lionelo LOC Thermup Double bottle warmer User Manual

lionelo LOC Thermup Double bottle warmer

Dear customer!

Should you have any remarks or questions concerning the product, please do not hesitate to contact us: help@lionelo.com

Producer

• BrandLine Group Sp. z o.o.
• ul. A. Kręglewskiego 1, 61-248 Poznań, Poland

Recommended working conditions

• Humidity: 50 – 80 %
• Temperature: 15 – 30°C (59 – 86°F)

IMPORTANT

Please read this operating manual before you start using the product to see its functions and use it in accordance with its intended use. A failure to follow the safety instructions and use at variance with the manual may lead to bodily injuries.

Keep this manual for future reference

1. Do not repair or modify the device on your own. Only an authorized service technician is allowed to perform these operations.
2. This device is not a toy. Do not let children play with it. Keep the device out of reach of children.
3. The device can be used by children aged at least 3 and persons with limited physical, sensory or mental capabilities, as well as persons who lack suitable knowledge and experience in using the device as long as their actions are supervised or if they have been instructed on the safe use of the device and related risks beforehand.
4. Cleaning and maintenance of the device can be performed by children aged at least 8 and when supervised. Keep this device and power cable out of reach of children below the age of 3.
5. The device is intended for home use only. The device is not designed for outdoor use. Do not use it for other purposes, at variance with its intended use.
6. Make sure the power cable does not hang on the edge of the table or top. Make sure the power cable does not contact hot elements. Do not pull it through sharp edges.
7. Connect the device only to the power outlet with earthing. Make sure the power cable has been correctly connected to the source of power.
8. When powering the device, make sure the parameters of the source of power correspond to the parameters specified on the product label.
9. Regularly check the device for damage. Do not use the device if it is damaged. Do not try to repair the device on your own – contact the authorized service center. If the power cable is damaged, it should be replaced by the manufacturer to avoid hazards.
10. After use, during assembly, disassembly and cleaning, the device must be switched off and unplugged.
11. Keep the device away from sharp edges and sources of heat and moisture. The device must not be exposed to direct sunlight.
12. Do not immerse the device or power cable in water or other liquids.
13. Make sure the device does not overheat.
14. Before you insert the bottle in the warmer and pour water in, make sure it is properly tight.
15. Before you switch the device on, make sure there is water inside. Never turn the device on when water is missing.
16. Hot water may cause serious burning. If there is hot water in the device, carefully handle the device.
17. The surface of the device may get hot under the influence of hot water. Please remain careful.
18. Do not move the device if it contains hot water.
19. When heated food reaches the desired temperature, take the bottle out of the warmer. Do not heat food up too long.
20. To make sure the milk is warm enough, pour out a few drops on your forearm and assess the temperature. As for solid foods – taste them to make sure it is not too hot.
21. Before you start cleaning the device, wait until it gets cool.

CE

The product complies with the requirements of the EU directives. Pursuant to the Directive 2012/19/EU, this product is subject to selective collection. Do not dispose of it together with domestic waste as it may pose a threat to the environment and human health. The worn-out product must be handed over to the electric and electronics recycling center.

List of parts

1. Cover
2. Bottle/container basket
3. Touch panel
4. Milk defrosting/heating
5. Constant temperature
6. Food heating
7. Quick heating/disinfecting
8. Value down/up
9. On/off switch
10. Maximum water level

Defrosting and heating

1. Place the bottle in the basket (2, fig. A).
2. Pour water into the warmer. Water must not exceed the maximum level in the basket (10, fig. A).
3. Choose defrosting/heating on the touch panel (4, fig. A).
4. Choose the amount of milk in the bottle through value down or up keys (8, fig. A).
5. The device will start working automatically 3 seconds after you select the function.
6. The display shows heating time. When heating is over, a distinctive sound is emitted.
7. Before you serve food, shake the bottle and then check the temperature. Take the bottle out of the device when heating is finished to avoid food overheating.
8. Heating time depends on the material of the bottle (see: table below).
9. The device will shut down automatically after 30 minutes.

NOTE

• The aforesaid data apply to an initial temperature of 20°C for water and 3-7°C for milk.
• In order to obtain a specific temperature, use the constant temperature function.

Constant temperature

1. This function allows you to keep a constant temperature of milk or water. The default temperature is 40°C.
2. Place the bottle in the basket (2, fig. A).
3. Pour water into the warmer. Water must not exceed the maximum level in the basket (10, fig. A).
4. Select constant temperature on the touch panel (5, fig. A).
5. The display shows the temperature of the heated liquid. The temperature can be adjusted in the range from 37°C to 60°C through value up or down keys (8, fig. A).
6. The device will start working automatically 3 seconds after you select the function.
7. Before you serve food, shake the bottle and check the temperature.
8. The device will shut down automatically after 24 hours.

Food heating

1. Place the heat-resistant container with food in the basket (2, fig. A).
2. Pour water into the warmer. Water must not exceed the maximum level in the basket (10, fig. A).
3. Select food heating on the touch panel (6, fig. A).
4. The display shows the temperature of the heated food. The default temperature is 60°C. The temperature can be adjusted in the range from 60°C to 90°C through value up and down keys (8, fig. A).
5. The device will start working automatically 3 seconds after you select the function.
6. In order to heat food evenly, it is advisable to stir it regularly.
7. The device will shut down automatically after 6 hours.

Quick heating

1. Place the bottle in the basket (2, fig. A).
2. Pour 80 ml of water into the warmer
3. Select quick heating on the touch panel (7, fig. A).
4. The display shows the quick heating time which you have selected. You can adjust the time through value up and down keys (8, fig. A).
5. The device will start working automatically 3 seconds after you have selected the function.
6. The device has a smart memory system that remembers the last heating time settings.
7. The display shows the heating remaining time.
8. When heating is finished, you will hear a distinctive sound. The device switches into a constant temperature mode automatically. The default temperature is 40°C.
9. Before you serve food, shake the bottle and then check the temperature.

NOTE

• In case of quick heating, use the device together with its cover.
• Depending on the amount of milk, the recommended heating time is presented in the table below.

Bottle

|

Initial temp.

| Amount of water| Amount of milk
---|---|---|---
60ml| 120ml| 180ml| 240ml| 280 ml
Glass| 4°C/41°F|

80ml

| 4 min| 6 min| 7 min| 7 min| 8 min
20°C/68°F| 3 min| 5 min| 5 min| 6 min| 6 min
Plastic| 4°C/41°F| 5 min| 7 min| 8 min| 9 min| 10 min
20°C/68°F| 5 min| 6 min| 7 min| 8 min| 8 min

Sterilization

1. Before you start disinfecting, please wash and carefully rinse the bottle and accessories.
2. Pour 80 ml of water into the warmer.
3. Place accessories and the bottle upside down in the warmer.
4. Put the cover on the device.
5. Select disinfecting on the touch panel (7. fig. A).
6. The display shows disinfecting time which you have selected. You can adjust the time in the range from 1 to 30 minutes through value up and down keys (8, fig. A).
7. The device will start working automatically 3 seconds after selecting the function.
8. The display shows disinfection remaining time. When disinfection is finished, the device keeps a constant temperature of the bottle. Please be careful when you are taking the bottle out of the device due to its high temperature.
9. The device will shut down automatically when water evaporates.

Cleaning

1. After every use and before cleaning, unplug the device. Before you start cleaning, wait until the device cools down.
2. Remove water from the device.
3. If you have heated food in the device, make sure there are no remains at the bottom.
4. Wipe the housing and interior of the warmer with a wet soft cloth and then wipe it dry with a clean cloth or paper towel.
5. For cleaning, do not use scrub sponges, scrub agents or any other caustic substances or chemicals.

Descaling

• It is advisable to descale the product on a regular basis, that is every four weeks, to make sure it operates properly.

Method 1

1. Pour 50 mg of white vinegar and 100 ml of cold water into the device.
2. Turn the device on and select disinfecting. Let the device operate for 2-3 minutes.
3. Leave the solution in the device until the scale disappears completely.
4. Before you empty the device, unplug it.
5. Pour the solution out of the device. Pour water into the device, rinse the remains of the solution and then empty the device.

Method 2

1. Mix 10 g of citric acid and 200 ml of cold water in the device.
2. Turn the device on and then select disinfecting. Let the device operate for 2-3 minutes.
3. Leave the solution in the device until the scale disappears completely.
4. Before you empty the device, unplug it.
5. Pour the solution out of the device. Pour water into the device, rinse the remains of the solution and then empty the device.

NOTE

• Do not use other kinds of descalers.
• The pictures are for reference only. The real design of the products may differ from the pictures presented.

Simplified EU declaration of conformity

BrandLine Group Sp. z o. o. hereby declares that the “Thermup Double” product complies with the directive: 2014/30/EU – EMC Directive, 2014/35/EU – LVD Directive, 2011/65/EU – RoHS Directive. The full content of the EU declaration of conformity is available on the following website: https://lionelo.com/deklaracja_zgodnosci/THERMUP_DOUBLE.pdf

• lionelo.com

Thank you for purchasing our product

References

• Lionelo.com - Home

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>