LITEGEAR AC-DC200 LiteMat Spectrum LiteDimmer Spectrum User Guide

LITEGEAR AC-DC200 LiteMat Spectrum LiteDimmer Spectrum User Guide

Fixtrure Back

1. Pixel Control Cover
2. Mount Plate
3. PDX Connector
4. Inline Fuse Block
5. Spectrum Light Engine
6. Protective Clear Film
7. Velcro Border
8. Mounting Eyelets

https://www.litegear.com/litemat-spectrum/resources/

Best practice for connecting to and disconnecting from the PDX connector.

1. Toggle the Power Switch to the OFF position.
2. Insert the cable connector into the PDX OUT port until the connector locks in place.
3. Toggle the Power Switch to the ON position.

Best practice for connecting to and disconnecting from the Battery connector.

1. Toggle the Power Switch to the OFF position.
2. Insert the cable connector into the BATTERY IN port until the connector locks.
3. Toggle the Power Switch to the ON position.

NOTE: The PDX and Battery connectors are not intended to be connected and disconnected when the dimmer is powered on.

https://www.litegear.com/litemat-spectrum/resources/

BEFORE USE, SCAN OR GO TO: LITEGEAR.COM/LDS200400

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>