nanoleaf NLSS-OOOlLS-lM Essentials Smart Lighting Strip Light Extension Kit Instructions

nanoleaf NLSS-OOOlLS-lM Essentials Smart Lighting Strip Light Extension

WARNINGS & CAUTIONS
Help articles and customer support Is always available at https://helpdesk.nonoleof.me/. This Nanoleaf product is not designed, certified, nor intended for use in: enclosed locations that limit the flow of air and/ or trap heat which contributes to on environment temperature over 40 degrees Celsius; emergency exits, emergency lighting, or other use cases involving critical systems for human safety; in conjunction with 3rd party devices that ore not approved by Nanoleaf for use with Nanoleaf products locations or use cases where there is o risk of electric shock; outdoor areas, regardless of weather conditions; wet or damp conditions; excessively humid areas; regions or countries other than that 1n which the product was Intended for and certified for sole In. Risk of electric shock  do not use where directly exposed to water.

When using this Nonoleof product

Always Install the luminalre In accordance with your local building code and consult a qualified electrician If necessary. Be careful not to damage or cut the power wire insulation during Installation.

• Keep all cords away from sharp edges.
• Do not open or disassemble the device, so this will void the warranty and make the product unsafe for use.
• Do not connect the device to the electrical supply while 1t Is In the pocking or wound onto o reel.
• While connected to the electrical supply of the building, do not place any metallic or conductive objects near any exposed metal contacts on any. Component. Unplug the power supply unit from the power source before moving the devotee.
• Do not allow small children to operate this device without doubt supervision.
• This device contains small ports that may be a choking hazard to small children.
• Loose or dangling cords may cause on entanglement hoard to small children.
• Do not leave cords dangling or loose on the floor to help prevent accidents from tripping.
• Do not step on any port of the device, as this will cause breakage.
• Do not submerge any port of the device in water, or expose on port of the device to water.
• Please note the adhesive tape provided with this product ls not designed to be used with unpainted brick wall. wallpaper, uneven/textured surfaces, or highly porous surfaces.
• Do not connect this device to another manufacturer’s product.
• The flexible coble and power supply cannot be replaced by another third party product.
• If the cable is damaged, the entire controller and power supply should only be replaced with  equipment manufactured by Nanoleof.
• Using any non-approved replacement component will void the warranty and may present a serious safety hazard.
• It’s often unwise to stick your fingers or other ports of your person or conductive things connected to your person.
• In dark places that you can’t see inside.
• Always practice safe play with battery operated and plug in devices.
• Nanoleaf Essentials 1s lighting product by Nonoleof Ltd that pairs to o Google Account on uses Google services to connect to the internet.

For setup and full feature access Including remote control, mobile

alerts, and software updates

Nonoleof Essentials requires o compatible assistive device full list available at g.co/nest/assistive device and o working internet connection over WiFl, the free Google Home pop, and on active Google Account Minimum requirements. Availabillity and performance of certain features ore service device-, and network-dependent and may not be available in all areas. All features, functionality, and product specifications ore sub1ect to change without notice or obhgat1on. Voice control with the Google Assistant requires o compatible smart device. Google and related marks and logos are trademarks of Google UC.

CLEANING AND MAINTENANCE

Do not cleon the device with liquid or sprays when It is connected to power. Clean with a soft dry cloth, and do not use harsh cleaning agents. Manage In accordance with disposal lows in your area.

RADIO FREQUENCY RANGE

Bluetooth hereby declares that this device is In compliance with the essential requirements and other relevant prov1s1ons of Directive 2014/53/EU. The declorotJon of conformity is available ot nonoleaf.me

WARRANTY INFORMATION
This p1oduct is covered by a limited warranty from Nanoleof•:. o two-year complimentary replacement of defective hardware. For full details visit: nonoleaf.me/warranty 

Disposal of your old product
Your product is designed and manufactured with high quality materials and components. which con be recycled and reused. When this crossed out wheelie bin symbol is attached to o product, tt means that the product is covered by European Directive 2012/19/EU. Please find out about your local collection system for electrical and electronic products. Please act according to your local rules and do not dispose of your old products with your normal household waste Tine correct disposal of your old product will help to prevent potential negative consequences for the environment and human health.

This device complies with Part of the FCC Rules. Operation Is subjects to the following two conditions

• This device may not cause harmful Interference.
• This d8Y!Ce must accept any interference received, Including that may cause undesired operation.
• Rated Power: 11W
• Standby Power: 0.3W
• Rati119 Input: I00-240V S0/60Hz
• Luminous Flux: l000lm +/-10\ ill2700-6SOOK
• Color Temperature: 2700-6SOOK, RGBCW
• Dimming Range: 1\100%
• Resolution 01%
• Dlmml119: Controller, voice or app
• Recommended max  per controller: 10M

References

• helpdesk.nonoleaf.me/
• Nanoleaf® Official Site | Smart Home LED Lighting Products
• Nanoleaf® Official Site | Smart Home LED Lighting Products

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>