MINKA LAVERY 3673-111 Vortic Flow 7-Inch W 3-Light Dark Bronze with Mosaic Gold Interior Industrial Wall Sconce Instruction Manual

June 3, 2024
MINKA LAVERY

MINKA LAVERY 3673-111 Vortic Flow 7-Inch W 3-Light Dark Bronze with

Mosaic Gold Interior Industrial Wall Sconce

MINKA LAVERY 3673-111 Vortic Flow 7-Inch W 3-Light Dark Bronze with Mosaic
Gold Interior-Industrial-Wall-Sconce-PRODUCT-IMG

INSTRUCTION

HANGING THE FIXTURE (Fig. 1)MINKA LAVERY 3673-111 Vortic Flow 7-Inch W
3-Light Dark Bronze with Mosaic Gold Interior-Industrial-Wall-Sconce-FIG-
\(1\)

  1. Carefully remove the fixture from the carton and check that all parts are included as shown in the illustration.

  2. Shut off power at the circuit breaker and remove old fixture including the mounting hardware.

  3. Removed the mounting bracket (C) from the back plate (B) by unscrewing the mounting screw (A)

  4. The mounting bracket (C) contains several pairs of threaded holes, find the pair of holes that match the spacing of the holes in your Junction box(E). Attach the mounting bracket (C) to the Junction Box(E) using the two mounting screws (G)( size: 8/32*25mm).
    Tighten the screws (G) securely with screwdriver.
    The side of the mounting plate marked “GND” must face out.
    CONNECTING THE WIRES (Fig. 2)

  5. At this point, connect the electrical wires as shown in (Fig.2), Make sure that all wire connections are secured. If your outlet has a ground wire (green or bare copper), connect the fixtures Ground Wire to it. Otherwise, connect the fixture Ground Wire directly to the mounting bracket using the Green Screw provided.

  6. Secure the back plate(B) to the mounting bracket(C) with the mounting screw (A)..
    INSTALL LIGHT BULB (Fig. 1)
    MIN 75℃ SUPPLY CONDUCTORS

  7. Install light bulb (F) (Excluded) in accordance with the fixture’s specifications. (DO NOT EXCEED THE MAXIMUM WATTAGE RATING!!) (NE PAS DEPASSER LA PUISSANCE NOMINALE MAXIMALE!)

  8. Secure the Lamp shade (H) to the back plate(B) with the ball screw(I)
    FINISH THE INSTALLATION (Fig. 1)

  9. Your installation is complete now. Return power to the junction box and test the fixture. Note: Illustration (Fig.1) on this manual is for installation purposes only. It may or may not be identical to the fixture purchased.

Item# 3673-111( New. 2018/01/08)

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

MINKA LAVERY User Manuals

Related Manuals