Razer RC30-026902 USB Wireless Transceiver Instruction Manual
- June 6, 2024
- Razer
Table of Contents
Razer RC30-026902 USB Wireless Transceiver
WHAT INSIDE AND WHAT NEEDED
WHATS INSIDE
WHATS NEEDED
LETS GET YOU COVERED
Canada Statement
This device contains license-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science and Economic Development Canada’s license-exempt
RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
GETTING STARTED
CHARGING YOUR HEADSET
Connect your Razer BlackShark V2 Pro to a powered USB port using the charging
cable.
For best results, please fully charge your headset before using it
for the first time. A depleted unit will fully charge in about 3 hours.
STATUS INDICATOR BEHAVIORS
CONNECTING YOUR HEADSET
TO YOUR PC VIA USB PORT
- Plug the USB wireless transceiver to your PC.
- Press and hold the power button until the status indicator is lit, or until you hear a tone.
- Wait until the status indicator briefly becomes static blue indicating that the headset is now connected to the USB wireless transceiver.
- On your PC, right-click on the sound icon on the system tray, and then select Sounds.
- On the Playback and Recording tabs, set Razer BlackShark V2 Pro as the Default Device.
Your headset is now ready to use.
TO OTHER DEVICES VIA USB PORT
Plug the USB wireless transceiver to your device and make sure your Razer
BlackShark V2 Pro is the default input and output audio device
TO DEVICES VIA 3.SMM COMBO PORT
If your device has a 3.5mm audio+ mic combined jack, simply plug the 3.5mm
combo cable from your headset to your device’s audio jack.
POWER BUTTON FUNCTIONS
Power ON/OFF
Power on or off your headset by holding the power button for at least 3
seconds or until you hear 2 short beeps.
Play/ Pause a track
While powered on, press the power button to play or pause the current track.
Next track
While powered on, double press the power button to go to the next track.
Previous track
While powered off, triple press the power button to go to the previous track.
ADJUSTING THE VOLUME
Rotate the volume knob as shown to increase or decrease the volume.
USING THE RAZER™ HYPERCLEAR SUPERCARDIOID MIC
Plug the Razer™ HyperClear Supercardioid Mic to the headphone and bend until
it is parallel to your mouth. Make sure the mic diaphragm is in front and the
air vent is facing away from your mouth .
MUTING/ UNMUTING THE MICROPHONE
Press the mic mute button to mute or unmute the microphone.
EXTENDING YOUR HEADSET’S LIFESPAN
We recommend stretching the headset gently apart before placing them over your
head to minimize headband stress. However, please avoid overstretching the
headset beyond its technical limits.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement
This device complies with FCC radiation exposure limits set forth for an
uncontrolled environment and it also complies with Part 15 of the FCC RF
Rules. This equipment must not be co-located or operating in conjunction with
any other antenna or transmitter. End-users and installers must be provided
with antenna installation instructions and consider removing the no-
collocation statement.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Caution!
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
SAFETY AND MAINTENANCE
SAFETY GUIDELINES
In order to achieve maximum safety while using your Razer BlackShark V2 Pro,
we suggest that you adopt the following guidelines:
Should you have trouble operating the device properly and troubleshooting does
not work, unplug the device and contact the Razer hotline or go to
support.razer.com for assistance.
Do not take apart the device (doing so will void your warranty) and do not
attempt to operate it under abnormal current loads.
Keep the device away from liquid, humidity or moisture. Operate the device
only within the specific temperature range of 0° C (32 ° F) to 40 ° C (104 °
F). Should the temperature exceed this range, unplug and/or switch off the
device in order to let the temperature stabilize to an optimal level.
The device isolates external ambient sounds even at low volumes, resulting in lowered awareness of your external surroundings. Please remove the device when engaging in any activities that requires active awareness of your surroundings.
Listening to excessively loud volumes over extended periods of time can damage your hearing. Furthermore, legislation of certain countries permits a maximum sound level of 86db to affect your hearing for 8 hours a day. We, therefore, recommend that you reduce the volume to a comfortable level when listening for prolonged periods of time. Please, take good care of your hearing.
MAINTENANCE AND USE
The Razer BlackShark V2 Pro requires minimum maintenance to keep it in optimum
condition. Once a month we recommend you unplug the device from the computer
and clean it using a soft cloth or cotton swab to prevent dirt buildup. Do not
use soap or harsh cleaning agents.
LEGALESE
COPYRIGHT AND INTELLECTUAL PROPERTY INFORMATION
©2020 Razer Inc. All rights reserved. Razer, the triple-headed snake logo,
Razer logo, and “For Gamers. By Gamers.” are trademarks or registered
trademarks of Razer Inc. and/or affiliated companies in the United States or
other countries. All other trademarks are the property of their respective
owners.
The Bluetooth® word mark and logos are registered trademarks owned by
Bluetooth SIG, Inc., and any use of such marks by Razer is under license.
Windows and the Windows logo are trademarks or registered trademarks of the
Microsoft group of companies.
Razer Inc. (“Razer”) may have copyright, trademarks, trade secrets, patents, patent applications, or other intellectual property rights (whether registered or unregistered) concerning the product in this guide. Furnishing of this guide does not give you a license to any such copyright, trademark, patent or another intellectual property right. The Razer BlackShark V2 Pro (the “Product”) may differ from pictures whether on packaging or otherwise. Razer assumes no responsibility for such differences or for any errors that may appear. Information contained herein is subject to change without notice.
LIMITED PRODUCT WARRANTY
For the latest and current terms of the Limited Product Warranty, please
visit razer.com/warranty.
LIMITATION OF LIABILITY
Razer shall in no event be liable for any lost profits, loss of information
or data, special, incidental, indirect, punitive or consequential or
incidental damages, arising in any way out of distribution of, sale of, resale
of, use of, or inability to use the Product. In no event shall Razer’s
liability exceed the retail purchase price of the Product.
GENERAL
These terms shall be governed by and construed under the laws of the
jurisdiction in which the Product was purchased. If any term herein is held to
be invalid or unenforceable, then such term (in so far as it is invalid or
unenforceable) shall be given no effect and deemed to be excluded without
invalidating any of the remaining terms. Razer reserves the right to amend any
term at any time without notice.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>