nanoleaf B08DX91BB5 Shapes Hexagons Expansion Pack User Guide
- June 4, 2024
- nanoleaf
Table of Contents
Nanoleaf Shapes
Hexagons I Expansion Pack
Quick Start Guide
User Manual
nanoleaf.me/myshapes
Important Installation Tips
Make sure you have enough PSUs for your layout. NOTE: Each standard PSU
supports up to 42W and each Controller supports up to 500 panels. Use our PSU
the calculator at nanoleaf.me/myshapes.
Before mounting your panels,
clean your surface to be free of dust, moisture, and oil
To mount, apply strong pressure in a circular motion to the center of
the panel for 30 seconds.| The Controller and Power Supply can be connected to
any panel 1n your setup.| Tope is NOT suitable for textured, porous. popcorn
and ceiling surfaces (le wallpaper or brick walls).
https://nanoleaf.me/app/layout-assistant?md=NL42
REQUIRES A NANOLEAF® SHAPES SMARTER KIT / STARTER KIT
WARNINGS & CAUTIONS Please read this safety information carefully and
keep this document for future reference. Help articles and customer support is
always available at https://helpdesk.nonoleaf.me. This Nonoleaf® product 1s
is not designed, certified, nor intended for use in Enclosed locations that
limit the flow of air and/or trap heat which contributes to an environment
temperature over 40 degrees Celsius. Emergency exits, emergency lighting, or
other use cases involving critical systems for human safety In conjunction
with 3rd party devices that are not approved by Nonoleof® for use with
Nonoleof® products. Locations or use cases where there is a risk of electric
shock. Outdoor areas, regardless of weather conditions. Wet or damp
conditions. As o floor covering or floor tiling. Excessively hot environments
that are consistently above 40 degrees Celsius for extended periods of time
(for example· near ovens, space heaters, and clo+hing dryers). Regions or
countries other than that in which the product was intended for and certified
for sole 1n. Use in excessively humid areas. When using this Nanoleaf®·
product: Do not open or disassemble the device, as this will void the warranty
and make the product unsafe for use. While connected to the electrical supply
of the building do not place any metallic or conductive objects near any
exposed metal contacts on any component. Do not allow small children to
operate this device without adult supervision. This device contains small
parts that may be o choking hazard to small children. Loose or dangling cords
may cause an entanglement hazard to small children. Do not leave cords
dangling or loose on the floor to help prevent accidents from tripping Do not
clean the device with liquid or sprays when it is connected to power. Clean
the panels with a soft dry cloth. and do not use harsh cleaning agents. Do not
bend or flex the panels with the connector still attached, as this will cause
breakage. Do not attach the panels together with any connector or device other
than the original equipment
manufactured by Nonoleaf® Do not puncture any port of the device with sharp
objects, as this will cause the device to cease working as designed and may
present a safety hazard If opphcoble, do not use double-sided tape to attach
any part of the device to a ceiling or surface greater than 90 degrees
relative to the floor. as the device will eventually fall down-creating a
safety hazard and risk of damage to the device Optional secure mounting
solutions for these use cases are available. sometimes through added
accessories offered for purchase separately. Your warranty DOES NOT COVER
damage caused by falling devices. Do not step on any port of the device, as
this will cause breakage. Do not submerge any part of the device in water. or
expose any port of the device to water If the adhesive tape is a component of
this product, please note that 1t 1s are not designed to be used with
unpainted brick walls, wallpaper, uneven/textured surfaces., or highly porous
surfaces. for installation to these types of surfaces, use the optional secure
mounting function (accessories available separately). The flexible cable and
power supply cannot be replaced by another third-party product. If cable 1s is
damaged, the entire
controller and power supply should only be replaced with original equipment
manufactured by Nonoleofi>. Using any non-approved replacement component wJII
voids the warranty and may present a serious safety hazard Nanoleof® light
panels are primarily intended for decorative use, with RGBW output function
that can dim.
CE INFORMATION The external flexible cable or cord of this luminaire
cannot be replaced; 1f the cord 1s damaged, the luminaire shall be destroyed.
The fight source contained in this luminaire shall only be replaced by the
manufacturer or this service agent or o similar quoted person. NanoGrid
Limited (Nonoleaf) hereby declares that this device 1s 1n compliance with the
essential requirements and other relevant provisions of Directive 2014 30/ EU.
The declaration of conformity is available at
www.nanoleaf.me/eudoc/
WARRANTY INFORMATION This product is covered by a limited warranty from Nanoleaf, ll.J: a two-year complimentary replacement of defective hardware. For full details visit: nonoleaf.me/warranty.
**** Disposal of your old product Your product ,s designed and manufactured with high-quality materials and components, which can be recycled and reused When this crossed-out wheelie bin symbol is attached to a product, it means that the product is covered by European Directive 2012/ 19 EU. Please find out about your local collection system for electrical and electronic products. Please act according to your local rules and do not dispose of your old products with your normal household waste. The correct disposal of your old product will help to prevent potential negative consequences for the environment and human health.
Nanoleaf Canada
400 – 100 Front Street East
Toronto, ON
MSA lEl. Canada
Nanoleaf Europe SAS
11 Rue de Lourme,
75015 Paris
Fronce
Manufacturer
NonoGrid Limited
l301-483A Castle Peak Rood,
Kowloon. Hong Kong
Models:
NL42-0001HX-3PK
FCC ID: 2AEWY-NL42
IC: 20489-NL42
Still Need Help?
nanoleaf.me/support
Documents / Resources
|
nanoleaf B08DX91BB5 Shapes Hexagons Expansion
Pack
[pdf] User Guide
B08DX91BB5 Shapes Hexagons Expansion Pack, B08DX91BB5, Shapes Hexagons
Expansion Pack, Expansion Pack, Pack
---|---
References
- Nanoleaf® Official Site | Smart Home LED Lighting Products
- Nanoleaf® Official Site | Smart Home LED Lighting Products
- Integration Hub | Nanoleaf » USA » Consumer IoT & LED Smart Lighting Products
- User Manual Shapes | Nanoleaf® (United States)
- nonoleaf.me/
- Nanoleaf Official Site | Smart Home LED Lighting Products
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>