lionelo Maya High Chair User Manual

: June 3, 2024
: lionelo

Table of Contents

lionelo Maya High Chair
Introduction
Description (see: fig. 1 and 2)
Cleaning and storage
Warranty conditions
Lionelo Service – Support
Read User Manual Online (PDF format)
Download This Manual (PDF format)

lionelo Maya High Chair

Introduction

Dear customer!
Thank you for placing trust in us and choosing Lionelo. Our products are manufactured with utmost care to provide your child with comfort and safety. Thanks to the use of highquality materials and modern solutions, we provide you with a product perfect for everyday use. Should you have any remarks or questions concerning the product, please do not hesitate to contact us: pomoctechniczna@lionelo.com
The product has been tested and complies with BS EN 14988:2017+A 1 :2020, EN 12790:2009 standards.

Producer: Brandline Group Sp. z o. o. ul. A Krglewskiego 1, 67-248 Poznan, Poland

Warnings for high chair:

IMPORTANT! READ CAREFULLY AND KEEP FOR FUTURE REFERENCE

WARNING

Never leave the child unattended
Always use the restraint system.
Falling hazard: Prevent your child from climbing on the product.
Do not use the product unless all components are correctly fitted and adjusted.
Be aware of the risk of open fire and other sources of strong heat in the vicinity of the product.
Be aware of the risk of tilting when your child can push its feet against a table or any other structure.
Do not use the product until the child can sit on its own.
Do not use the product if any of its parts or elements is damaged or torn-out.
Do not let your child get close when you assemble and disassemble this product.
The product is intended for children who can sit on their own. The product can be used by children aged 0.5- 3 and with maximum weight of 15 kg.
Always use the crotch protection, the child must always be secured on a high chair, in any position. The tray cannot fully protect the child.

IMPORTANT! KEEP FOR FUTURE REFERENCE

WARNING

Never leave the child unattended.
Do not use this bouncer seat when your child can sit on its own.
This bouncer seat is not intended for child’s long sleep.
Placing the bouncer seat on a platform, e.g. on the table, is dangerous.
Always use all protective devices.
The maximum weight of the child the bouncer seat is intended for is 9 kg.
This bouncer seat cannot replace the child cot or regular bed. If your child needs to sleep, it should be placed in a suitable cot or bed.
Do not use the product if any of its parts is damaged or missing.
Do not use accessories or spare parts other than supplied by the manufacturer.
Use the bouncer seat on a flat, even and horizontal flooring.
The bouncer seat is intended for babies O+, up to 9kg.

Description (see: fig. 1 and 2)

lionelo-Maya-High-Chair-FIG-1

Seat with backrest
Seat inclination adjustment key
Wooden legs
Chair legs connector
Tray
Plastic crotch protection
Footrest
Plastic high chair pads
Skids
Tray adjustment key

A. Seat with backrest
B. Upper part of high chair legs (x4)
C. Lower part of high chair legs (x4)
D. High chair legs connector
E. Two-layer tray
F. Plastic crotch protection
G. Skids (x2)
H. Footrest
I. Plastic low chair leg pads (x4)
J. Bolts (x8)
K. Footrest screws (x4)
L. Screwdriver

How to install high chair (see fig. 1, 2 and 3):

Legs elements are marked (A, B, C, D), adjust upper (A) and lower (B) legs to one another, as in the pattern: (A+A, B+B, C+C, D+D).

Screw upper legs (B) in lower legs (C) in relevant marking of the high chair.
Screw folded high chair legs (Band C) into holes on sides of the seat (A).
The chair legs connector (D) must be screwed with four bolts (J) into chair legs (Band C).
Screw the footrest with screws (K) in the high chair legs connector (D).
Place the plastic crotch protection (F) in seat holes (A) until you can hear a .click”.
Rotate plastic pads (8) and adjust to the floor to increase stability of the high chair.
To provide your child with maximum safety, make sure all elements have been properly and securely tightened.
Hold side tray keys (7 O) by pulling them out. Insert the tray (E) in the seat holder (A), set one of three available positions of the tray (E).
The first and second position of seat inclination is intended for the function of the high chair.

Warning!
The high chair can be used by a child aged up to 3, whose weight does not exceed 15 kg and who can sit on its own! 3-stage seat inclination adjustment (A) (see fig. 4 and 1 ), how to fasten and undo safety belts (see fig. 5).

Press the adjustment keys (2) on both sides of the seat and set one of three positions which best suits your child.
Put the child in, insert right and left part of the hip belt in the central buckle until you can hear a .click” and fasten safety belts.
To undo safety belts, press the central key and take belts out of the central buckle.

How to install low chair (see fig. 6 and 2):

Unscrew lower legs (C) of the high chair. Attach plastic pads of the low chair (I), screw four bolts (J) in upper legs (B) of the chair and make sure they have been properly fixed.
The first and second position of seat inclination is intended for function of the low chair.

Additional option is a low chair with bouncer seat with skids (does not belong to basic set) (see fig. 7, 1 and 2):

Convert low chair (fig. 6) into bouncer seat: unscrew four bolts (J) from upper legs (B) of the chair and remove plastic pads of the low chair (I).
Next adjust skids (G) and screw four bolts in upper legs of the chair (C). Press the seat adjustment key (2) to select one of three available seat inclination positions.
The third position of the seat inclination is intended for the bouncer seat.

Warning!
The bouncer seat can be used by a child whose weight does not exceed 9 kg and who cannot sit on its own!

Cleaning and storage

Do not expose the chair to sunlight for a long time.
Cushions must not be cleaned chemically or ironed.
For cleaning, use soft cleaning agents.
Frequently check the chair for damage and loose elements.
Wipe the seat with a wet cloth.
Do not use abrasive agents.
In case of any dirt on the top tray, you can wash it in the dishwasher.
Stop using the chair after you have identified any damage.

Illustrations are for informational purposes only. The actual appearance of the products may differ from the pictures.

Warranty conditions

The Lionelo brand with its registered office at A. Kr glewskiego 1, 61-248 Poznari, Poland guarantees that the equipment is operational in accordance with the technical-operating conditions described in the manual.
The warranty is granted for a 60 months period from the date of sale. If the Buyer is a company 0/AT invoice), the warranty is granted for a 12-month period.
The warranty is valid in the country of purchase.
Revealed manufacturing defects shall be removed during the warranty period free of charge by the Authorised Manufacturer Service.
Any defects or damages discovered and reported within the warranty period will be removed free of charge within 21 working days, but in justifiable cases (for instance, spare parts must be brought from abroad) this period may be extended by another 30 days.
Any defects or damages to the equipment should be reported and delivered to the service site immediately after being revealed.
Acoessories included with the devices are under 3-month warranty from the date of purchase.
In case of an unjustified complaint (a complaint of efficient product or the mechanically damaged one), the person who reports a complaint shall be charged for transportation cost.
The Customer is entitled to replacement of the product to another with the same or similar specifications (and) colours if the Service determines that the removal of defects is not possible.
The service is not responsible for any loss of data.
The warranty will be respected only if the customer attaches (to the faulty device) a damage description, all of the accessories received at the moment of the equipment purchase, and proof of purchase containing the date of sale.
The warranty does not cover. natural wear of the product related to its normal operation, damage resulted from improper usage or non-rompliance of the instructions described in the manual, tears or cracks caused by the Customer, fading of fabric resulting from prolonged exposure to sunlight or washing the product or its parts in the wrong temperature, mechanical, electrical, thermal and intentional damages and defects caused by them, as well as damage caused by unauthorised modifications or repairs.
The Service may refuse to repair products in case of any traces of unauthorised repair.
If the fault is not covered by the manufacturers warranty, paid repair may be offered by the Service.
Neither the Manufacturer nor the Authorised Service is responsible for any damages or losses arising from the inability to use the device that is being repaired.
The product that has not been collected from the service site within 3 months can be charged with storage cost appropriate to the storage time.
Delivery of the product which is incomplete or lack of proper packaging is equivalent to the failure of the warranty conditions by the Buyer, and it can provide a basis to refusal of the repair or extension of the repair period.
In case of sending the product for repair, when no defect is found, the expenses for the expert assessment shall be fully borne by the consumer.
If the product (sent for repair) works properly, and the reason of its invalid operation is, for instance, a low battery, the Consumer shall bear the cost of the expert assessment.
The product warranty shall not exclude, limit or suspend the Customer rights resulting from the guarantee.
Only clean products in original or replacement packagings can be reclaimed.