lionelo LO-AMBER 3IN1 PINK 3 In 1 Pink Rose Multifunctional Stroller User Manual

Amber
Baby stroller
User manual

LO-AMBER 3IN1 PINK 3 In 1 Pink Rose Multifunctional Stroller

video manual
available on our youtube
youtube.com/lionelo

|
---|---
|
|

Dear Customer!
Should you have any remarks or questions concerning the product, please do not hesitate to contact us: help@lionelo.com

Producer:
BrandLine Group Sp. z o. o.
ul. A. Kręglewskiego 1, 61-248 Poznań, Poland

WARNINGS FOR STROLLER

IMPORTANT! READ CAREFULLY AND KEEP FOR
FUTURE REFERENCE

1. Never leave the child unattended.
2. Ensure that all the locking devices are engaged before use.
3. To avoid injury ensure that the child is kept away when unfolding and folding this product.
4. Do not let the child play with this product.
5. This seat unit is not suitable for children under 6 months.
6. Always use the restraint system.
7. Check that the pram body or seat unit or car seat attachment devices are correctly engaged before use.
8. This product is not suitable for running or skating.
9. This product is suitable for children aged at least 6 months up to 4 years and whose weight does not exceed 22 kg.
10. If you want to take the child out of the stroller or put it in, make sure the parking device is locked up.
11. The maximum load of the basket is 3 kg.
12. Any loads applied on the handle, canopy or sides of the stroller may affect its stability.
13. The product is suitable for one child only.
14. Do not use accessories which have not been approved by the manufacturer.
15. If you use special adaptors to attach the sling, which can also be used as a car seat, remember that it cannot substitute a crib. If your child needs to sleep, put it in a suitable crib.
16. Use spare parts supplied or recommended by the manufacturer/ distributor only.
17. Do not place any additional mattresses, unless it is recommended by the manufacturer.
18. Children below the age of 6 months must not be transported in a stroller in a sitting position. Children aged 0-6 months should be transported in a carrycot.
19. Keep the product away from fire and sources of heat.
20. Do not use the product on stairs.
21. The maximum tyre pressure is 35 PSI.

WARNINGS FOR CARRYCOT

IMPORTANT – Read the instructions carefully before use and keep for future reference.

1. This product is only suitable for a child who cannot sit up unaided.
2. This product is not suitable for a child who can roll over and push itself up on its hands and knees. The maximum weight of the child is 9 kg.
3. Only use on a firm, horizontal level and dry surface.
4. Do not let other children play unattended near the carrycot.
5. Do not use if any part of the carrycot is broken, torn or missing.
6. Use only spare parts supplied or recommended by the manufacturer.
7. Keep the product away from fire and sources of heat.
8. Inspect the carrycot for signs of damage and wear on a regular basis.
9. Make sure handles have been properly engaged and secured before lifting or moving the carrycot.
10. The child’s head in the carrycot must not be lower than child’s body.
11. Do not put any additional mattress inside the carrycot

List of parts (fig. A, B)

1. Handle
2. Handle height adjustment button
3. Basket
4. Footrest adjustment
5. Front rotating wheel 360’
6. Rear wheel
7. Bow| 8. Canopy
9. Carrycot canopy adjustment
10. Carrycot adapters
11. Parking device
12. Straight-ahead wheel lock button
13. Seat adjustment
---|---

HOW TO ASSEMBLE THE STROLLER

1. Take the frame and all accessories out of the box. Release the stroller lock. Unfold the frame by lifting it. If you can hear a distinctive click, it means the assembly is successful (fig. 1).
2. Slide the rear wheels shank in relevant frame holes until you can hear a click (fig. 2).
3. Slide the front wheels shank in relevant frame holes until you can hear a click (fig. 3).
4. Place the seat on the stroller frame by sliding it in the connector until you can hear a click. Next, lift he stroller to make sure it has been properly folded. Do the same when you put the seat in a rear-facing position (fig. 4, 5).
5. To fix the securing bow, slide it in frame guides until you can hear a click.
   To disassemble it, press the bow detaching key and remove the bow (fig. 6).

Assembling and disassembling safety belts

To disassemble safety belts, slide the buckle through the opening in the seat. To assemble, put the safety belts back again.

Stroller and carrycot functions

1. Seat adjustment: pull the backrest adjustment lever (fig. 7). You can choose one of three positions – from sitting to lying.
2. Fastening footcover (fig. 9). Canopy adjustment (fig. 10).
3. Safety belts adjustment: adjust the belts height to the child’s size, select 1 of 2 available variants. To adjust the safety belts, slide the belts through the openings in the seat that correspond to the child’s height.
4. Fasten safety belts with the use of a central buckle. Lengths of particular belts are adjustable (fig. 8)
5. Front rotating wheels lock: press the lock button at the front of the wheel (fig. 11).
6. Parking device: press to lock the stroller. Lift to unlock it (fig 12).
7. Press adjustment buttons on right and left side to adapt the height of the handle (fig. 13). Parent’s handle adjustment: 5-step.
8. Press both buttons (fig. 14) to adjust the seat footrest.
9. Press the button (fig. 15) to adjust the carrycot canopy.
10. Press the right and left release button (fig. 15A, 15B) to remove the carrycot from the stroller frame.
11. Press the right and left release button (fig. 16, 17) to remove the seat from the stroller frame.
12. Suitably fastened harness is presented in fig. 17A.

How to fold stroller

1. Lift the locking levers on both sides of the handle and press the locking button on the right side (fig. 18, 19).
2. It is possible to fold the stroller with seat installed in a forward-facing position.
3. After folding the frame, secure it with a lock.

How to disassemble front wheels

Press the release button (fig. 20) at the front of the stroller and remove wheels.
How to disassemble rear wheels
Press the release button (fig. 20A) at the back of the stroller and remove wheels.
The set includes stroller frame with seat and carrycot.

HOW TO ASSEMBLE CAR SEAT

(APPLIES TO 3in1 SET)
The adapters are compatible with the following products:
Lionelo (Astrid, Mari Carrier, Greet Carrier)

1. Car seat parts are presented in fig. 21.
2. Slide adapters in relevant stroller frame spots until you can hear a click and connectors are locked up. Pay attention to R and L marks.
3. Put the car seat in stroller frame until you can hear a click and adapters are locked up (fig. 22).
4. To detach the car seat when necessary, disconnect the car seat from adapters.
5. Press the button (fig. 23) to remove the connector from stroller frame.
6. A suitable assembly is presented in fig. 24.

HOW TO FOLD AND ASSEMBLE CARRYCOT

The child can be transported in the carrycot (fig. 30).

1. Carrycot parts are presented in fig. 25.
2. Put metal bars into carrycot brackets (fig. 26), as showed in fig. 26A.
3. Hide side bars by fastening Velcros (fig. 27).
4. Put the mattress base and mattress into the carrycot (fig. 28).
5. To fold the carrycot, detach Velcros covering side bars of the carrycot (fig. 29A) and pull out metal bars from carrycot brackets (fig. 29).

How to assemble carrycot on stroller

1. Slide in adapters standing out of carrycot in relevant spots on stroller frame until you can hear a click. Push the carrycot as showed by arrow in the figure (fig. 31).
2. Suitable assembly is presented in fig. 32.
3. To disassemble the carrycot, press both release buttons at a time (fig. 33) and lift the carrycot (fig. 34).

How to clean and maintain

1. To ensure the longevity of the product, it is advisable to clean the stroller frame, wheels and flexible parts with a preservative grease.
2. Remove dust and sand from the wheels and stroller frame regularly. You can clean these parts with a wet cloth and soft washing agent.
3. You should regularly check particular parts of the stroller for their functions and endurance.
4. Use only spare parts recommended by the manufacturer.
5. Avoid excessive direct exposure of the stroller to sunlight and high temperatures. Sunlight may cause fabrics to fade.
6. Clean the stroller upholstery with a soft sponge and mild detergent (e.g. soap with warm water). Make sure the fabric is utterly dry before you reuse or fold the stroller.
7. Do not use strong chemicals to clean this product.
8. The gondola cover, the mattress cover and the stroller footcover can be machine-washed at 30º

The pictures are for reference only. The real design of the products may differ from the pictures presented.

Detailed warranty conditions are available on the website:
www.lionelo.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>