COOPER Lighting Solutions LT4-DM Triac Halo QuickLink Low Voltage Lighting Kit Installation Guide
- June 9, 2024
- COOPER Lighting Solutions
Table of Contents
LT4-DM Triac Halo Quick Link Low Voltage Lighting Kit
Installation Guide
LT4-DM Triac Halo Quick Link Low Voltage Lighting Kit
Project: ——————
Catalogue # ————
Type: ———————-
Prepared by: ————
Notes: —————–
Date: ———————–
Typical Applications
- Residential
Product Certification
Refer to ENERGY STAR® Certified Products List.
Can be used to comply with California Title 24 High Efficacy requirements.
Certified to California Appliance Efficiency Database under JA8.
Product Features
Interactive Menu
- Order Information page 2
- Product Specifications page 2
- Photo metric Data page 4
- Product Warranty
Top Product Features
- Single driver powers multiple LED fixtures connected by low voltage cable
- Selectable CCT: 2700 K, 3000K, 3500K, 4000K, 5000K
- Direct mount – does not require recessed housing or junction box
- 120 V input, dimmable down to 10% with select phase cut dimmers
- Perfect for new construction or remodel work
- Power supply and LED units are IC rated
Quick Link Low Voltage Kit
Order Information
SAMPLE ORDER NUMBER: (1) LTQL4069S1EDM-4PK, (2) LTQL4069S1EDM
Purchase kit and additional fixtures separately.
Low Voltage Lighting Kit
Kit includes (1) 70 W low voltage remote driver, 35 ft of low voltage CM
cable, (4) LTQL4 fixtures
Model| Lumens| CRI/CCT| Driver| Installation| Kit
Size
---|---|---|---|---|---
LTQL4 = 4-inch LT Quick Link Low
Voltage Lighting| 06 = 600 lumens (nominal)| 9 S = 90 CRI min,
5-color selectable CCT| 1 E = 120 V, phase cut 5% dimming| DM =
Direct mount can less
installation| 4PK =4 pack kit
including driver
Notes| Notes| Notes| Notes| Notes| Notes
Additional Fixtures (1)
Driver NOT included. Connect additional fixtures to Low Voltage Lighting
Kit.
Model | Lumens | CRI/CCT | Driver | Installation |
---|---|---|---|---|
LTQL4 = 4-inch LT Quick Link Low Voltage Lighting | 06 = 600 lumens | |||
(nominal) | 9 S = 90 CRI min, 5-color selectable CCT | 1 E = 120 V, | ||
phase cut 5% dimming | DM = Direct mount can less installation | |||
Notes | Notes | Notes | Notes | Notes |
(1) Maximum 8 fixtures per driver.
Accessories
Mounting Frames(2)
HL4RSMF = 4” round and square mounting frame
Notes
(2) Due to its size, the Quick Link Remote Driver must mount to the building
structure, not a mounting frame.
Fixture Count
Model| Watts per Downright| Max Down lights
LT-DM 4” Triac| 7.0 W| 8
Product Specifications
Modules
- Module construction includes LED Array, heat sink, reflector, lens, splay and trim ring.
- Regressed splay
- Heat sink designed to conduct heat away from the LED Array
Gaskets
- Closed cell gasket achieves restrictive airflow requirements without additional caulking
LED Array
- Plurality of mid power LED’s provides a uniform source with high efficiency and long life
- 90 color rendering index (CRI) minimum; R9 greater than 50 provides high color rendering
- Field selectable color temperature, select 2700 K, 3000K, 3500K, 4000K or 5000K CCT; color accuracy within 4 SDCM
- Meets ENERGY STAR® color angular uniformity requirements
Optical Assembly
- Regressed lens
- Impact-resistant poly carbonate
- Convex form and lamp-like appearance
- Diffuse for even illumination
Junction Box
- Pre-galvanized steel driver/junction box with captive hinged junction box cover
- Hinged junction box for easier installation into ceiling plenum
- Three 1⁄2” conduit pry-outs
- Two Slide-N-Side™ non-metallic (NM) wire traps allows wiring outside the box
- Accepts NM cable types: 14-2, 14-3, 12-2, 12-3 (U.S.) and 14-2, 14-3, 12-2 (Canadian)
- Three 4-port push wire nuts with clear caps for quick and reliable mains voltage connections
- Integral mounting holes facilitate direct mounting to building structure
Driver
- 70 W 120 V, providing noise free operation
- Continuous flicker-free dimming down to 10% with select phase cut dimmers
- Inline electrical quick connect provides low voltage connection to fixture fitting
Installation
- Can be installed in 1/2” to 1-1/4” thick ceilings
- Heat treated springs hold fixture fitting securely in the ceiling
- Halo Quick Link Quick Connectors allow for quick installation of additional fixtures
Compliance
- UL Certified for US and Canada
- NOTE: Not for use in direct contact with spray foam insulation, reference NEMA LSD57-2013
- Wet location listed and IP44 ingress protection
- Airtite per ASTM-E283-04
- Suitable for use in clothes closets when installed in accordance with the NEC 410.16 spacing requirements
- EMI/RFI emissions per FCC 47CFR Part 15 consumer limits
- Contains no mercury or lead and RoHS compliant
- Photo metric testing in accordance with IES LM-79-08
- Lumen maintenance projections in accordance with IES LM-80-08 and TM-21-11
- Compliant with California Title 24 High Efficiency LED under JA8, reference Modernized Appliance Efficiency Database System (MAEDBS) for 2019 JA8 High Efficacy Lighting
- ENERGY STAR® certified (reference “Certified Light Fixtures” database)
Warranty
- Five year limited warranty, consult website for details. www.cooperlighting.com/legal
Dimensional and Mounting Details
Photo metric Data
LTQL4069S1EDM-3000K-UNIT
Spacing criterion: (0-180) 1.12/(90-270) 1.18/(Diagonal) 1.20
Beam Angle: 87°
Field Angle: 132°
Lumens: 675
Input Watts: 7.1 W
Efficacy: 95.1 LPW
Test Report:
LTQL4069S1EDM-3000K-UNIT.ies
Zonal Lumen | Lumens | % Lumens |
---|---|---|
0-30 | 257 | 38.2 |
0-40 | 401 | 59.5 |
0-60 | 617 | 91.5 |
0-90 | 975 | 100 |
TM-30-15 | Rf = 92 | |
--- | --- |
Rg = 98
CRI/CIE| Ra = 93
R9 = 58
CCT – Range of 2700 K- 5000K
Note: Lumen output may decrease based on distance from power supply and
quantity of LED heads used.
Energy Data – 4 Pack Kit
Lumens | 2700 Im ® 3000K |
---|---|
Input Voltage | 120 V |
Input Current | 0.29 (A) |
Input Power | 34 (W) |
Efficiency | 78.7 (LPW) |
Inrush (A) | 14 A @ 700 pS |
THD | ≤ 20% |
PF: | ≥ 0.9 |
T Ambient | -30 – +40°C |
Sound Rating | ≤ 22 dba |
LTQL4069S1EDM – Individual Fixture
| CCT| Watts| Lumens| LPW| CRI
Individual Downright 650LM| 2700 K| 7.1| 625| 88| 92
3000 K| 7.1| 675| 95.1| 93
3500 K| 7.2| 700| 97.2| 94
4000 K| 7.2| 715| 99.3| 94
5000 K| 7.2| 715| 99.3| 93
LTQL4069S1EDM-4PK – System
4PK-System 2600lm| CCT| Watts| Lumens| LPW| CRI
2700 K| 34.6| 2500| 72.3| 93
3000 K| 34.3| 2700| 78.7| 94
3500 K| 34.3| 2800| 81.6| 94
4000 K| 34.4| 2860| 83.1| 94
5000 K| 35.1| 2860| 81.5| 92
Product Specifications
LTQL4069S1EDM
Lumens | 675 |
---|---|
Watts | 7.1 |
Lumens Per Watt (Efficacy) | 95.1 |
Color Accuracy (CRI) | 93 |
Cooper Lighting Solutions
1121 Highway 74 South
Peach tree City, GA 30269
P: 770-486-4800
www.cooperlighting.com
© 2022 Cooper Lighting Solutions
All Rights Reserved.
Specifications and dimensions subject to change without notice.
PS51800522
January 12, 2022 1:59 PM