailing Arm.
Secure Sway Bar Linkages to Trailing Arms with stock hardware.
Secure Shocks to Trailing Arms with hardware shown.
SuperATV recommends using Loc-Tite on Nuts when installing.
Reinstall Hub, Caliper, and Axle Nut.
Connect the provided Brake Line and secure it with the hardware shown.