nanoleaf Shapes Triangles Expansion Pack- 3 Pack User Guide

June 4, 2024
nanoleaf

nanoleaf Shapes Triangles Expansion Pack- 3 Pack User Guide

nanoleaf.me/myshapes

Important Installation Tips

nanoleaf.me/myshapes.

REQUIRES A NANOLEAF a> SHAPES SMARTER KIT / STARTER KIT

WARNINGS & CAUTIONS Please read this safety 1nformat1on carefully and keep this document for future reference. Help articles and customer support 1s always available at https://helpdesk.nanoleaf.me. This Nanoleaf R) product 1s not designed. certified, nor intended for use in: Enclosed locations that limit the flow of air and/or trap heat which contributes to an environment temperature over 40 degrees Celsius. Emergency exits, emergency lighting, or other use cases involving critical systems for human safety. In conjunction with 3rd party devices that ore not approved by Nonoleof ii for use with Nanoleof · products. Locations or use cases where there 1s o risk of electric shock. Outdoor areas, regardless of weather conditions. Wet or damp conditions. As o floor covering or floor tiling. Excessively hot environments that ore consistently above 40 degrees Celsius for extended periods of time (for example: near ovens, space heaters. clothing dryers). Regions or countries other than that in which the product was intended for and certified for sole 1n. Use In excessively humid areas When using this Nanoleaf..!I product. Do not open or disassemble the device, as this will void the warranty and make the product unsafe for use. While connected to the electrical supply of the building, do not place any metallic or conductive obiects near any exposed metal contacts on any component Do not allow small children to operate this device without adult supervision This device contains small parts that may be a choking hazard to small children Loose or dangling cords may cause an entanglement hazard to small children Do not leave cords dangling or loose on the floor to help prevent accidents from tripping. Do not clean the device with liquid or sprays when it is connected to power Cleon the panels with o soft dry cloth, and do not use harsh cleaning agents. Do not bend or flex the panels with the connector still attached, as this will cause breakage Do not attach the panels together with any connector or device other than original equipment manufactured by Nonpolio · . Do not puncture any port of the device with sharp objects, as this will cause the device to cease working as designed and may present o safety hazard. If applicable, do not use double-sided tape to attach any port of the device too ceiling or surface greater than 90 degrees relative to the floor as the device will eventually foll down-creating o safety hazard and risk of damage to the device. Optional secure mounting solutions for these use cases ore ova1loble, sometimes through added accessories offered for purchase separately. Your warranty DOES NOT COVER damage caused by foiling devices. Do not step on onyx port of the device, as this will cause breakage. Do not submerge ony port of the device in water, or expose any port of the device to water If adhesive tape is a component of this product, please note that it is not designed to be used with unpainted back wall, wallpaper, uneven/textured surfaces, or highly porous surfaces. For installation to these types of surfaces, use the optional secure mounting function (accessories violable separately). The flexible coble and power supply cannot be replaced by another third party product If the coble is damaged, the entire controller and power supply should only be replaced with orig1nol equipment manufactured by Nonoleof “!.. Using any non-approved replacement component will void the warranty and may present o serious safety hazard. Nonoleof1· light panels ore primarily intended tor decorative use, with RGBW output function that con dim,

CE INFORMATION The external flexible coble or cord of this luminaire cannot be replaced; if the cord is damaged, the luminaire shall be destroyed. The light source contained in this luminaire shall only be replaced by the manufacturer or this service agent or a similar qualified person. Nano Grid Limited (Nanoleaf) hereby declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 2014/30/EU. The declaration of conformity is available at www.nanoleaf.me/eudoc/.

WARRANTY INFORMATION This product is covered by a limited warranty from Nano leaf(· 1· a two-year complimentary replacement of defective hardware. For full details visit: nanoleaf me/warranty.
Disposal of your old product: Your product is designed and manufactured with high-quality materials and components, which can be recycled and reused. When this crossed-out wheelie bin symbol is attached to a product, It means that the product is covered by European Directive 2012/19/EU. Please find out about your local collection system for electrical and electronic products. Please act according to your local rules and do not dispose of your old products with your normal household waste. The correct disposal of your old product will help to prevent potential negative consequences for the environment and human health.

Nanoleaf Canada

400 – 100 Front Street Eost

Toronto, ON
MSA 1E1. Conoda

Nanoleaf Europe SAS
11 Rue de Lourmel
7S01S Paris
Fronce

Manufacture ,.,
NanoGnd Limited • 1301-483A Castle Peo1 Rood,
Kowloon, Hong Kong

Modela:
NL47 ·00OlTW-3PK.
FCC ID: 2AEWY-NL42
IC : 201.89-NL42

Still Need Help?
nanoleaf.me/support

Twitter
Instagram
Pinterest
YouTube
Facebook

https://nanoleaf.me/

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

nanoleaf User Manuals

Related Manuals