AIRPREP 08202021 Cub Sampler Components User Guide
- June 17, 2024
- AIRPREP
Table of Contents
AIRPREP 08202021 Cub Sampler Components
AirPrep Cub Sampler Components
- Cub Inlet – Twists off for placement of Quiet Dock Collar
- Quiet Dock Collar – Attaches to cub with a half-screw motion
- Cub- The central part of the cub, which hosts power controls
- Quiet Dock base- sits below the Cub as a sturdy base
You will notice the power cord insertion tool, socket, and rubber insert
located within the foam of the Quiet Dock base. (Figure 2
The power cord insertion tool will be used for inserting the power cord jack
into the socket on the base to transform the Quiet Dock into a docking station
for powering/charging your AirPrep Cub Sampler.
- 1. Inserting the AirPrep power cord into the base of the Quiet Doc (Figure 3)
- a. Remove the rubber insert (figure 2) and push it onto the power cord jack.
- b. Firmly insert the power cord jack into the socket on the Quiet Dock base.
- c. Place the power cord insertion tool on top of the power cord jack.
- d. i. Use one hand to push on the power cord insertion tool with your palm while firmly pulling the cord into the slot with your other hand. Keep the Quiet Dock base steady by putting your hand over the entire top of the base.
- ii. Return the power cord insertion tool to its place in the foam.
Dock Base and Collar
Attaching the Dock Base and Collar to the AirPrep
Cub Sampler (Figure 4)
- a. Set the Cub onto the Quiet Dock base. Ensure the plug is fully seated, and that the sampler will power on.
- b. Remove the inlet and set it aside.
- c. Attach the Quiet Dock Collar in place of the inlet using a half screw motion.
- d. Once the Quiet Dock Collar is attached, attach the inlet to the top of the Quiet Dock.
Disassembling
Disassembling the Power Cord Jack on the Quie Dock (figure 5)
- a. To remove the power cord jack, hold the cord and Power Cord Insertion Tool in one hand and pry it up.
- b. Use the protrusion on the power cord insertion tool to pry the rubber insert out. Return the power cord insertion tool to its place in the foam.
Need help or have questions?
- Contact : customerservice@innovaprep.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>