PRIME-LINE E-2516 Door Latch Strike Plate Installation Guide
- June 15, 2024
- Prime-Line
Table of Contents
PRIME-LINE E-2516 Door Latch Strike Plate
Specifications
- Model Number : E-2516
- Size: 1-7/16″ (36 mm), 1-5/8″ (41 mm), 2-1/4″ (57 mm)
Description
The E-2516 is a strike plate designed for replacement purposes. It is available in three different sizes: 1-7/16″ (36 mm), 1-5/8″ (41 mm), and 2-1/4″ (57 mm). Please ensure you select the appropriate size for your door.
Step 1: Remove old strike plate
- Using a screwdriver, remove the screws securing the old strike plate to the door jamb.
- Gently pull out the old strike plate from its recess.
Step 2: Install new strike plate
- Take the new strike plate and align it with the existing recess on the door jamb.
- Ensure that the screw holes on the strike plate align with the on the recess.
- Insert the screws provided into the holes and tighten them using a screwdriver.
Note : The installation drawings provided in the manual are typical for this style of replacement part. They may not show a part identical to the one you are installing. Please refer to these instructions for proper installation.
Contact Information
If you have any questions or need further assistance, please contact us at:
E-2516
Latch Strike
NOTE : Installation drawings are typical for this style of replacement part. They may not show a part identical to the one you are installing.
Installation
- Remove old strike plate.
- Install new strike plate into existing recess. Insert two screws into face of strike plate and fasten securely.
- Tab may be adjusted forward with screwdriver to obtain firm latching.
26950 San Bernardino Ave., Redlands, CA 92374
© 2010 Prime-Line Products