lionelo Bastiaan i-Size Baby Car Seat User Manual

lionelo Bastiaan i-Size Baby Car Seat

Product Information

Specifications:

• Designed for children weighing up to 36 kg
• Height range: 40 cm to 150 cm

Warnings:

1. Do not use a forward-facing seat for children under 15 months old or less than 76 cm tall.
2. Avoid trapping hard and plastic parts by a sliding seat or vehicle door.
3. For rear-facing installation, do not use the seat with an active front airbag.
4. Ensure well-fitted seat belts without twists.
5. Secure the restraint tightly to the vehicle.
6. Make sure lap belts run low to secure the pelvis.
7. Replace the product if exposed to strong factors like impact.
8. Do not modify the seat without approval.
9. Avoid leaving a child alone in the car seat in a vehicle.
10. Secure luggage and items to avoid injury in a collision.
11. Always use the fabric cover with the seat.

Parts Description (Fig. B):

1. Headrest
2. Shoulder belt guide
3. Infant reduction insert
4. Protective cushions for 5-point seat belts
5. 5-point seat belts
6. Seat belt buckle
7. Seat belt tension adjustment strap
8. Seat tilt adjustment lever
9. Headrest adjustment lever
10. Lap belt guide
11. ISOFIX arms
12. ISOFIX sliding lever
13. Seat rotation button
14. Seat base
15. Seat belt tension adjustment button
16. Top Tether belt
17. Top Tether belt length adjuster
18. Top Tether belt hook

Installation in the Car:

Seat Installation:

Seat Position Orientation:

• Rear-facing:
  Put the seat in the semi-reclining position (position 1).

Installation Methods:

• ISOFIX and Top Tether Belt:
  The child fastened with seat belts.

• ISOFIX and Top Tether Belt:
  The child fastened with seat belts.

Frequently Asked Questions (FAQ)

• Q: Can I use this car seat for a child weighing more than 36 kg?
  A: No, the product is designed for children weighing up to 36 kg. Exceeding this weight limit may compromise safety.

• Q: Is it necessary to use both ISOFIX and the Top Tether belt for installation?
  A: It is recommended to follow the installation instructions provided. Using both ISOFIX and the Top Tether belt ensures maximum safety for your child.

• Q: Can I wash the fabric cover of the car seat?
  A: Yes, you can wash the fabric cover according to the manufacturer’s instructions. Ensure it is completely dry before reattaching it to the seat.

Dear customer!
Should you have any remarks or questions concerning the product, please do not hesitate to contact us: at help@lionelo.com.

Producer:
BrandLine Group Sp. z o. o.
A. Kręglewskiego 1, 61-248 Poznań, Poland

• The product meets the requirements of the standard: R129/03.

Information for the growth group from 40 to 105 cm (maximum weight of the child 21 kg)

NOTICE
This is an i-Size Enhanced Child Restraint System. It is approved according to UN Regulation No 129, for use in, i-Size compatible vehicle seating positions as indicated by vehicle manufacturers in the vehicle users’ manual. If in doubt, consult either the Enhanced Child Restraint System manufacturer or the retailer.

Information for the growth group from 100 to 150 cm

NOTICE

• This is an i-Size booster seat Enhanced Child Restraint System. It is approved according to UN Regulation No 129, for use primarily in “ i-Size seating positions” as indicated by vehicle manufacturers in the vehicle user’s manual. If in doubt, consult either the Enhanced Child Restraint System manufacturer or the retailer.
• The product is suitable for installation only in the places marked with the symbol in Fig. B, marked i-Size.
• The product is suitable for installation in the seat marked with the symbol in Fig. A. only forward facing and with the airbag inactive. It is recommended to install the seat only on the rear seats of the car.
• The product is suitable for installation on the seat marked with the symbol in Fig. A. only if the seat is equipped with a seat belt.

WARNINGS

1. The product is designed for children weighing up to 36 kg and with a height between 40 and 150 cm.
2. If your child is less than 15 months old or less than 76 cm tall, do not use a forward-facing seat.
3. Hard parts and plastic parts of the child restraint system should be placed and installed in such a manner that they cannot be trapped by a sliding seat or vehicle door under normal vehicle operating conditions.
4. For rear-facing installation, do not use the seat where the front airbag is active.
5. Any seat belts that hold the child must be well-fitted to the child’s size. The belts must not be twisted.
6. The straps securing the restraint to the vehicle must be tight.
7. Make sure the lap belts run low to adequately secure the pelvis.
8. If the product has been exposed to strong factors (such as impact), it should be replaced.
9. Do not make any changes to the seat or add new components without approval from the approval authority. To ensure maximum safety for your child, the equipment should be attached and used as recommended in the instructions.
10. The plastic parts of this seat can heat up in the sun and cause burns on the child’s skin.
11. Never leave a child alone in a car seat in a vehicle.
12. Luggage and other similar items should be secured so that in a collision situation they will not cause any injury.
13. Do not use the seat without its fabric cover.
14. The cover cannot be replaced with an item from another set. It is an integral part of the set and affects the operation of the restraint.
15. Always have this instruction manual with you.
16. Refer to the vehicle manufacturer’s owner’s manual.
17. The device may not fit all approved vehicles when adjusted for a range above 135 cm.

PART DESCRIPTION

PART DESCRIPTION (FIG. B)

1. Headrest
2. Shoulder belt guide
3. Infant reduction insert
4. Protective cushions for 5-point seat belts
5. 5-point seat belts
6. Seat belt buckle
7. Seat belt tension adjustment strap
8. Seat tilt adjustment lever
9. Headrest adjustment lever
10. Lap belt guide
11. ISOFIX arms
12. ISOFIX sliding lever
13. Seat rotation button
14. Seat base
15. Seat belt tension adjustment button
16. Top Tether belt
17. Top Tether belt length adjuster
18. Top Tether belt hook

INSTALLATION IN THE CAR

REAR-FACING

REAR-FACING (40 – 105 CM)

1. Place the seat on the car’s bench seat in the space provided for installation.
2. Push in the ISOFIX sliding lever and extend the ISOFIX arms (fig. 2). Anchor the ISOFIX arms to the attachments located in the car’s bench seat. The arms will interlock and you will hear a characteristic click (fig. 3). If necessary, use the plastic guides included in the set to make installation easier (fig. 4).
3. Press the seat rotation button (13, fig. B), then move the seat to the rear-facing position (fig. 1). Try to move the seat, properly anchored will not allow you to change position.
4. Adjust the tilt of the backrest to the semi-reclining position (position “1”), (see: Seat tilt adjustment).
5. Press the seat against the backrest of the car’s bench seat. Push the base using a left-right motion toward the backrest to make sure it is pressed as tightly as possible against the car’s bench seat.
6. The green indicator on the ISOFIX button must be visible on both sides (fig. 3).
7. Unbuckle the Top Tether belt, and then slide the buckle and hook (18, fig. B) to the end of the unbuckled belt (fig. 5).
8. Guide the belt through the Top Tether belt guide, located at the top of the seat backrest (fig. 6).
9. Attach the Top Tether belt to the anchor points in the car. Anchor points can be in different locations depending on the vehicle (fig. 7a).
10. Tighten the Top Tether belt and make sure the indicator is green (fig. 8). The seat is now properly installed in the car. NOTE! When installing a rear-facing car seat, to maintain the functionality of the rotation system and not block it, route the Top Tether belt on the inside of the car.
11. Press the seat rotation button (13, fig. B), then move the seat to a lateral position, at a 90° angle. The correct setting will signal a click.
12. Place the child in the seat and adjust the headrest (see: Headrest adjustment).
13. Fasten the seat belts (see: Fastening and unfastening the child in the seat).
14. Press the seat rotation button (13, fig. B), then move the seat to the rear-facing position. Try to move the seat, properly anchored will not allow you to change position.

FORWARD FACING

FORWARD FACING (76 – 105 CM)

1. Place the seat on the car’s bench seat in the space provided for installation.
2. Push in the ISOFIX sliding lever and extend the ISOFIX arms (fig. 2). Anchor the ISOFIX arms to the attachments located in the car’s bench seat. The arms will interlock and you will hear a characteristic click (fig. 3). If necessary, use the plastic guides included in the set to make installation easier (fig. 4).
3. Press the seat rotation button (13, fig. B), then move the seat to the forward-facing position (fig. 1). Try to move the seat, properly anchored will not allow you to change position.
4. Set the seat tilt to one of the 4 available positions (see: Seat tilt adjustment).
5. Press the seat against the backrest of the car’s bench seat. Push the base using a left-right motion toward the backrest to make sure it is pressed as tightly as possible against the car’s bench seat.
6. The green indicator on the ISOFIX button must be visible on both sides (fig. 3). NOTE! Any change in the tilt of the backrest during the use of the seat requires a readjustment of the length of the Top Tether belt.
7. Unbuckle the Top Tether belt, and then slide the buckle and hook (18, fig. B) to the end of the unbuckled belt (fig. 5).
8. Guide the belt through the Top Tether belt guide, located at the top of the seat backrest (fig. 6).
9. Attach the Top Tether belt to the anchor points in the car. Anchor points can be in different locations depending on the vehicle (fig. 7b).
10. Tighten the Top Tether belt and make sure the indicator is green (fig. 8). The seat is now properly installed in the car.
11. Place the child in the seat and adjust the headrest (see: Headrest adjustment).
12. Fasten the seat belts (see: Fastening and unfastening the child in the seat).

FORWARD FACING (100 – 150 CM)

1. Remove the seat belts (see: Removal of seat belts).
2. Press the seat rotation button (13, fig. B), then move the seat to the forward-facing position (fig. 1). Try to move the seat, properly anchored will not allow you to change position.
3. Place the seat on the car’s bench seat in the space provided for installation.
4. Set the seat tilt to one of the 4 available positions (see: Seat tilt adjustment). Note! If installing without ISOFIX, skip steps 5 to 7.
5. Push in the ISOFIX sliding lever and extend the ISOFIX arms (fig. 2). Anchor the ISOFIX arms to the attachments located in the car’s bench seat. The arms will interlock and you will hear a characteristic click (fig. 3). If necessary, use the plastic guides included in the set to make installation easier (fig. 4).
6. Press the seat against the backrest of the car’s bench seat. Push the base using a left-right motion toward the backrest to make sure it is pressed as tightly as possible against the car’s bench seat.
7. The green indicator on the ISOFIX button must be visible on both sides (fig. 3).
8. Place the child in the seat and adjust the headrest (see: Headrest adjustment).
9. Pull out the seat belt (fig. 9)
10. Guide the shoulder belt through the shoulder belt guide (2, fig. B), which is located at the bottom of the seat’s headrest. Guide the lap belt through the lap belt guide (10, fig. B).
11. Fasten the seat belts (fig. 10). You will hear a characteristic click. Make sure the belts are not twisted (fig. 11A).
12. Make sure that the belts are correctly positioned in the guides and tightened, and that the buckle is not too close to the lap belt guide (fig. 11B).

FASTENING AND UNFASTENING THE SEAT BELTS

1. Loosen the seat belts by pressing the tension adjustment button and pulling on the belts (fig. 12).
2. Unfasten the belts by pressing the red button on the buckle (fig. 17).
3. Place the child in the seat.
4. Adjust the headrest (see: Headrest adjustment).
5. Connect the belt connectors (fig. 13), and then insert them into the buckle (fig. 14). You will hear a characteristic click. The seat belts are now fastened (fig. 15).
6. To tighten the belts, pull the belt tension adjustment strap (fig. 16). To loosen the belts, press the belt adjustment button and pull on the shoulder belts (fig. 12).

Note!
Make sure the seat belts are tight, fit tightly around the child’s body and are not twisted. Make sure the lap belts run low and protect the child’s pelvis. The belts should be tight against the child’s body, but should not be too tight and cause discomfort.

Note!
Children with a height of less than 87 cm can only use the seat with a reduction insert.

HEADREST ADJUSTMENT

To change the headrest height:

1. While holding the seat belt tension adjustment button, unfasten and loosen the seat belts ( fig. 12). This will allow you to adjust the height of the headrest more freely.
2. Pull the headrest adjustment lever (fig. 18).

The shoulder belt height setting is integrated with the headrest height setting. By adjusting the height of the headrest, the height of the shoulder belts will be set automatically.

Note!
The headrest should be adjusted so that the shoulder belts are not too high, such as at or above the ear line, or too low, such as behind the child’s back. Shoulder belts should be at the height of the child’s shoulders (fig. 19)

REMOVAL OF SEAT BELTS

To remove the seat belts, follow these steps:

1. While holding the seat belt tension adjustment button, loosen the belts (fig. 12).
2. Pull the headrest adjustment lever and raise the headrest (fig. 21).
3. Unzip the cover at the back of the seat (fig. 22).
4. Remove the belt loops from the metal connection plate (fig. 23) and the headrest lever (fig. 24).
5. Put the upper part of the shoulder belts through the corresponding holes in the seat back (fig. 25).
6. Unfasten the seat belts (see: Fastening and unfastening seat belts).
7. Remove the seat belt buckle from the protective cushion. Then put the metal end of the belt through the corresponding hole in the seat and remove the belt (fig. 26).
8. Place the removed seat belt components in the pocket located on the inside of the cover (fig. 27).

To reinstall the belts, follow the above steps in reverse order.

REMOVAL OF THE SEAT – ISOFIX
To detach the ISOFIX arms, push in the ISOFIX sliding levers on both sides. The indicator on the ISOFIX button will turn red.

REMOVAL OF THE SEAT – TOP TETHER
Unfasten the Top Tether belt from the anchor points in the car. Loosen the belt. The indicator will turn red.

SEAT TILT ADJUSTMENT

• To adjust the seat tilt, press the tilt adjustment lever (8, fig. B) and move the seat to the desired position.
• The seat has 4 levels of tilt adjustment in the forward-facing position (fig. 20). In the rear-facing position, place the seat in the semi-reclining position (position “1”).

SEAT ROTATION
Press the seat rotation button (13, fig. B), then adjust the seat to the rearward or forward-facing position. Try to move the seat, properly anchored will not allow you to change position.

REMOVING AND ATTACHING THE COVER

Unzip the cover and slide it completely off the seat body. To do this:

1. Adjust the headrest to the highest available position (see: Headrest adjustment).
2. Start the removal from the cover located on the headrest.
3. Remove the remaining parts of the cover.

To reattach the cover to the seat, follow the above steps in reverse order.

CLEANING AND MAINTENANCE

The cover can be hand-washed at a maximum temperature of 30°C. When drying, do not use dryers. The cover should not be exposed to sunlight for drying. The plastic parts can be cleaned with a damp cloth and mild detergent.

Note! Do not use strong detergents or bleaching agents.

Photos are for reference only, the actual appearance of the products may differ from that shown in the photos.

Warranty

Detailed warranty conditions are available on the website: www.lionelo.com.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>