CARRY CDA3-20 Gigabit Cable Modem User Guide
- September 20, 2024
- Carry
Table of Contents
CARRY CDA3-20 Gigabit Cable Modem
Specifications
- Model: HITRON CDA3-20
- Includes: Quick Start Guide, Ethernet Cable (RJ-45), Power Adapter
Product Usage Instructions
Check the Box Contents:
Look in the box and ensure you have the following:
- Quick Start Guide
- Modem: HITRON CDA3-20
Connect the Modem to the Cable Outlet:
Connect the coaxial cable from the modem to the cable outlet as indicated
below.
- Modem: HITRON CDA3-20
- Ethernet Cable (RJ-45)
- Power Adapter
- Coaxial Cable (Optional)
To download the full manual of Hitron CDA3-20, please visit: Hitron CDA3-20
Manual
If you need help to set up the equipment, please contact us at
647-560-4448">647-560-4448
and go to Line 2 for Technical Support.
Connect the Power Adapter to the Modem:
Connect the power adapter directly from the wall outlet to the modem as
indicated below.
REMINDER: Connect your own router or computer here.
CHECKTHEBOXCONTENTS
Look in the box and make sure you have the following:
To download the full manual of Hitron CDA3-20, please visit:
https://www.carrytel.ca/download/hitroncda3-20.pdf
If you need help to set up the equipment, please contact us at
647-560-4448 and go to Line 2 for
Technical Support
CONNECT
CONNECT THE MODEM TO THE CABLE OUTLET
Connect the coaxial cable from the modem to the cable outlet as indicated
below.
CONNECT THE POWER ADAPTER TO THE MODEM
Connect the power adapter DIRECTLY from the wall outlet to the modem as
indicated below.
Frequently Asked Questions
- Q: How do I reset the modem to factory settings?
- A: To reset the modem to factory settings, locate the reset button on the modem and hold it down for at least 10 seconds until the lights on the modem flash.
- Q: Can I use this modem with any internet service provider?
- A: The HITRON CDA3-20 modem is compatible with most major internet service providers. However, it is recommended to check with your ISP for specific compatibility requirements.