Dongguan S6 Portable Speaker User Guide

Dongguan S6 Portable Speaker

Specifications

What’s In The Box

Buttons And Indicator Lights

Using your speaker

Turn on/off

1. Press the power button for 3s to power on the speaker
2. The speaker will not automatically turn off. Please turn it off manually

Pair with Your Device

1. Navigate to your device’s Bluetooth setting. enable Bluetooth, and tap LiveSound” and pair
2. The speaker will automatically connect to the last connected device if available. If hot, the speaker will enter pairing mode.
   Have a connection problem? Remove “live sound” from your device’s Bluetooth devices list, and ensure it’s less than 1 meter away. Then try to pair again

Connect via AUX

1. Turn on the speaker
2. Find out the 3.5mm audio cable which is included in the packing box connect the two ends of the 3.5mm audio cable to the 3.5mm audio jacks of the speaker and your device respectively.

Wireless Dual Stereo Pair

1. Turn on two Speakers
2. Make sure neither of the speakers are connected with any device (long-press the Pause button to remove the speakers from your device’s Bluetooth history)
3. Long press and together of one speaker until you hear the prompt tone ‘DENG DENG DENG”. Then the two speakers are paired successfully
4. Open your device’s Bluetooth Setting. search and tap LiveSound to pair.

Wireless Hands-Free Speakerphone
The hands-free speakerphone feature works over Bluetooth with Bluetooth- enabled smartphones only.

Recharge the Speaker
To preserve battery lifespan, fully charge at least once every 45 days

Button Control

Indicators

CONTROL COLORFUL LIGHTS

1. Short press the button to get breathing light effects (cycle through seven different colors)
2.  Short press the button once more to get the single color flowing light which will run up and down along with the rhythm of the music cycle through seven different colors)
3. Short press the button once more to get the multi-color flowing light which will run up and down along with the rhythm of the music seven colors change dynamically)
4.  Short press (the button once more to turn off the light.
5. The light will automatically turn off when you pause music playback over 10 minutes.
6. The brightness of the light changes with the volume level The louder the sound, the brighter the colorful Tight

RESET YOUR SPEAKER

If the speaker is stuck. press and hold the power button for 10 secondis,.
hen release the button, the speaker now has been reset.

PRECAUTIONS

1. The speaker will not automatically turn off. Please turn it off manually when it is not in use.
2. Close the waterproof rubber cover completely before putting the speaker into the water
3. The battery may go to sleep or die if it doesn’t use in a long time. please charge at least once every 45 days.
4.  Avoid leaving the speaker in an extreme temperature environment ( extreme cold or hot weather outside may damage t battery.
5. Do not use any corrosive cleaner/ oil to clean.
6.  Do not charge near the water source or in the rain to avoid electric shock.
7. Keep the speaker away from heat sources (such as direct sun light. fire, stoves, engines or other equipment that generates heat) Avoid dropping.
8.  Do not disassemble.

ONE YEAR WARRANTY

Our products are covered by a 12-month limited warranty., starting from the date of purchase. This warranty is not transferable and applies only to the original customer purchaser

FCC Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not instaled and used in accordance with tne instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not OCCur in a particular installation. If this equipment does cause harmful interference to radio or television reception, wnich can be determined by turning the equipment oft and on, the user Is encouraged to try to correct the interference by one or more of the following measures:

• Recent or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet ona circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1 )this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>