nanoleaf NL69 4D Screen Mirror Kit User Manual
- May 15, 2024
- nanoleaf
Table of Contents
nanoleaf NL69 4D Screen Mirror Kit
TECHNICAL DATA
Models: NL69KTI1X; NL69El11X; NL69KTI2X; NL69Ell2X; NL69K113X; NL69E113X;
NL69K114X; NL69E114X; NL69Kl15X; NL69ETISX cx· con be 0 – 9, stands for
internal production code] Produet name: Nonole of 40 light strip
Rating Input: 100- 240V AC 60Hz
Rated Power: 24W
PSU Max Power : 24\V
Color Temperature: RGB
FCC 10: 2AEWY- NL69
IC: 2AEWY- NL69
Setup Step 1
Skip to Step C if you hove the Screen Mirror Kit (Camera Only)
A. Wipe t he back of your screen to ensure it is dry and clean. OPTIONAL
Use the tape provided and attach corner brackets to the back of the screen (at
least 1· away from the edge).
B. Adhere the light strip around the back of your screen (bending around
corner brackets, if used).
C. Place the camera a bow the screen using the included mount QR on a
surface below the screen without the mount (secure to surface with tape if
desired).
D. Connect the light strip and camera cables into the Controller (secure
to the back of your screen with tape if desired), and plug in to power.
Step 2 Download the App & Pair
Still Need Help?
Visit go.nanoleaf.me/my4d for more detailed
instructions.
WARNINGS & CAUTIONS
Please read this safety information carefully and keep this document for future reference. Help articles and customer support is always available at https:/ / nonoleof.me/ support. This Nanoleof® product is not designed, certified, nor intended for use in: emergency exits, emergency lighting, or other use cases involving critical systems for human safety; outdoor areas, regardless of weather conditions; regions or countries other than that in which the product was intended for and certified for sole in. When using this Nanoleof® product: Do not open or disassemble the device, as this will void the warranty and make the product unsafe for use. The flexible coble and power supply cannot be replaced by another third party product. If the coble is damaged, the entire controller and power supply should only be replaced with original equipment manufactured by Nanoleof®. Using any non-approved replacement component will void the warranty and may present a serious safety hazard. Only use the control provided with or specific by these instructions to control the lamp. The lamp of this device will not operate properly when connected to a standard (incandescent) dimmer or dimming control. Availability and performance of certain features ore service-, device-, and network- dependent and may not be available in all areas. All features, functionality, and product specifications ore subject to change without notice or obligation. The light sources or separate control gear ore not intended tor use in other applications combined. The light source of this device is not replaceable. When the light source reaches its end of life, the whole luminaire shall be replaced. This Nanoleof product is primarily intended for decorative use, with RGBW output function that con dim. Each light source is rated energy class G.
CLEANING & MAINTENANCE
Do not clean the device with liquid or sprays when it is connected to power. Cleon with a soft dry cloth, and do not use harsh cleaning agents. Manage in accordance with disposal lows in your area.
WARRANTY INFORMATION
Nanoleof® warrants that this device’s hardware components will be free from
defects in material end workmanship for a period of two (2) years from the
dote of purchase, unless a different period is stated in or on the packaging
of the product, based on up to 3 hours overage working Torie per day/7 days
per week, when used as directed (the •warranty Period•). This limited warranty
only applies to the hardware components contained in the original packaging.
This limited warranty does not apply to any software, even if packaged or sold
with the hardware components. Nanoleof® does not warrant that use of this
device will be uninterrupted or error- free. If tins device does not conform
to this limited warranty, Nanoleof® will send you, at its election, a
replacement device or refund your original price upon receipt of the returned
device, register receipt and proof of pruinose. Please reach out to our
customer support to find out how to return the device. This limited warranty
does not cover devices subject to occident, neglect, abuse, misuse or acts of
God.
REPLACEMENT OR REFUND IS YOUR SOLE REMEDY. EXCEPT TO THE EXTENT PROHIBITED BY
APPLICABLE LAW, ANY IMPLIED WARRANTIES ARE LIMITED IN DURATION TO THE DURATION
OF THIS LIMITED WARRANTY. LIABILITY FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES IS
HEREBY EXPRESSELY EXCLUDED. Some states and provinces do not allow exclusion
of incidental or consequential damages, so the above limitation or exclusion
may not apply to you. This limited warranty gives you specific legal rights,
and you may also hove other rights which vary from state to state and province
to province. For full details visit https://nonoleof.me/ warranty.
FCC
This device complies with port 15 of the FCC Rules. Operation is subject to
the following two conditions: (1This device may not cause harmful
interference, and (2l this device must accept any interference received,
including interference that may cause undesired operation. This equipment
should be installed and operated with minimum distance of 20 cm between the
radiator and your body.
NOTE: This equipment hos been tested and found to comply with the limits for a
Closes B digital device, pursuant to port 15 of the FCC Rules. These limits
ore designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses and con radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which con be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into on outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or on experienced radio/TV technician for help.
MODIFICATION: Any changes or modifications not expressly approved by the grantee of this device could void the user’s authority to operate the device.
IC
This device contains licence-exempt transmitter (s)/ receiver(that comply with
Innovation, Science and Economic Development Canada’s licence-exempt RSS(s).
Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
This equipment complies with IC radiation exposure limits set forth for on uncontrolled environment. This equipment should be installed and operated with minimum distance of 20 cm between the radiator and your body.
CUSTOMER SUPPORT
Hanoleaf Europe SAS P/ A 4 Eyes Ltd, Bay House, Cocks Hill, Perranzabuloe,
Cornwall TR6 OAT,
United Kingdom
@nanoleaf
@nanoleafofficial
/thenanoleaf
Learn more at nanoleaf.me
