IEZWAY EZ6 Foldable Electric Scooter User Manual
- June 7, 2024
- IEZWAY
Table of Contents
EZ6
User Manual
Foldable Electric Scooter
The Device& Accessories
Vehicle
Accessories
Functions
Mode Indicators
Long press the power button 3 seconds, power on. Short press the power button,
switch the speed. ECO means the Max. Speed 15km/h; D means the Max. Speed
20km/h; S means the Max. Speed 25km/h. Press twice quickly, the headlight on.
The battery power display, indicating a level of charge.If all are lit, a
battery level is 100%;
When you open our APP and press “scan for devices”, then press”Scooter”.You
will see the dashboard in your phone.
The APP has a powerful function. Easy check mileage and real-time speed. Easy
switch speed. Can choose cruise control, Boot mode, Speed unit, Headlight
setting, Vehicle self-inspection and so on.
Assembling the device
- fix the steering rod and open the parking bridge
- Set handlebars vertical;
- Using hex wrench in the packing box to tighten the screws on the handlebar
- Testing the power switch after finish assembling
Power Button
Press the power button to turn on the vehicle. Press and hold a button for 2
seconds to turn on the device. When switched on : press the power button to
turn on/off a flashlight; press a power button twice to normal mode and
power-saving mode.
Charging scooter
Open the cover, connect the charger, close the cover
Learning driving
Please wear a helmet and knee pads when practicing
- Power on and check the battery led light
- Stand on the pedal with one leg, hit the ground with the other leg
- Step on the other leg when the scooter is moving, then press the accelerate button (only accelerate when the scooter speed is beyond 5km/h)
- lose the accelerate button when slowing down. Energy recovery systems will open themselves to slow down. Press the left disc brake tightly if want to brake urgently. ]
- lean your body left slightly to turn left, lean your body right slightly to turn right. And turn the handlebar slowly.
Safety Instructions
It is not recommended to drive on the rain
It is recommended to slightly bend knees to better adjust to a rough road.If you are traveling on a rough road, stick to low speed (5-10km/h)
Entering into any room, elevator, etc. Be careful not be injured by a door frame.
Please not add speed when descending a hill
While walking with a scooter, do not press a speed knob
When driving it is recommended to go around various obstacles on a road
Please do not hang backpacks and other heavy objects on handlebars ground
When driving is forbidden to place one foot on the running board or on the
Preventing dangerous driving
It is forbidden to leave a scooter on a scooter wheel at high roadway for motor vehicles or ride in at a high speed
It is forbidden to sharply turn a residential area with a large flow of passers- by
It is forbidden to drive through puddles, to which exceeds the depth of 2cm.
Never rider a scooter more than or one person, hold a child in your arms.
Do not tread the back of the fender
Do not touch the disc brake
Do not drive leaving your hands
Do not ride an electric scooter up, down steps or jump over obstacles
Safety Recommendations
- Electric scooter – it is only a device for entertainment, not a vehicle.But once you driving to the public area, the electric scooter brings certian risks for your safety. For the sake of your safety and others’ safety, you must strictly follow the instructions, outlined in this driving manual.
- You should understand that is you ride a scooter in a public place, you must comply with all recommendations for safety. Also do not forget that there is a possibility of collision, due to violation of pedestrians or vehicles traffic rules, there is also a risk of injury, due to improper operation of the unit. As in other types of vehicles, the higher the speed of the electric scooter, the greater the braking distance. On some smooth roads, emergency braking may cause skidding of the scooter, loss of balance, and even fall. Therefore, during moving of scooter, you need to be vigilant, adhere to an appropriate speed, keep a safe distance from pedestrians and/or with other vehicles. Riding on unfamiliar terrain, keep vigilance and appropriate speed.
- While riding a scooter, respect the rights of pedestrians. Do not scare them, especially children. Reduce speed, passing by them.If you are moving in the same direction with pedestrians, try to stick to the left side as much as possible(for right-hand traffic countries ).If you are moving in the opposite direction, stick to the right, and slow down.
- Please strictly following your country’s road rules to driving, and also strictly abide by rules, set out in the instructions and safety recommendations. Violation of the above rules may result in financial expenses, personal injury, the occurrence of traffic accidents, legal disputes, conflict and other unpleasant situations. Our company does not bear any direct or joint and several liabilities.
- o avoid personal injury, do not loan electric scooters to others who do not know how to drive. Please spend a training before you transfer your scooter to friends, as well as teach he(her)must be wearing the proper safety gear.
- Please do inspect the scooter carefully before each use.If you find shattered parts, battery life has decreased obviously, tires leak air or there are signs of excessive wear, uncharacteristic sounds when turning or other abnormal symptoms, please discontinue use of the scooter immediately, don’t drive it reluctantly.
Fold and Transportation
Make sure the scooter be off, hold the front pole, loosen a lock lever and
lower a steering rack. Adding a steering rack in a horizontal position and
secure it by inserting a hook through a special ring, which is located on the
rear wheel mudguard. To Assemble the scooter, disconnect a steering rack lock
from a hook of a mudguard, and then lift it into a vertical position and lock
a lever .
Transportation
You can transfer folded scooter with one hand
Care and Storage
Clean and store Electric Scooter
If you find any stains on electric scooter housing, use a soft, damp cloth to
wipe the vehicle; You can use toothpaste and a toothbrush to clean the scooter
from stains, and then wipe it clean with a damp cloth. If you find scratched
on parts, made of plastic, use sandpaper or other grinding materials for their
polishing .
Warning: Do not use alcohol, petrol, kerosene or other corrosive solutions,
volatile chemical solvents to clean the vehicle. Otherwise,it will cause
serious damage to the scooter body and can disrupt the structure of internal
elements. Do not wash the electric scooter under strong pressure of the water,
make sure the scooter in the off status. In addition, after charging of the
vehicle, it is necessary to insert a plug back to a charging connector,
otherwise, you may get an electric shock , or may have serious water damage
cause by water falling into this hole which may have serious water damage.
If you do not use the scooter, store it in a dry, cool place, and do not leave
the unit for a long time on the street. Leaving the device under the sun/in
extremely high temperature/over-low temperature can cause rapid aging of an
outer body and wheels of an Electric Scooter or reduce battery life.
Maintenance of Electric Scooter battery
- Do not use batteries from other brands in order to avoid a dangerous situation;
- Do not open or disassemble the battery to prevent electric shock. Avoid contact with metal objects to prevent an occurrence of a short circuit. Otherwise,the battery may have malfunctioned or can injure the user;
- It is recommended to use an AC adapter, that comes in the original configuration of the device,to prevent an occurrence of an accident or fire of the vehicle;
- Improper disposal of used batteries and accumulators is the cause of severe environmental pollution. Please, dispose of batteries in accordance with local laws. Please do not dispose of batteries together with food waste. Protecting the environment together!
- After each use of the device, charge the battery to prolong its service life.
Do not store the scooter battery in rooms with temperatures, that exceed
50℃or-20℃(for example,do not leave the battery of Electric Scooter and other
batteries in cars in the summertime on the hot sun), do not leave the battery
near the fire. As a result of these actions may deteriorate the battery,
overheating and can even cause inflammation. If within 30 days the scooter is
not used, charge the battery and keep the device in a cool, dry place. Every
60 days you need to charge the battery, otherwise, there is the likelihood of
its failure, which is not subject to warranty services. Avoid a full discharge
of the device,it will to extend battery life. When using the device at normal
room temperature,the battery will be able to ride a much greater distance and
its performance will be better, but if you use the scooter at temperatures
below 0C, vehicle performance, and permeability decrease.
At-20C a traveled distance is less, than the scooter in the normal conditions
of half or even less.If a temperature rises, the traveled distance by the
vehicle will also increase. You can check the remaining distance in the
Application. Note: A fully charged scooter runs about 120-180 days of standby
time. The battery has a smart chip,that stores information about its charging-
discharging.If you are not charging the battery for a long time,it can cause
serious damage,for which it is impossible to charge the device again. This
kind of damage is not included in the free warranty service.(Caution: Do not
disassemble the device by unauthorized people,as there is a risk of electric
shock or serious injury as a result of a short circuit.
Adjusting a brake disc
If a brake is very tight: using the M5 hex wrench and scroll counterclockwise
screws of brake disc tensioner pulley, slightly shorten a length of a tail
brake cable,then tighten a tensioner pulley.If you think that brake is very
free, loosen a tension pulley, pull a brake cable to slightly increase the
length of its tail. Tighten a tension pulley.
Adjusting handlebars
Staggering of steering rack: using an M5 hex wrench, tighten two screws near
the folding mechanism.
Parameters
Operating parameters | Name | EZ6 parameters |
---|---|---|
Dimensions | Length x Width x Height[1] (cm) | 106 x 42 x 48 |
Folded: Length x
Width x Height(cm)
| 106 x 42 x48
weight| Gross weight| 12kg
Conditions| Max load| 120
Age| 16-50
Height(cm)| 120-200
Main Parameters| Max speed(km/h)| 25
Possibility in average condition [2] (km)| 25-35
Maximum slope(%)| 30
Suitable area| Solid road surface, smooth clay surface to overtime, obstacles
high less than lcm,a depth of pools no more than 2cm
Operating temperature range(°C)| -10-40
The temperature of storage(°C)| -20-45
Waterproof level|
Battery Parameters| Rated voltages(VDC)| 36B
Max voltage of
charging(VDC)
| 428
| Rated power(Wh)| 280-378
---|---|---
Smart battery management system| Stress, insufficient voltage, short circuit,
auto sleep/wake up, overheating protection, control of battery using
Motor Parameters| Rated power(W)| 3S0| Max
power(w)| 350| Max
power adaptor
parameters
| Rated power(W)| 71|
Rated input
voltage(VAC)
| 100-24013|
Rated output
voltage(VDC)
| 42V|
Rated current(A)| 1.5A|
Certificate| CE,RoH,UL|
Charging time(h)| Est . 3.5|
Presence of toxic and harmful substances
Name | Toxic and harmful substances elements |
---|---|
Pb | Hg |
Power adaptor | X |
Battery | X |
Connect ng pipe | X |
Charging Port | X |
Indicators | X |
Circuit board | X |
Motor | X |
Housing | X |
The date is provided in accordance with provisions of SJ/T 11364.
0:toxic and harmful substances in all components of the device are contained in an amount below the limit value, according to standard GB/T 26572-2011. X: the presence of toxic and hazardous substances at least one of components of the device in an amount, that exceeds the threshold, according to getting/T 26572-2011
Warranty
Warranty service is carried out in accordance with the law on 《consumer
rights》 and the 《Law on the quality of products.》The warranty service
includes:
Recommendation: use the packaging for safe transport of the device.We
recommend keeping the original packaging within 15 days after receipt of
goods.
II.Warranty terms
Name | Information on warranty maintenance | Term |
---|---|---|
Main Unit | Frame,hub motor, controller, steering wheel, handlebar, control |
panel, rear hub, brakes, disc brakes (folding) system, fork, front fork
governance system bus control.brake cable| I year
Accessories| Battery, power supply, brake level, switching gears| 6 months
Exterior parts, that easily wear out| Anti-collision strip, headlights,
instrument cover, handle sets, tires, inner tubes, bell, fender, taillights,
decorative cover, stand, battery compartment cover, footpad. charging port,
rubber stopper| 3 months
Caution: Hex wrench, connecting pipe and other consumable component parts have no warranty.
III. Non – warranty regulations
1. Authorized maintenance, misuse, collision, negligence, abuse, intake,
accident.
Improper use of non-product accessories, or tear up the modified label, anti-
counterfeit mark.
2. The warranty period has expired;
3. Damage, caused by force majeure;
4. Failures, which do not correspond to the 《List of faults》of EcoRider
service center;
5. A failure of the device or its components from the 《Fault list》, which
arose in connection with the human factor, and which interfere with normal
operation.
6. Failures, that have arisen in connection with the human factors
(including, but not limited to, excessive wetting device, puncture, drop,
scratch, and damage the outer casing, which have arisen as a result of the
normal use of goods)
7.If this product is used for commercial purposes, all warranty conditions are
not maintained.
IV. List of faults
Name of fault
Electric Scooter| Incorrect motor operation
Problems with the operation of the controller
Problems with charger
Problems with battery
In use,the occurrence of cracks, deformation, etc
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>