nanoleaf 374NL523PK Expansion Pack Wood User Guide

June 4, 2024
nanoleaf

nanoleaf-374NL523PK-Expansion-Pack-Wood-LOGO

nanoleaf 374NL523PK Expansion Pack Wood

Quick Start Guide

nanoleaf-374NL523PK-Expansion-Pack-Wood-
FIG-1
Important Installation Tips nanoleaf-374NL523PK-Expansion-Pack-Wood-
FIG-5

REQUIRES A NANOLEAF ELEMENTS SMARTER KIT (STARTER KIT)

WARNINGS & CAUTIONS

Please read this safety information carefully and keep this document for future reference. Help articles and customer support is always available at helpdesk.Nanoleaf.me. This Nanoleaf® product is not designed, certified, nor intended for use in: enclosed locations that limit the flow of air and/or trap heat which contributes to an environment temperature over 40 degrees Celsius; emergency exits, emergency lighting, or other use cases involving critical systems for human safety; in conjunction with 3rd party devices that are not approved by Nanoleafe for Use with Nanoleafo products; locations or use cases where there is a risk of electric shock; outdoor areas, regardless of weather conditions; wet or damp conditions; as a floor covering or floor tiling; excessively hot environments that are consistently above 40 degrees Celsius for extended periods of time (for example near ovens, space heaters, clothing dryers); excessively humid areas; regions or countries other than that in which the product was intended for and certified for sale in. When using this Nanoleafe product, do not open or disassemble the device, as this will void the warranty and make the product unsafe for use. While connected to the electrical supply of the building, line voltages will be present in the power supply, panels, and linkers, so do not place any metallic or conductive objects near any exposed metal contacts on any component. Unplug the power suppily unit from the power source before dismounting light panels. Do not allow small children to operate this device without adult supervision. This device contains small parts that may be a choking hazard to small children. Loose or dangling cords may cause an entanglement hazard to small children. Do not leave cords dangling or loose on the floor to help prevent accidents from tripping. Do not clean the device with liquid or sprays when it is connected to power. Clean the panels with a soft dry cloth, and do not use harsh cleaning agents. Do not step on any part of the device, as this will cause breakage. Do not submerge any part of the device in water, or expose any part of the device to water. Do not bend or flex the panels with the connector still attached, as this will cause breakage. Do not attach the panels together with any connector or device other than original equipment manufactured by Nanoleaf@. Do not puncture any part of the device with sharp objects, as this will cause the device to cease working as designed and may present a safety hazard. If the adhesive tape is a component of this product, please note that it is not designed to be used with a brick wall, wallpaper, uneven/textured surfaces, or highly porous surfaces. Do not use double-sided tape to attach any part of the device to a ceiling or surface greater than 90 degrees relative to the fioor, as the device will eventually fall down-creating a safety hazard and risk of damage to the device. Optional secure screw mounting solutions for these use cases are available, sometimes through added accessories offered for purchase separately, Your warranty DOES NOT COVER damage caused by falling devices. The flexible cable and power supply cannot be replaced by another third-party product. if the cable is damaged, the entire controller and power supply should only be replaced with original equipment manufactured by Nanoleaf@, Using any non-approved replacement component ill void the warranty and may present a serious safety hazard. Nanoleaf@ light panels are primarily intended for decorative use, with a tunable white output function that can dim.

CE INFORMATION
The external flexible cable or cord of this luminaire cannot be replaced; if the cord is damaged, the luminaire shall be destroyd. The light source contained in this luminaire shall only be replaced by the manufacturer or this service agent or a similar qualified person. NanoGrid Limited (Nanoleaf) hereby declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 2014/30/EU. The declaration of conformity is available at go.nanoleaf.me/eudoc.

WARRANTY INFORMATION

This product is covered by a limited warranty from Nanoleaf®: a two-year complimentary replacement of defective hardware. For full details visit: go.nanoleaf.me/warranty. Disposal of your old product: Your product is designed and manufactured with high-quality materials and components, which can be recycled and reused. When this crossed- out wheelie bin symbol is attached to a product, it means that the product is covered by European Directive 2012/19/EU. Please find out about your local collection system for electrical and electronic products. Please act according to your local rules and do not dispose of your old products with your normal household waste. The correct disposal of your old product will help to prevent potential negative consequences for the environment and human health

  • Nanoleat Canada
  • 400-80 Front Street East

  • Toronto, ON
  • MSA 1E1, Canada
  • Nanoleaf Europe SAs
  • 11 Rue de Lourmel
  • 75015 Paris
  • France
  • Manufacturer
  • NanoGrid Limited
  • 1301-483A Castle Peak Road

  • Kowloon, Hong Kong
  • Models:
  • NL52-E-O001HB-3PK
  • FCC ID: 2AEWY-NL42
  • IC: 20489-NL42

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

nanoleaf User Manuals

Related Manuals