Electrolux EUT6NE18S Freezer Instruction Manual
- June 15, 2024
- Electrolux
Table of Contents
Electrolux EUT6NE18S Freezer
Product Information
Specifications
- Model: T20
- Dimensions:
- Minimum width: 38 mm
- Minimum depth: 560 mm
- Minimum height: 550 mm
- Maximum height: 1780 mm
- Required clearance:
- Minimum top clearance: 38 mm
- Minimum side clearance: 38 mm
- Minimum ventilation area: 200 cm2
- Rotation angle: 90 degrees
Product Usage Instructions
Step 1: Prepare the Installation Area
Ensure that the installation area has a minimum width of 38 mm, a minimum
depth of 560 mm, and a minimum height of 550 mm. Also, make sure there is a
minimum top clearance of 38 mm and a minimum side clearance of 38 mm.
Additionally, ensure that there is a minimum ventilation area of 200 cm2.
Step 2: Mounting the Fridge/Freezer Sliding Door Column
Follow the steps below to mount the sliding door column:
- Attach component A1 to the left side of the installation area using the provided screws (6x).
- Attach component A2 to the right side of the installation area using the provided screws (6x).
- Attach component B to the top of the installation area using the provided screws (14x).
- Attach component C to the bottom of the installation area using the provided screws (2x).
- Attach component D to the left side of the sliding door column using the provided screws (1x).
- Attach component E to the right side of the sliding door column using the provided screws (1x).
- Attach component F to the top of the sliding door column using the provided screws (3x).
- Attach component G to the bottom of the sliding door column using the provided screws (2x).
- Ensure that the rotation angle is set to 90 degrees.
Step 3: Finalize Installation
Complete the installation by following these final steps:
- Attach component G to the top of the sliding door column using the provided screws (4x).
- Ensure that there is a 4 mm gap between components G and G.
- Attach component H to the top of the sliding door column using the provided screws (2x).
- Ensure that there is a 43 mm gap between components H and F.
- Attach component D to the bottom of the sliding door column using the provided screws (1x).
- Attach component E to the bottom of the sliding door column using the provided screws (1x).
- Ensure that there is a 40 mm gap between components H and F.
- Ensure that there is a 90-degree angle between components F and F.
- Attach component B to the back of the installation area using the provided screws (1x).
- Ensure that there is a minimum 2 mm gap between components B and B.
- Attach component D to the front of the sliding door column using the provided screws (1x).
- Attach component E to the front of the sliding door column using the provided screws (1x).
- Ensure that there is a 10 mm maximum gap between components F and F.
- Attach component B to the top of the installation area using the provided screws (1x).
- Ensure that there is a minimum 2 mm gap between components B and B.
- Attach component D to the back of the sliding door column using the provided screws (1x).
- Attach component E to the back of the sliding door column using the provided screws (1x).
- Ensure that there is a minimum 2 mm gap between components B and B.
- Attach component F to the bottom of the sliding door column using the provided screws (1x).
- Attach component F to the front of the sliding door column using the provided screws (1x).
Frequently Asked Questions (FAQ)
Q: Where can I find more information about installing this product?
A: For more information on installing this product, please visit our YouTube
channel at www.youtube.com/electrolux
or www.youtube.com/aeg.
TOOLS REQUIRED
WHAT IN BOX
DIMENSION
WARNING
Installation Instruction
Warning! Before proceeding with installation, read the safety information in the User Manual
“How to install your Fridge/Freezer Sliding Door Column Installation”
www.youtube.com/electrolux
www.youtube.com/aeg
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>