GoodAudio BWS T2 True Wireless Bluetooth Earphone User Manual
- June 5, 2024
- GoodAudio
Table of Contents
BWS T2
TRUE WIRELESS
BLUETOOTH EARPHONE
User Manual
INSIDE THE BOX
| ITEM | QUANTITY | |
|---|---|---|
| Bluetooth Earphone | 2 PCS | |
| Charging Case | 1 PCS | |
| Charging Cable | 1 PCS | |
| Silicone Ear Tips | 6 PCS |
PRODUCT DESCRIPTION
BLUETOOTH PAIRING AND GETTING STARTED
- Fully charge the case and earbuds (charge for 4 hours, until all charging case LED indicators have been lit up).
- Take the earbuds out of the case. They will turn on automatically and connect within 5 seconds.
- Turn on the Bluetooth pairing function on your device.
- Find and select “BWS T2”.
- Choose your best fitting ear tips.
- Put on and adjust earphones for the best fit to enjoy the best sound quality.
CONTROLS AND FUNCTIONS
| FUNCTION | OPERATION | STATUS |
|---|
Turn on| Open upper lid| Earphones
inside the case
Tap and hold the touchpad for 2 sec| The earphones outside of the case
switched off
Play media| Tap touchpad once|
Earphones turned on
Pause media playback| Tap touchpad
once| Media playing
Restart / previous track| Double-tap
(L) touchpad| Media playing or paused
Skip to the next track| Double-tap (R)
touchpad| Media playing or paused
Increase volume| Tap and hold (R)
touchpad| Phone call/media playing
Decrease volume| Tap and hold (L)
touchpad| Phone call/media playing
Activate voice assist| Triple tap (L) touchpad| Earphones turned on
Activate / deactivate low latency
mode| Triple-tap (R) touchpad| Earphones turned on
Switch off| Tap and hold the touchpad
for 5 sec| Earphones turned on
Return earphones into the case and close the lid| Anytime
FUNCTION| OPERATION| STATUS
---|---|---
Answer call| Double-tap touchpad|
Incoming call
End call| Double-tap touchpad| Call in progress
Reject call| Tap and hold the
touchpad| Incoming call
Place the current call on hold and answer a new incoming call| Tap touchpad
once| Call in progress, new incoming call
Switch between an active call and an on-hold call| Double-tap touchpad| One
call active, one call on hold
Reject new incoming call and continue current call| Tap and hold the touchpad
for 1 sec| Call in progress, new incoming call
CHARGING EARPHONES AND CASE
- Return the earphones to the case and close the lid, the earphones will start charging automatically.
- Plugin the charging cable into the USB-C charging port, and the case will start charging automatically.
SAFETY AND CARE
- When not in use, power the headset off and store it in the included protective carrying case.
- Battery performance will decrease when stored in extreme temperatures: below -10°C/14°F or above 45°C/113°F including direct sunlight.
- There are no replaceable/reparable parts in the headset. Disassembling it will void your warranty.
- These earphones are built to last as long as possible, but they are not waterproof. Exposers to excess moisture might void the warranty.
- Do not use flammable gasses as fire or explosion may occur.
- Keep the device and packaging out of reach of children.
CLEANING INSTRUCTIONS
- Remove ear tips from earphones
- Take a cotton swab damp with a small amount of rubbing alcohol or soapy water. Swab the body of the earphones and ear tips. Note: Ear tips can also be submerged fully in rubbing alcohol or hydrogen peroxide
- Allow the earphones and ear tips to dry completely
- Install ear tips on the earphones, and make sure they are attached securely
WARNING
Using headphones at high to moderate volumes for extended periods will result
in permanent hearing damage. It is advised to keep the volume levels at medium
to low at all times. Do not use it when driving a car, cycling, operating
machinery, or performing other activities that require hearing your
surrounding sound.
It is advised to turn the volume on your device all the way down before
connecting your headphones. Then increase the volume gradually until you reach
a comfortable listening level.
TECHNICAL SPECIFICATIONS
- Technology: Bluetooth 5.0, A2DP, HFP, HSP, AVRCP
- Drivers: a 6mm graphene dynamic driver in each earbud
- Sensitivity: 104+/-3dB
- Frequency Range: 20Hz – 20kHz
- Impedance: 16ohm
- Microphone: MEMS mic (silicon microphone)
- Microphone Sensitivity: 42+/-3dB
- Microphone Frequency Range: 100Hz – 10kHz
- Charge Time: 1.5hours (earbuds) + 2hours (charging case)
- Case Charing Input: 5VDC
- Play Time: 8hours + extra 24hours with charging case
- Battery Type: Li-polymer (60mAh for earbuds, 500mAh for charging case)
- Wireless Communication Range: >10m (No obstacles in the surrounding)
MORE INFORMATION
- Colour Options: silver, gold
- Product Size: 59x49x27cm
- Weight: 4.7g for each earbud, 41.8g for the charging case
FAQ
Q: Why do the earphones have no sound when I first tried them on / only one side has sound?
A: The earphones may shut down if the battery level is too low due to over-discharge protection. It can be reactivated by charging it for 4 hours. If there’s still no response, touch and hold the touchpads for 2~3 seconds to activate the earphones manually. If there’s still no response, use a piece of disinfecting wipe to clean the charging pins on the earphones and charging case, let it dry, and then charge it for another 1 hour. The earphones should now function normally. If there’s still no response from the earphones, please contact us at support@goodaudio.biz for further investigation.
support@goodaudio.biz
https://goodaudio.biz/
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>