halsa Baby All in One Wellness Monitor User Guide
- June 28, 2024
- halsa
Table of Contents
halsa Baby All in One Wellness Monitor
“`html
Product Specifications:
- Heart Rate Monitoring
- Oxygen Levels Monitoring
- Skin Temperature Variation Tracking
- Sleep Patterns Analysis
- Two Way Voice Communication
- Room Humidity Monitoring
- Nightlight Feature
- Charging Dock included
- Sound Machine & Lullabies
- Sound & LED Light Alarm System
- Voice Assistance
Product Usage Instructions:
Easy To Use Touch Controls:
-
QUICK TOUCH: Each tap rotates through presets.
Touch and Hold to turn off preset, light, or sound. Mute alarms
with a single tap. -
VOLUME: Press button to cycle through volume
levels – low, medium, high. -
PLAY/PAUSE: Press to play or pause preset
audio. Touch and Hold to skip to the next preset audio. -
LIGHT: Press to turn on or off preset
nightlight.
Warnings / Important Safety Information:
-
SAFETY: For indoor use only. Keep away from
water. Do not expose to moisture. Do not disassemble the
product. -
POWER CORD PROTECTION: Always ensure the
protective covering is intact. Discontinue use if damaged. -
VENTILATION: Do not block ventilation
openings. Keep in a clean, dust-free environment. -
HEAT: Keep away from heat sources and direct
sunlight. -
Temperature & Humidity Ranges: Operating:
0C to 40C, humidity 10% to 95%. Storage: (-10) C to 45 C, humidity
5% to 90%. -
STRANGULATION HAZARD: Keep cords out of reach
of children. Adult assembly required.
Frequently Asked Questions (FAQ):
Q: What should I do if redness occurs due to the ankle
band?
A: Red areas may be due to moisture or tightness. Try
alternating between ankles. If redness persists, discontinue use
and consult a physician.
Q: How can I mute triggered alarms?
A: Simply tap the Touch button once to mute a triggered
alarm.
Q: Can the product be used near water?
A: No, the product is for indoor use only and should not be used
near water sources to avoid risks of electrical shock.
“`
Reference Guide Hälsa Baby All-In-One Wellness Monitor
Hälsa Baby Features
SMART SENSOR & ANKLE BAND Heart Rate Oxygen Levels Skin Temperature Variation,
Sleep Patterns
HUB Nightlight Two Way Voice Communication Room Humidity Charging Dock
Travel Mode Washable Bands 3 Sizes 15+ Hours Battery Life
Room Temperature Sound Machine & Lullabies Sound & LED Light Alarm System
Voice Assistance
Smart Sensor & Ankle Band The Hälsa Baby All-In-One Wellness Monitor, uses a
smart sensor to track your baby’s
readings
INSTRUCTIONS The Smart Sensor and Ankle Band can be worn on either the right
or left ankle. For proper placement, position the smart sensor, with the logo
side out, on the outside of the ankle just above the ankle bone. BAND FIT
Place the ankle band with smart sensor on the fleshy part of the skin above
the ankle bone. The ankle band should fit snug enough that it doesn’t slide or
rotate around the baby`s ankle but not too tight that it is uncomfortable. For
the smart sensor to function properly and provide the best readings for
features like heart rate, oxygen saturation and skin temperature variation,
the silver metal contact point on the inside of the smart sensor towards the
bottom of the ankle band must make direct skin contact.
Red areas can sometimes occur due to moisture, and or having the ankle band
too tight. This can usually be avoided by alternating between the left and
right ankles. If redness continues to occur, please discontinue use and
consult your physician before using again if your baby is experiencing an
allergic reaction to the infrared light. Please contact customer service.
Hälsa Baby Skin Temperature Readings The Smart Sensor, will estimate your
baby’s skin temperature to measure any variation from your baby’s personal
baseline. Your baby’s personal baseline for skin temperature will be
determined within the first 2 minutes of each usage session. If the skin
temperature (Optimal/Non-Optimal) does not appear on the dashboard within the
Hälsa app, within 15 minutes, readjust the placement of the smart sensor and
ankle band to confirm proper placement. Once the personal baseline is
established, you’ll be able to see your baby’s skin temperature variation
meaning whether your baby skin temperature is higher or lower than the
personal baseline as your baby
continues to wear the smart sensor in ankle band the Hälsa app will use that
additional data to adjust the base landscape temperature as needed. Please
note, proper placement of the smart sensor and ankle band is essential for the
best readings while it is normal for a skin temperature to have some variation
throughout the day and night you should check your babies core temperature
using an FDA approved thermometer if there continues to be consistent
variation in skin temperature. Hub The Hub manages the nursery environment
through temperature and humidity tracking, two-way communication and
customizable nightlight, lullabies, and sound features. INSTRUCTIONS Use the
buttons on the back of the Hub, to adjust the volume, play/pause music and to
turn the nightlight on and off. More functions and settings for these features
are also available within the Hälsa app and FAQs.
On the top of the Hub, the upraised circle on the left is the Quick Touch
“button” which controls the lights and sounds preset within the Hälsa app. A
single tap on the Touch “button” can mute a triggered alarm. The silver ring
on the right acts as a charging dock for the Smart Sensor. To charge, simply
place the smart sensor, logo side down, so it is touching the charging ring.
When charging starts, a green LED light from the Hub will blink, and in a
setup completed device, the user can also see a battery icon displayed on the
Hälsa App.
Easy To Use Touch Controls
QUICK TOUCH Each tap will rotate through the presets. Touch and Hold: Turn off
preset, light or sound.
** A single tap on the Touch button can also be used to mute a triggered
alarm.
Note: The User Can Set Quick Touch Presets Via the Hälsa App.
VOLUME Each press of the button will rotate through the volume levels preset –
low, medium and high.
PLAY/ PAUSE Each Press of the button will rotate through the presets 1st
Press: Play preset audio 2nd Press: Pause preset audio Touch and Hold: Skip to
the next preset audio
LIGHT Each Press of the button will rotate through the presets 1st Press: Turn
on preset nightlight 2nd Press: Turn off preset nightlight
Understanding Hälsa Baby Alarms & Notifications
The Hälsa app allows you to set customize ranges for vital signs and see room
environment conditions based upon your own baby’s needs, and you will be
alerted when something is out of range.
HOW THEY WORK Hälsa has two different alert types: 1. Alarm sound and red LED
lights emitted from the Hub. 2. Push notifications sent to your mobile phone
Via Hälsa App.
The Hälsa app will alert you with a push notification to your mobile phone if
any readings fall outside of the customized ranges. In order to view the
alerts within the push notifications, you must have text previews enabled on
your mobile device.
The Hälsa Hub is also designed to sound an alarm and display red LED lights.
If your baby’s heart rate or oxygen level falls outside, the customized
ranges. Alarms emitted from the Hub may be silenced by a single touch on the
Touch button on top of the Hub or via the button in the In-App alert.
Note: All Alerts and Events are Recorded in the timeline and can be accessed
via the Hälsa App.
Hälsa App Push Notifications & In-App Alerts: · Baby is Sleeping or Awake ·
Low or High Heart Rate (with current measurement) · Low or High Oxygen Level
(with current measurement) · Battery Low or Charge Now · Wi-Fi Disconnected ·
Weak Signal · Bluetooth Disconnected · Travel Mode Disconnected · Travel mode,
Bluetooth Off · Room temperature and humidity
Hälsa Hub Alarms: · Low or High Heart · Low or High Oxygen Level
For more information visit Hälsababy.com The Hälsa Baby All-In-One Wellness
Monitor is not a medical device and is not intended to diagnose, treat, cure,
monitor, or prevent any medical conditions or illnesses.
Warnings / Important Safety Information
The Hälsa Baby All-In-One Wellness Monitor is not a medical device and is not
intended to diagnose, treat, cure, monitor, or prevent any medical conditions
or illnesses.
· Our products are meant for use with healthy children up to 18 months of age.
· Do not attempt to use our products as a diagnostic tool or to rely upon them
for diagnosis.
· Do not use our products if your doctor recommends the use of hospital-grade
monitors/equipment.
· Do not use our products as a replacement for or in lieu of adult and/or
medical care or professional medical advice.
· Do not use our products as a reason to practice unsafe sleep. Our products
are intended to be used in conjunction with safe sleep practices.
WARNING: OUR PRODUCTS ARE NOT MEDICAL DEVICES. They do not provide
notifications that assess your baby’s health, and should not be relied upon
for any type of clinical monitoring. Our products are only intended to assist
you in tracking your child’s general wellness and are not intended to replace
you as a caregiver. You are responsible for the health and well-being of you
and your child, and following safe sleep, health, and care guidelines. The
absence or occurrence of a notification is not an indication of your baby’s
health status.
SAFETY
For INDOOR use only. DO NOT use HUB/Sensor near water (such as bathtub, sink,
etc.) or submerge in water. To reduce the risk of fire or electrical shock, DO
NOT expose this product to water or moisture. NEVER attempt to disassemble the
product. This is dangerous and will void the warranty.
POWER CORD PROTECTION: NEVER attempt to use cord without the protective
covering. Check protective covering before each use to ensure that the cord is
not exposed to your child. Immediately discontinue use if the protective
covering is damaged or broken.
VENTILATION: DO NOT block ventilation openings. DO NOT place on a bed, sofa,
rug or similar surface. DO NOT place in a bookcase or cabinet that may
restrict airflow. Avoid exposing the product to excessive dust or debris. Keep
the product in a clean and dust-free environment whenever possible.
HEAT: The monitor should be situated away from heat sources, such as
radiators, heat registers, stoves or other appliances that produce heat. Also,
keep these components out of direct sunlight.
OPERATING Temperature & Humidity Range: 0C to 40C & humidity 10% to 95%
relative humidity, non-condensing.
STORAGE Temperature & Humidity Range: (-10) C to 45 C & humidity 5% to 90%,
relative humidity, non-condensing.
STRANGULATION HAZARD — Children have STRANGLED in cords. This device is
designed to be used behind a standard crib and against the wall only. Adult
assembly is required. Keep small parts away from children when assembling.
This product cannot replace adult supervision. Ensure your child’s health by
checking on him/her regularly. This product is not a toy. Do not allow
children to play with it.
The environmental measurement range of the product is 5°C 60°C and is not
suitable for use in harsh environments below 5°C or above 60°C. The humidity
measurement range of this product is 099% RH, keep away from extreme
humidity. This product is only intended for use as a healthy lifestyle tool
and cannot be used as a measuring tool.”
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Changes or
modifications to this product not authorized by party responsible for
compliance could void the electromagnetic compatibility (EMC) and wireless
compliance and negate your authority to operate the product.
Please ONLY use the supplied power adapter. Failure to do so may void our
limited warranty.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures: · Reorient or relocate the receiving antenna. ·
Increase the separation between the
equipment and receiver. · Connect the equipment into an outlet on a
circuit different from that to which the receiver is connected. · Consult the
dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator and your body.
FCC ID: 2BCMF-HALSA (Hälsa Hub) Contains FCC ID: 2AAQS-ISP1807 (Hälsa Smart
Sensor)
This device complies with part 15 of the FCC rules and with innovation,
Science and Economic Development Canada’s license-exempt RSS(s). Operation is
subject to the following two conditions: (1) this device may not cause
interferences, and (2) this device must accept any interferences, including
interferences that may cause undesired operation of the device.
IC:
INPUT :100-240V ~ 50/60Hz 0.5A Max
OUTPUT: DC 5.0V/3A
Setup Instructions Hälsa Baby All-In-One Wellness Monitor
Hälsa Baby Features
-
Download the Hälsa Baby App from the App Store or Google Play Store. You will be prompted to create an account. Once you have completed sign up, you can add a profile for your baby and connect with the hub and smart sensor by following the instructions within the app.
-
Plug the Hub into a power outlet. The light will buffer once the hub is connected to the power outlet.
-
Choose the preferred size for the Ankle Band. Place the Smart Sensor into the ankle band, ensuring you slide the smart sensor all the way down into the fabric pocket. The smart sensor is secure when the button is visible through the hole on the exterior of the ankle band’s fabric. If placed correctly, the Silver metal circle on the inside of the smart sensor should be visible through the fabric near the bottom of the ankle band.
-
Place the Smart Sensor and Ankle Band on the Hub, with the exterior of the smart sensor, logo side down, so it is touching the charging ring. When charging is in progress, a green LED light from the smart sensor will blink.
Warnings / Important Safety Information
The Hälsa Baby All-In-One Wellness Monitor is not a medical device and is not
intended to diagnose, treat, cure, monitor, or prevent any medical conditions
or illnesses.
· Our products are meant for use with healthy children up to 18 months of age.
· Do not attempt to use our products as a diagnostic tool or to rely upon them
for diagnosis.
· Do not use our products if your doctor recommends the use of hospital-grade
monitors/equipment.
· Do not use our products as a replacement for or in lieu of adult and/or
medical care or professional medical advice.
· Do not use our products as a reason to practice unsafe sleep. Our products
are intended to be used in conjunction with safe sleep practices.
WARNING: OUR PRODUCTS ARE NOT MEDICAL DEVICES. They do not provide
notifications that assess your baby’s health, and should not be relied upon
for any type of clinical monitoring. Our products are only intended to assist
you in tracking your child’s general wellness and are not intended to replace
you as a caregiver. You are responsible for the health and well-being of you
and your child, and following safe sleep, health, and care guidelines. The
absence or occurrence of a notification is not an indication of your baby’s
health status.
SAFETY For INDOOR use only. DO NOT use HUB/Sensor near water (such as bathtub,
sink, etc.) or submerge in water. To reduce the risk of fire or electrical
shock, DO NOT expose this product to water or moisture. NEVER attempt to
disassemble the product. This is dangerous and will void the warranty.
POWER CORD PROTECTION: NEVER attempt to use cord without the protective
covering. Check protective covering before each use to ensure that the cord is
not exposed to your child. Immediately discontinue use if the protective
covering is damaged or broken.
VENTILATION: DO NOT block ventilation openings. DO NOT place on a bed, sofa,
rug or similar surface. DO NOT place in a bookcase or cabinet that may
restrict airflow. Avoid exposing the product to excessive dust or debris. Keep
the product in a clean and dust-free environment whenever possible.
HEAT: The monitor should be situated away from heat sources, such as
radiators, heat registers, stoves or other appliances that produce heat. Also,
keep these components out of direct sunlight.
OPERATING Temperature & Humidity Range: 0C to 40C & humidity 10% to 95%
relative humidity, non-condensing.
STORAGE Temperature & Humidity Range: (-10) C to 45 C & humidity 5% to 90%,
relative humidity, non-condensing.
STRANGULATION HAZARD — Children have STRANGLED in cords. This device is
designed to be used behind a standard crib and against the wall only. Adult
assembly is required. Keep small parts away from children when assembling.
This product cannot replace adult supervision. Ensure your child’s health by
checking on him/her regularly. This product is not a toy. Do not allow
children to play with it.
The environmental measurement range of the product is 5°C 60°C and is not
suitable for use in harsh environments below 5°C or above 60°C. The humidity
measurement range of this product is 099% RH, keep away from extreme
humidity. This product is only intended for use as a healthy lifestyle tool
and cannot be used as a measuring tool.”
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Changes or
modifications to this product not authorized by party responsible for
compliance could void the electromagnetic compatibility (EMC) and wireless
compliance and negate your authority to operate the product.
Please ONLY use the supplied power adapter. Failure to do so may void our
limited warranty.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures: · Reorient or relocate the receiving antenna. ·
Increase the separation between the
equipment and receiver. · Connect the equipment into an outlet on a
circuit different from that to which the receiver is connected. · Consult the
dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator and your body.
FCC ID: 2BCMF-HALSA (Halsa Hub) Contains FCC ID: 2AAQS-ISP1807 (Smart Sensor)
This device complies with part 15 of the FCC rules and with innovation,
Science and Economic Development Canada’s license-exempt RSS(s). Operation is
subject to the following two conditions: (1) this device may not cause
interferences, and (2) this device must accept any interferences, including
interferences that may cause undesired operation of the device.
IC:
INPUT :100-240V ~ 50/60Hz 0.5A Max
OUTPUT: DC 5.0V/3A