nanoleaf NL48 S00lTW-SPK Shapes Mini Triangles Expansion Pack User Guide
- June 4, 2024
- nanoleaf
Table of Contents
- nanoleaf NL48 S00lTW-SPK Shapes Mini Triangles Expansion Pack
- Symbols
- How we fix it?
- Important Installation Tips
- SETUP
- How we start it?
- REQUIRES A NANOLEAF® SHAPES SMARTER KIT / STARTER KIT
- CE INFORMATION
- 1301-483A Castle Peak Rood,
- 5 Panels
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
nanoleaf NL48 S00lTW-SPK Shapes Mini Triangles Expansion Pack
Symbols
Light Panels Mounting Plates Mounting Tape Linkers
Downloads from
How we fix it?
Important Installation Tips
Make sure you have enough PSUs for your layout.
NOTE
Each standard PSU supports up to 42W and each Controller supports up to 500
panels. Use our PSU calculator at nanoleaf.me/my shapes. Before mounting yo r
panels, clean your surface to be free of dust moisture and oil. When mounting,
apply strong pressure to the center of the panel for 30 seconds. The
Controller end Power Supply can be connected to any panel in your setup. Tape
is NOT suitable for textured, porous, popcorn and ceiling surfaces ie.
wallpaper or brick walls.
SETUP
How we start it?
REQUIRES A NANOLEAF® SHAPES SMARTER KIT / STARTER KIT
WARNINGS & CAUTIONS
Help articles and customer support is always available of me. This Nanoleaf
Ci> product is not designed, certified, nor intended for use in- Enclosed
locations that limit the flow of air and/ or trap heat which contributes to on
environment temperature over 40 degrees Celsius. Emergency exits, emergency
lighting, or other use cases involving critical systems for human safety. In
conjunction with 3rd party devices that are not approved by Nonoleofi for use
with NonoleafR products. Locations or use coses where there 1s a risk of
electric shock. Outdoor areas, regardless of weather conditions. Wet or damp
conditions. As a floor covering or floor tiling. Excessively hot environments
that ore consistently above 40 degrees Celsius for extended periods of time
(for example: near ovens, space heaters, clothing dryers. Regions or countries
other than that in which the product was intended for and certified for sale
in. Use 1n excessively humid areas. When using this Nanoleof product: Do not
open or disassemble the device, as this will void the warranty and make the
product unsafe for use. While connected to the electrical supply of the
building, do not place any metallic or conductive objects near any exposed
metal contacts on any component. Do not allow small children to operate this
device without adult supervision. This device contains small parts that may be
a choking hazard to small children. Loose or dangling cords may cause on
entanglement hazard to small children. Do not leave cords dangling or loose on
the floor to help prevent accidents from tripping. Do not clean the device
with liquid or sprays when it is connected to power. Clean the panels with o
soft dry cloth, and do not use harsh
cleaning agents. Do not bend or flex the panels with the connector still
attached, as this will cause breakage. Do not attach the panels together with
any connector or device other than original equipment manufactured by
Nonoleaf. Do not puncture any port of the device with sharp objects, as this
will cause the device to cease working as designed and may present a safety
hazard. If applicable, do not use double-sided tape to attach any port of the
device to o ceiling or surface greater than 90 degrees relative to the floor,
as the device will eventually fall down-creating a safety hazard and risk of
damage to the device. Optional secure mounting solutions for these use cases
are available, sometimes through added accessories offered for purchase
separately. Your warranty DOES NOT COVER damage caused by falling devices. Do
not step on any part of the device, as this will cause breakage. Do not
submerge any port of the device in water. or expose any port of the device to
water. If adhesive tape is a component of this product, please note that it is
not designed to be used with unprinted brick wall, wallpaper, uneven/ textured
surfaces, or highly porous surfaces. For installation to these types of
surfaces, use the optional secure mounting function (accessories available
separately. The flexible cable and power supply cannot be replaced by another
third party product. If the cable 1s damaged, the entire controller and power
supply should only be replaced with original equipment manufactured by
Nonoleaf Using any non-approved replacement component will void the warranty
and may present a serious safety hazard. Nonoleof light panels ore primarily
intended for decorative use with RGBW output function that con dim.
CE INFORMATION
The external flexible coble or cord of this luminaire cannot be replaced; if the cord 1s damaged, the lum1noire shall be destroyed. The light source contained 1n this luminoire shall only be replaced by the manufacturer or this service agent or a similar qualified person. NonoGrid Limited (Nonoleof) hereby declares that this device 1s in compliance with the essential requirements and other relevant provisions of Directive 2014 30/ EU. The declaration of conformity is available at www.nonoleof.me/ eudoc/
INFORMATION
This product is covered by a limited warranty from Nonoleof two year
complimentary replacement of defective hardware. For full details visit:
nonoleof.me/ warranty.
Nanoleof Canada
400 100 Front Street East
Toronto, ON
MSA lEl. Conado
Nanoleaf Europe SAS
10 Rue du Coptane Ferber
92130 lssyles Mouhneoux
France
Manufacturer
NonoGrid Limited
1301-483A Castle Peak Rood,
Kowloon, Hong Kong
5 Panels
Need More Ideas?
nanoleaf.me/inspiration
References
- Nanoleaf® Official Site | Smart Home LED Lighting Products
- Nanoleaf® Official Site | Smart Home LED Lighting Products
- Integration Hub | Nanoleaf » USA » Consumer IoT & LED Smart Lighting Products
- User Manual Shapes | Nanoleaf® (United States)
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>