Thunder Scientific Corporation 2500 Humidity Generator Instruction Manual
- June 13, 2024
- Thunder Scientific Corporation
Table of Contents
Model 2500
Humidity Generator Shipping Instructions
Tech Support Document TSD-0310
Revision Date: July 14, 2021
623 WYOMING BLVD. SE
ALBUQUERQUE, NM 87123-3198
WWW.THUNDERSCIENTIFIC.COM
TEL: 505.265.8701
FAX: 505.266.6203
2500 Shipping Instructions
- Before you proceed to the shipping of your 2500, you will need to drain the test chamber of the system, refer to Tech Support Document, TSD-0208 for Chamber draining instructions.
- Remove the air input hose at the rear of the system.
- Next remove the air input elbow.
- Tape chamber temperature probe to the chamber wall.
- Remove the AC Power cord, no need to send it.
- Remove the blue chamber insulation foam and anything else inside the chamber.
- If you have a manifold remove it and anything else inside the chamber.
- Repack in original shipping crate or ask for TSC supplied shipping case.
- Add the appropriate banding for shipping.
- Apply shipping label for return to TSC.
Note: It is highly recommended you use an Air-Ride equipped truck when
shipping the unit back to Thunder.
Please Call 1-800-872-7728, Fax
1-505-266-6203, or E-mail
support@thunderscientific.com should
you have any questions.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>