nanoleaf 374NL42HX7 Shapes Hexagon Smarter Kit User Guide

: June 4, 2024
: nanoleaf

Table of Contents

nanoleaf 374NL42HX7 Shapes Hexagon Smarter Kit
IN THE BOX
Important lnstallat·on Tips
WARNINGS & CAUTIONS
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

nanoleaf 374NL42HX7 Shapes Hexagon Smarter Kit

IN THE BOX

nanoleaf-374NL42HX7-Shapes-Hexagon-Smarter-Kit-fig-1

Important lnstallat·on Tips

nanoleaf-374NL42HX7-Shapes-Hexagon-Smarter-
Kit-fig-2

Ma e sure you have enough PSUs for your lcyout. NOTE: Each s android PSU support s up o 42W and each Controller supports up o 500 panels. Use our PSU colcula or at Nanoleaf.me/shapes.
Before mounting your panels, clean your surface to be free of dust. moisure o,nd oil
To mount, apply strong pressu e in a circular mo ion o the , center of the panel or 30 seconds.
The Controller and Power Supply con be connected to any panel in your setup.
Tope is NOT suitable for ex ured, porous, popcorn, and ceding surfaces (ie. wallpaper or brick walls).

nanoleaf-374NL42HX7-Shapes-Hexagon-Smarter-Kit-fig-4

WARNINGS & CAUTIONS

Please read this safety information carefully and keep this document for future reference. Help articles and customer support Is always available at
http://helpdesk.nonoleof.me This Nonoleafi; product Is not designed, or certified. nor intended for use in• enclosed locations that limit the flow of air and/or trap heat which contributes to an environment temperature over 40 degrees Celsius; emergency exits, emergency lighting, or other use coses involving critical systems for human safety: in conjunction with 3rd party devices that are not approved by Nonoleof• for use with Nonoleof • products; locations or use coses where there 1s a risk of electric shock; outdoor areas, regardless of weather conditions; wet or damp conditions, os o floor covering or floor tiling; excessively hot environments that are consistently above 40 degrees Celsius for extended periods of time (for example near ovens, space heaters, clothing dryers), excessively humid areas; regions or countries other than thot in which the product was intended for and certified for sole in When using this Nanoleofr• product, do not open or disassemble the device, as this will void the warranty and make the product unsafe for use.

While connected to the electrical supply of the building, line voltages will be present 1n the power supply, panels, linkers, so do not place any metallic or conductive objects near any exposed metal contacts on any component. Unplug the power supply unit from the power source before dismounting light panels. Do not allow small children to operate this device without adult supervision. This device contains small ports that may be a choking hazard to small children. Loose or dangling cords may cause an entanglement hazard to small children. Do not leave cords dangling or loose on the floor to help prevent accidents from tripping. Do not clean the device with liquid or sprays when it Is connected to power. Cleon the panels with o soft dry cloth, and do not use harsh cleaning agents. Do not step on any port of the device as this will cause breakage. Do not submerge any port of the device in water, or expose any port of the device to water. Do not bend or flex the panels with the connector still attached, as this will cause breakage. Do not attach the panels together with any connector or device other than original equipment manufactured by Nonoleof-• Do not puncture any port of the device with sharp objects, as this will cause the device to cease working as designed and may present a safety hazard.

If adhesive tape Is a component of this product, please note that It Is not designed to be used with brick wall, or wallpaper. uneven/textured surfaces, or highly porous surfaces. Do not use double-sided tape to attach any part of the device to a ce1hng or surface greater than 90 degrees relative to the floor, as the device will eventually fall down-creating o safety hazard and risk of damage to the device. Optional secure screw mounting solutions for these use coses ore available, sometimes through added accessories offered for purchase separately. Your warranty DOES NOT COVER damage caused by falling devices. The flexible cable and power supply cannot be replaced by another third party product. If the coble Is damaged, the entire controller and power supply should only be replaced with original equipment manufactured by Nonoleof®. Using any non-approved replacement component will void the warranty and may present a serious safety hazard. Nonoleaf•• light panels ore primarily intended for decorative use. with RGBW output function that con dim.

WI-Fl/RF This equipment hos been tested and found to comply with the limits of o Class B digital device, pursuant to part 15 of the FCC Rules and the Conod1on ICES-003 Class B speclficot1ons. These limits ore designed to provide reasonable protection against harmful interference In a res1dent1al installation. This equipment generates, uses and can radiate radio frequency energy and, 1f not installed and used in accordance with the 1nstructIon;;, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in o particular installation. If this equipment does cause harmful interference to radio or television reception, which con be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving ontenno. Increase the separation between the equipment and receiver. Connect the equipment mto on outlet on o circuit different from that to which the receiver is connected. Consult the dealer or on experienced radio/TV techn1c,an or v,sit www.nonoleof.me/support.

FREQUENCY RANGE
2.4GHz Wi-F1: 2412-2462 MHz, Mox RF e.1.r.p power< 20 dBm 2.4GHz RodiO’. 2402-2480 MHz, Mox RF e.i.r.p power<lO dBm NFC· 13.56MHz. Mox RF e.1.r.p power O dBm

CE INFORMATION
The external flexible coble or cord of this lumina1re cannot be replaced; if the cord is damaged, the luminoire shall be destroyed The light source contained in this lum1noire shall only be replaced by the manufacturer or this service agent or a similar qualified person. NanoGnd Limited (Nonoleaf) hereby declares that this device is in compliance with the essential requirements and other relevant prov1s1ons of Directive 2014/53/EU. The declaration of conformity 1s available ot www.nonoleaf.me/eudoc/.

WARRANTY INFORMATION
This product Is covered by a limited warranty from Nanoleof!>: a two-year complimentary replacement of defective hardware. For full details visit: nanoleofme/warranty.