Bega 50 199.1 Wall Washers Instruction Manual

: June 3, 2024
: BEGA

Table of Contents

Bega 50 199.1 Wall Washers
DIMENSIONS
Application
Product description
Safety
Overvoltage protection
Installation
Cleaning · Maintenance
Replacement of the LED module
Spares
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Bega 50 199.1 Wall Washers

DIMENSIONS

Bega 50 199.1 Wall Washers 1

Application

Wall washer · indoor luminaire with symmetrical light distribution for the illumination of wall surfaces with the mounting surface being the reflection surface. The luminaire can be installed with the light distribution opening upwards or downwards.

Product description

Die-cast aluminium and aluminium housing, finish Colour velvet white
Matt safety glass
Reflector made of pure anodised aluminium
2 mounting holes ø 4.5 mm
Distance apart 200 mm
2 cable entries for through-wiring of mains supply cable ø 7-10.5 mm, max. 5 G 1.5@ Connecting terminal and
earth conductor terminal 2.5@
2-pole connecting terminal for
digital control
LED power supply unit
220-240 V x 0/50-60 Hz
DC 170-276 V
DALI-controllable
Basic insulation is provided between the mains and control cables
BEGA Thermal Control®
Temporary thermal regulation to protect temperature-sensitive components without switching off the luminaire
Safety class I
Impact strength IK07
Protection against mechanical
impacts < 2 joule
r – Safety mark
c – Conformity mark
Weight: 2.9 kg
This product contains light sources of energy efficiency classes D, E

Safety

The installation and operation of this luminaire are subject to national safety regulations. Installation and commissioning may only be carried out by a qualified electrician.
The manufacturer accepts no liability for damage caused by improper use or installation. If subsequent modifications are made to the luminaire, the person responsible for these modifications shall be considered the manufacturer.

Overvoltage protection

The electronic components installed in the luminaire are protected against overvoltage in accordance with DIN EN 61547. To achieve an additional protection against e. g. transients, etc. we recommend separate overvoltage protection components. You can find them on our website at www.bega.com.

Lamp

Module connected wattage 32.7 W
Luminaire connected wattage 36.1 W
Rated temperature ta = 25 °C
Ambient temperature ta max = 40 °C

50 199.1 K27

Module designation LED-0609/927
Colour temperature 2700 K
Colour rendering index CRI > 90
Module luminous flux 4675 lm
Luminaire luminous flux 4034 lm
Luminaire luminous efficiency 111,7 lm / W

50 199.1 K3

Module designation LED-0609/930
Colour temperature 3000 K
Colour rendering index CRI > 90
Module luminous flux 4830 lm
Luminaire luminous flux 4168 lm
Luminaire luminous efficiency 115,5 lm / W

50 199.1 K4

Module designation LED-0609/940
Colour temperature 4000 K
Colour rendering index CRI > 90
Module luminous flux 5025 lm
Luminaire luminous flux 4337 lm
Luminaire luminous efficiency 120,1 lm / W

Installation

Undo hexagon socket head screws (wrench size 3 mm) through the opening in the luminaire housing up to the stop and lift luminaire top. Loosen earth connection (plug connection) and LED-connection between luminaire top and luminaire base. LED are high-quality electronic components! Please avoid touching the light output opening of the LED directly during installation or relamping. Lead the mains supply cable through the cable entry of the luminaire base. Ensure correct directionality towards the area to be illuminated. Fix luminaire base with enclosed or any other suitable fixing material onto the mounting surface. Make the earth conductor connection and the electrical connection. For digital control please use the connecting terminal DA, DA. In case this terminal is not used the luminaire will be operated at full light output. Make earth connection (plug connection) and LED-connection between luminaire top and luminaire base again. Install the luminaire top, press-on and tighten screws evenly.

Cleaning · Maintenance

Clean luminaire regularly with solvent-free cleansers from dirt.

Replacement of the LED module

The designation of the LED module is noted on a label in the luminaire. The light colour and light output of BEGA replacement modules correspond to those of the modules originally fitted. The module can be replaced by qualified persons using standard tools. Disconnect the system and open the luminaire. Please follow the installation instructions for the LED module. Defective glass must be replaced. Close the luminaire.