KENWOOD KDC-230UI CD Receiver Instruction Manual

: June 6, 2024
: KENWOOD

Table of Contents

KDC-230UI CD Receiver
FM+/*AM ) BAND 2
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

KDC-230UI CD Receiver

KDC-230UI KDC-1040U
CD-RECEIVER
INSTRUCTION MANUAL

KDC-154UM KDC-130U

B5A-2597-10 (MN/M2N)

CONTENTS

BEFORE USE

2

BASICS

3

GETTING STARTED

4

1 Select the display language and cancel the demonstration
2 Set the clock and date

3 Set the initial settings

RADIO

6

CD/USB/iPod/ANDROID

8

AUX

10

AUDIO SETTINGS

11

DISPLAY SETTINGS

13

REFERENCES

14

Maintenance More information

TROUBLESHOOTING

16

INSTALLATION/

CONNECTION

17

SPECIFICATIONS

20

2 ENGLISH

BEFORE USE

IMPORTANT · To ensure proper use, please read through this manual before using this product. It is especially important that you read and observe Warnings
and Cautions in this manual. · Please keep the manual in a safe and accessible place for future reference.
WARNING · Do not operate any function that takes your attention away from safe driving. · Do not ingest the battery, Chemical Burn Hazard.
The remote control supplied with this product contains a coin/button cell battery. If the coin/button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death. Keep new and used batteries away from children. If the battery compartment does not close securely, stop using the product and keep it away from children. If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.
Caution Volume setting: · Adjust the volume so that you can hear sounds outside the car to prevent accidents. · Lower the volume before playing digital sources to avoid damaging the speakers by the sudden increase of the output level.
General: · Avoid using the external device if it might hinder safe driving. · Make sure all important data has been backed up. We shall bear no responsibility for any loss of recorded data. · Never put or leave any metallic objects (such as coins or metal tools) inside the unit to prevent a short circuit. · If a disc error occurs due to condensation on the laser lens, eject the disc and wait for the moisture to evaporate. · USB rating is indicated on the main unit. To view, detach the faceplate. (Page 3) · Depending on the types of cars, the antenna will automatically extend when you turn on the unit with the antenna control wire connected
(page 19). Turn off the unit or change the source to STANDBY when parking at a low ceiling area.
Remote control (RC-406): · Do not leave the remote control in hot places such as on the dashboard. · The Lithium battery is in danger of explosion if replaced incorrectly. Replace it only with the same or equivalent type. · The battery pack or batteries shall not be exposed to excessive heat such as sunshine, fire or the like.

How to read this manual

· Operations are explained mainly using buttons on the faceplate of

.

· English indications are used for the purpose of explanation. You can select the display language from the [FUNCTION] menu. (Page 5)

· [XX] indicates the selected items.

· (Page XX) indicates references are available on the stated page.

BASICS
Faceplate

Volume Loading knob slot

Display window

Remote control (RC-406)
Remote sensor (Do not expose to bright sunlight.)

Attach

Detach button Detach

Not used

How to reset

Your preset adjustments will be erased except stored radio stations.

How to replace the battery

Pull out the insulation sheet when using for the first time.

To Turn on the power Adjust the volume
Select a source Change the display information

On the faceplate Press BSRC. · Press and hold to turn off the power. Turn the volume knob.
Press BSRC repeatedly. Press DISP repeatedly. (Page 15)

On the remote control Press and hold SRC to turn off the power. ( Pressing SRC does not turn on the power. ) Press VOL or VOL . · Press and hold VOL to continuously increase the volume to 15. Press ATT during playback to attenuate the sound. · Press again to cancel. Press SRC repeatedly. ( Not available )
ENGLISH 3

GETTING STARTED

1 Select the display language and cancel the demonstration

When you turn on the power (or after you reset the unit), the display shows: “SEL LANGUAGE” “PRESS” “VOLUME KNOB”

1 Turn the volume knob to select the display language, then press the

knob.

Selectable display language:

/

: [ENG] (English) or [TUR] (Turkish)

: [EN] (English), [RU] (Russian), [TU] (Turkish) or [SP] (Spanish)

[ENG]/[EN] is selected for the initial setup.

Then, the display shows: “CANCEL DEMO” “PRESS” “VOLUME KNOB”.

2 Press the volume knob again.

[YES] is selected for the initial setup.

3 Press the volume knob again.

“DEMO OFF” appears.

2 Set the clock and date
1 Press the volume knob to enter [FUNCTION]. 2 Turn the volume knob to select [CLOCK], then press the knob.
To adjust the clock 3 Turn the volume knob to select [CLOCK ADJUST], then press the knob. 4 Turn the volume knob to make the settings, then press the knob.
Hour Minute

5 Turn the volume knob to select [CLOCK FORMAT], then press the knob. 6 Turn the volume knob to select [12H] or [24H], then press the knob.

To set the date 7 Turn the volume knob to select [DATE FORMAT], then press the knob. 8 Turn the volume knob to select [DD/MM/YY] or [MM/DD/YY], then press
the knob. 9 Turn the volume knob to select [DATE SET], then press the knob. 10 Turn the volume knob to make the settings, then press the knob.
Day Month Year or Month Day Year

11 Press and hold

to exit.

To return to the previous setting item, press

.

3 Set the initial settings

1 Press BSRC repeatedly to enter STANDBY.

2 Press the volume knob to enter [FUNCTION].

· Pressing AUD enters [AUDIO CONTROL] directly.

3 Turn the volume knob to select an item (see the following table), then

press the knob.

4 Repeat step 3 until the desired item is selected or activated.

5 Press and hold

to exit.

To return to the previous setting item, press

.

[AUDIO CONTROL] [SWITCH PREOUT] [SP SELECT]

Default: [XX] [REAR]/[SUB-W]: Selects whether rear speakers or a subwoofer are connected to the line out terminals on the rear (through an external amplifier). (Page 19) [OFF]/5/4/6×9/6/OEM: Selects according to the speaker size (5 inches or 4 inches, 6×9 inches or 6 inches) or OEM speakers for optimum performance.

4 ENGLISH

GETTING STARTED

[DISPLAY] [EASY MENU] [TUNER SETTING] [PRESET TYPE] [SYSTEM] [KEY BEEP] [TDF ALARM] [SOURCE SELECT] [BUILT-IN AUX] [P-OFF WAIT] [CD READ]

(For

/

)

When entering [FUNCTION]…

[ON]: [ZONE 1] illumination changes to white color. ; [OFF]: [ZONE 1] illumination remains as [COLOR SELECT] color.

(Page 13)

· [ZONE 2] illumination changes to light blue color when you enter

[FUNCTION], irregardless of the [EASY MENU] setting.

· Refer to the illustration on page 13 for zone identification.

[NORMAL]: Memorizes one station for each preset button in each band (page 6). ; [MIX]: Memorizes one station for each preset button,
regardless of the selected band. [ON]: Activates the keypress tone. ; [OFF]: Deactivates.

(For

/

)

[ON]: Activates the alarm if you forget to detach the faceplate when ACC is set to

OFF. ; [OFF]: Deactivates.

(For

)

Applicable only when the demonstration mode is turned off.

Sets the duration when the unit will automatically turn off (while in

standby mode) to save the battery.

[1]: Automatically distinguishes between audio file disc and music CD. ; [2]: Forces to play as a music CD. No sound can be heard if an audio file
disc is played. [F/W UPDATE] [UPDATE SYSTEM] [F/W UP xxxx] [YES]: Starts upgrading the firmware. ; [NO]: Cancels (upgrading is not activated). For details on how to update the firmware, visit <www.kenwood.com/cs/ce/>. [CLOCK] [CLOCK DISPLAY] [ON]: The clock time is shown on the display even when the unit is turned off. ; [OFF]: Cancels. [ENGLISH] []* [TURKCE]

Select the display language for [FUNCTION] menu and music
information if applicable. By default, [ENGLISH] is selected.

[ESPANOL]*

Selectable only for

.

ENGLISH 5

RADIO

· To cancel, press or DIRECT. · If no operation is done for 10 seconds after step 2, Direct Access Tuning is
automatically canceled.

Selectable band:

/

: FM1/FM2/FM3/AM

: FM1/FM2/FM3/AM/SW1/SW2

· “ST” lights up when receiving an FM stereo broadcast with sufficient signal strength.
· The unit switches to FM alarm automatically when receiving an alarm signal from FM broadcast.

Search for a station
1 Press BSRC repeatedly to select RADIO.
2 Press BAND repeatedly (or press #FM+/*AM on the remote control)
to select the band. 3 Press S / T (or press S / T (+) on the remote control) to
search for a station.
You can store up to 18 stations for FM and 6 stations for AM/SW1/SW2. · To store a station: Press and hold one of the number buttons (1 to 6). · To select a stored station: Press one of the number buttons (1 to 6) (or
press one of the number buttons (1 to 6) on the remote control).

Direct Access Tuning (using the remote control)
1 Press DIRECT to enter Direct Access Tuning. 2 Press the number buttons to enter a station frequency. 3 Press ENT IW to search for a station.

Other settings

1 Press the volume knob to enter [FUNCTION].

2 Turn the volume knob to select an item (see the following table), then

press the knob.

3 Repeat step 2 until the desired item is selected/activated or follow the

instructions stated on the selected item.

4 Press and hold

to exit.

To return to the previous setting item, press

.

Default: [XX] [TUNER SETTING] [SEEK MODE] [LOCAL SEEK]*1 [AUTO MEMORY] [MONO SET]

Selects the searching method for S / T buttons when pressed. [AUTO1]: Automatically search for a station. ; [AUTO2]: Search for a preset station. ; [MANUAL]: Manually search for a station.
[ON]: Searches only stations with good reception. ; [OFF]: Cancels. · Settings made are applicable only to the selected source/station. Once
you change the source/station, you need to make the settings again.
[YES]: Automatically starts memorizing 6 stations with good reception. ; [NO]: Cancels. · Selectable only if [NORMAL] is selected for [PRESET TYPE]. (Page 5)
[ON]: Improves the FM reception, but the stereo effect will be lost. ; [OFF]: Cancels.

*1

/

: AM/SW1/SW2 stations only.

: FM stations only.

6 ENGLISH

RADIO

[NEWS SET] [ON]: The unit will temporarily switch to News Programme if available. ; [OFF]: Cancels. [REGIONAL]2 [AF SET]2 [ON]: Switches to another station only in the specific region using the “AF” control. ; [OFF]: Cancels.
[ON]: Automatically searches for another station broadcasting the same program in the same Radio Data System network with better reception when the current reception is poor. ; [OFF]: Cancels. [TI] [PTY SEARCH] [CLOCK] [ON]: Allows the unit to temporarily switch to Traffic Information if available (“TI” lights up). ; [OFF]: Cancels.
1 Turn the volume knob to select the available Program Type (see the right column), then press the knob.
2 Turn the volume knob to select the PTY language ([ENGLISH]/ [FRENCH]/[GERMAN]), then press the knob.
3 Press S / T to start searching. [TIME SYNC] [ON]: Synchronizes the unit’s time to the Radio Data System station time. ; [OFF]: Cancels.

*2

/

: Default: [OFF].

: Default: [ON].

· [MONO SET]/[NEWS SET]/[REGIONAL]/[AF SET]/[TI]/[PTY SEARCH] is selectable only when the band is FM1/FM2/FM3.
· If the volume is adjusted during reception of traffic information, alarm or news bulletin, the adjusted volume is memorized automatically. It will be applied the next time traffic information, alarm or news bulletin is turned on.

Available Program Type for [PTY SEARCH] [SPEECH]: [MUSIC]:

[NEWS], [AFFAIRS], [INFO] (information), [SPORT], [EDUCATE], [DRAMA], [CULTURE], [SCIENCE], [VARIED], [WEATHER], [FINANCE], [CHILDREN], [SOCIAL], [RELIGION], [PHONE IN], [TRAVEL], [LEISURE], [DOCUMENT] [POP M] (music), [ROCK M] (music), [EASY M] (music), [LIGHT M] (music), [CLASSICS], [OTHER M] (music), [JAZZ], [COUNTRY], [NATION M] (music), [OLDIES], [FOLK M] (music)

The unit will search for the Program Type categorized under [SPEECH] or [MUSIC] if selected.

ENGLISH 7

CD/USB/iPod/ANDROID

Start playback

The source changes automatically and playback starts.

CD

Eject disc

Label side

USB input terminal USB
CA-U1EX (max.: 500 mA) (optional accessory) iPod/iPhone
KCA-iP102/KCA-iP103 (optional accessory)1 or accessory of the iPod/iPhone2
ANDROID3
USB cable2 (commercially available)

Selectable source:

:

CD/USB/iPod USB/ANDROID

/

:

CD/USB/ANDROID

To Play back/pause Reverse/Fast-forward4 Select a track/file Select a folder5 Repeat play46
Random play46

On the faceplate

On the remote control

Press 6 IW.

Press ENT IW.

Press and hold S / T.

Press and hold S / T (+).

Press S / T.

Press S / T (+).

Press 2 / 1 .

Press #FM+/ AM.

Press 4 repeatedly.

[TRACK REPEAT]/[ALL REPEAT]

: Audio CD

[FILE REPEAT]/[FOLDER REPEAT]/[ALL REPEAT] : MP3/WMA/WAV/FLAC file [FILE REPEAT]/[FOLDER REPEAT]/[REPEAT OFF] : iPod

Press 3 repeatedly.

[DISC RANDOM]/[RANDOM OFF] : Audio CD [FOLDER RANDOM]/[RANDOM OFF] : MP3/WMA/WAV/FLAC file or iPod

Press and hold 3 to select [ALL RANDOM].*7

1 KCA-iP102: 30-pin type, KCA-iP103: Lightning type 2 Do not leave the cable inside the car when not used. 3 You can control Android device using the Android device itself via other media player application installed in the Android
device. 4 Not applicable for ANDROID. 5 For CD: Only for MP3/WMA files. This does not work for iPod/ANDROID. 6 For iPod: Applicable only when [MODE OFF] is selected. (Page 9) *7 For CD: Only for MP3/WMA files.

8 ENGLISH

CD/USB/iPod/ANDROID

Select music drive
While in USB source, press 5 repeatedly. Stored songs in the following drive will be played back. · Selected internal or external memory of a smartphone (Mass Storage
Class). · Selected drive of a multiple drive device.
Listen to TuneIn Radio/TuneIn Radio Pro
While listening to TuneIn Radio or TuneIn Radio Pro, connect the iPod/ iPhone to the USB input terminal of the unit. · The unit will output the sound from these applications.
Select control mode
While in iPod USB source, press 5 repeatedly. [MODE ON]: Control iPod using the iPod itself. However, you can still perform
play/pause, file skip, fast-forward or fast-reverse from this unit. [MODE OFF]: Control iPod from this unit.
Direct Music Search (using the remote control)
1 Press DIRECT. 2 Press the number buttons to enter a track/file number. 3 Press ENT IW to search for music. · To cancel, press or DIRECT. · Not available if Random Play is selected. · Not applicable for iPod USB and ANDROID source.

Select a file from a folder/list

For iPod, applicable only when [MODE OFF] is selected.

1 Press

.

2 Turn the volume knob to select a folder/list, then press the knob.

3 Turn the volume knob to select a file, then press the knob.

Quick search (applicable only for CD and USB source) If you have many files, you can search through them quickly.
Turn the volume knob quickly to browse through the list quickly.
Skip search (applicable only for iPod USB source) Press S / T to search at a preset skip search ratio. (Page 10) · Pressing and holding S / T searches at a 10% ratio.
Alphabet search (applicable only for iPod USB source) You can search for a file according to the first character.
1 Turn the volume knob quickly to enter character search. 2 Turn the volume knob to select the character.

· Select ” ” to search for a character other than A to Z, 0 to 9.
3 Press S / T to move to the entry position. · You can enter up to 3 characters.
4 Press the volume knob to start searching.

· To return to the root folder/first file/top menu, press 5.

· To return to the previous setting item, press

.

· To cancel, press and hold

.

ENGLISH 9

CD/USB/iPod/ANDROID

AUX

Other settings

1 Press the volume knob to enter [FUNCTION].

2 Turn the volume knob to select an item (see the following table), then

press the knob.

3 Repeat step 2 until the desired item is selected or activated.

4 Press and hold

to exit.

To return to the previous setting item, press

.

Preparation: · Select [ON] for [BUILT-IN AUX] in [SOURCE SELECT]. (Page 5)

Start listening

1 Connect a portable audio player (commercially available).

Auxiliary input jack

Portable audio player

[USB] [MUSIC DRIVE] [SKIP SEARCH]

Default: [XX] [DRIVE CHANGE]: The next drive ([DRIVE 1] to [DRIVE 5]) is selected automatically and playback starts. Repeat steps 1 to 3 to select the following drives.

(For

)

[0.5%]/[1%]/[5%]/[10%]: While listening to iPod USB source, selects the

skip search ratio over the total files.

3.5 mm stereo mini plug with “L” shaped connector (commercially available)
2 Press B SRC repeatedly to select AUX. 3 Turn on the portable audio player and start playback.

Set the AUX name

While listening to a portable audio player connected to the unit…

1 Press the volume knob to enter [FUNCTION].

2 Turn the volume knob to select [SYSTEM], then press the knob.

3 Turn the volume knob to select [AUX NAME SET], then press the knob.

4 Turn the volume knob to select an item, then press the knob.

[AUX] (default)/[DVD]/[PORTABLE]/[GAME]/[VIDEO]/[TV]

5 Press and hold

to exit.

To return to the previous setting item, press

.

10 ENGLISH

AUDIO SETTINGS

Select the equalizer (only for

)

Press repeatedly to select a preset equalizer (which is suitable to the music genre) directly.
Preset equalizer: [DRIVE EQ]/[TOP40]/[POWERFUL]/[ROCK]/[POPS]/[EASY]/[JAZZ]/ [NATURAL]/[USER] · Select [USER] to use the settings made in [EQ PRO]. · [DRIVE EQ] is a preset equalizer that reduces noise outside the car or
running noise of the tyres.

Other settings

1 Press AUD to enter [AUDIO CONTROL] directly.

2 Turn the volume knob to select an item (see the following table),

then press the knob.

3 Repeat step 2 until the desired item is selected or activated.

4 Press and hold

to exit.

(or using the remote control) 1 Press AUD to enter [AUDIO CONTROL]. 2 Press J/K to select an item, then press ENT IW.

To return to the previous setting item, press

.

Default: [XX] [AUDIO CONTROL] [SUB-W LEVEL] [15] to [+15] ([0]) Adjusts the subwoofer output level.

[BASS LEVEL] [MID LEVEL] [TRE LEVEL] [8] to [+8] [8] to [+8] [8] to [+8]

Adjusts the level to memorize for each source.

(Before making an adjustment, select the source you want

to adjust.)

Default:

/

: [+2]/

[+1]/[+1]

: [+8]/[+2]/[+3] [EQ PRO]

Adjusts your own sound settings for each source. · The settings are stored to [USER] in [PRESET EQ].

[BASS ADJUST] [BASS CTR FRQ] [BASS LEVEL] [60]/[80]/[100]/[200]: Selects the center frequency. [8] to [+8]: Adjusts the level. [BASS Q FACTOR] [1.00]/[1.25]/[1.50]/[2.00]: Adjusts the quality factor. [BASS EXTEND] [ON]: Turns on the extended bass. ; [OFF]: Cancels.

Default:

/

: [100]/[+2]/[1.00]/[OFF]

: [100]/[+8]/[1.00]/[ON] [MID ADJUST] [MID CTR FRQ] [0.5KHZ]/[1.0KHZ]/[1.5KHZ]/[2.5KHZ]: Selects the center frequency.

[MID LEVEL] [8] to [+8]: Adjusts the level. [MID Q FACTOR] [0.75]/[1.00]/[1.25]: Adjusts the quality factor.

Default:

/

: [2.5KHZ]/[+2]/[1.00]

: [1.0KHZ]/[+1]/[1.00]

ENGLISH 11

AUDIO SETTINGS

the center frequency. [TRE LEVEL] [8] to [+8]: Adjusts the level.

Default:

/

: [+3]

: [+1] [PRESET EQ] [DRIVE EQ]/[TOP40]/[POWERFUL]/[ROCK]/[POPS]/[EASY]/[JAZZ]/

[NATURAL]/[USER]: Selects a preset equalizer suitable to the music genre.

· Select [USER] to use the settings made in [EQ PRO].

Default:

/

: [USER]

: [POWERFUL] [BASS BOOST] [LV1]/[LV2]/[LV3]: Selects your preferred bass boost level. ; [OFF]: Cancels.

[LOUDNESS] [LV1]/[LV2]: Selects your preferred low or high frequencies boost to produce a well-balanced sound at low volume. ; [OFF]: Cancels. [SUBWOOFER SET] [ON]: Turns on the subwoofer output. ; [OFF]: Cancels. [LPF SUBWOOFER] [THROUGH]: All signals are sent to the subwoofer. ; [85HZ]/[120HZ]/ [160HZ]: Audio signals with frequencies lower than 85 Hz/120 Hz/160 Hz are
sent to the subwoofer. [SUB-W PHASE] [REVERSE] (180°)/[NORMAL] (0°): Selects the phase of the subwoofer output
to be in line with the speaker output for optimum performance. · Selectable only if a setting other than [THROUGH] is selected for [LPF
SUBWOOFER]. [FADER] [R15] to [F15] ([0]): Adjusts the front and rear speaker output balance. [BALANCE] [L15] to [R15] ([0]): Adjusts the left and right speaker output balance. [VOLUME OFFSET] For AUX: [8] to [+8] ([0]) ; For other sources: [8] to [0]: Presets the initial volume level of each source. (Before adjustment, select the source you want to adjust.) [SOUND RECNSTR] [ON]: Creates realistic sound by compensating the high-frequency

(Sound

components and restoring the rise-time of the waveform that are lost

reconstruction) in audio data compression. ; [OFF]: Cancels.

· [SUB-W LEVEL]/[SUBWOOFER SET]/[LPF SUBWOOFER]/[SUB-W PHASE] is selectable only if [SWITCH PREOUT] is set to [SUB-W]. (Page 4)
· [SUB-W LEVEL]/[LPF SUBWOOFER]/[SUB-W PHASE] is selectable only if [SUBWOOFER SET] is set to [ON].

12 ENGLISH

DISPLAY SETTINGS

/

and brightness settings

: Zone identification for color settings

[DISPLAY] [COLOR SELECT]

Default: [XX]

(For

/

)

Selects illumination colors for [ALL ZONE], [ZONE 1] and [ZONE 2]

separately.

1 Select a zone ([ZONE 1], [ZONE 2], [ALL ZONE]). (See the illustration on

left column.)

2 Select a preset color for the selected zone.

· Press COL changes the illumination color (preset colors) of the last selected zone. By default, [ALL ZONE] is selected.
· Press and hold COL enters [COLOR SELECT] directly.
: Zone identification for brightness setting

[DIMMER]

To make your own color, select [CUSTOM R/G/B]. The color you have made will be stored in [CUSTOM R/G/B]. 1 Press the volume knob to enter the detailed color adjustment. 2 Press S/T to select the color ([R]/[G]/[B]) to adjust. 3 Turn the volume knob to adjust the level ([0] to [9]), then press the knob.
Dims the illumination. [ON]: Dimmer is turned on. [OFF]: Dimmer is turned off. [DIMMER TIME]: Set the dimmer on and off time. 1 Turn the volume knob to adjust the [ON] time, then press the knob. 2 Turn the volume knob to adjust the [OFF] time, then press the knob.
Default: [ON]: [6:00PM] or [18:00] ; [OFF]: [6:00AM] or [6:00]

1 Press the volume knob to enter [FUNCTION].

2 Turn the volume knob to select an item (see the right column), then

press the knob.

3 Repeat step 2 until the desired item is selected/activated or follow the

instructions stated on the selected item.

4 Press and hold

to exit.

To return to the previous setting item, press

.

[BRIGHTNESS] 1 Select a zone. (See the illustration on left column.) 2 [LVL 00] to [LVL 31]: Set the brightness level for the selected zone.

scrolling at 5-second intervals. ; [OFF]: Cancels.
Preset color: [INITIAL COLOR]/[VARIABLE SCAN]/[CUSTOM R/G/B]/[RED1]/[RED2]/[RED3]/[PURPLE1]/ [PURPLE2]/[PURPLE3]/[PURPLE4]/[BLUE1]/[BLUE2]/[BLUE3]/[SKYBLUE1]/[SKYBLUE2]/ [LIGHTBLUE]/[AQUA1]/[AQUA2]/[GREEN1]/[GREEN2]/[GREEN3]/[YELLOWGREEN1]/ [YELLOWGREEN2]/[YELLOW]/[ORANGE1]/[ORANGE2]/[ORANGERED]

ENGLISH 13

REFERENCES

Maintenance Cleaning the unit
Wipe off dirt on the faceplate with a dry silicone or soft cloth.

Cleaning the connector

Detach the faceplate and clean the connector gently with a cotton swab. Be careful not to damage the connector.
Handling discs

Connector (on the reverse side of the faceplate)

· Do not touch the recording surface of the disc. · Do not stick tape etc. on the disc, or use a disc with tape stuck on it. · Do not use any accessories for the disc. · Clean from the center of the disc and move outward. · Clean the disc with a dry silicone or soft cloth. Do not use any solvents. · When removing a disc from this unit, pull it out horizontally. · Remove burrs from the center hole and disc edge before inserting a disc.

More information For: Latest firmware updates and latest compatible item list
Any other latest information Visit <www.kenwood.com/cs/ce/>.
General · This unit can only play the following CDs:

· For detailed information and notes about the playable audio files, visit <www.kenwood.com/cs/ce/audiofile/>.

Playable files · Playable audio file:
For disc: MP3 (.mp3), WMA (.wma) For USB mass storage class device:
MP3 (.mp3), WMA (.wma), WAV (.wav), FLAC (.flac) · Playable disc media: CD-R /CD-RW/CD-ROM · Playable disc file format: ISO 9660 Level 1/2, Joliet, Long file name · Playable USB device file system: FAT12, FAT16, FAT32
Even when audio files comply with the standards listed above, playback may be impossible depending on the types or conditions of media or devices.
Unplayable discs · Discs that are not round. · Discs with coloring on the recording surface or discs that are dirty. · Recordable/ReWritable discs that have not been finalized. · 8 cm CD. Attempting to insert using an adapter may cause malfunction.
About USB devices · You cannot connect a USB device via a USB hub. · Connecting a cable whose total length is longer than 5 m may result in abnormal playback. · This unit cannot recognize a USB device whose rating is other than 5 V and exceeds 1.0 A.
About iPod/iPhone · Via USB input terminal:
Made for iPod touch (5th and 6th generation) iPod nano (7th generation) iPhone 4S, 5, 5S, 5C, 6, 6 Plus, 6S, 6S Plus, SE, 7, 7 Plus, 8, 8 Plus, X · It is not possible to browse video files on the “Videos” menu in [MODE OFF]. · The song order displayed on the selection menu of this unit may differ from that of the iPod/ iPhone. · You cannot operate iPod if “KENWOOD” or ” ” is displayed on iPod. · Depending on the version of the operating system of the iPod/iPhone, some functions may not operate on this unit.

14 ENGLISH

REFERENCES
About Android device · This unit supports Android OS 4.1 and above. · Some Android devices (with OS 4.1 and above) may not fully support Android Open Accessory
(AOA) 2.0. · If the Android device supports both mass storage class device and AOA 2.0, this unit always
playback via AOA 2.0 as priority.

Change the display information
Each time you press DISP, the display information changes. · If the information is unavailable or not recorded, “NO TEXT”, “NO INFO”, or other information
(eg. station name) appears or display will be blank.

/

:

iPod USB
ANDROID AUX

(For

)

When [MODE OFF] is selected (page 9):

Song title/Artist Album title/Artist Playing time Date back to the

beginning

Source name Date back to the beginning

:

Main display

Clock time Source name STANDBY RADIO
CD or USB

Main display
Display information: Main display Source name Date back to the beginning Frequency Date back to the beginning For FM Radio Data System stations only: Station name/Program type Radio text Radio text+ Radio text+ song title/Radio text+ artist Frequency Date back to the beginning For CD-DA: Disc title/Artist Track title/Artist Playing time Date back to the beginning For MP3/WMA/WAV/FLAC files: Song title/Artist Album title/Artist Folder name File name Playing time Date back to the beginning

Source name STANDBY RADIO
CD or USB
ANDROID AUX

Display information: Main display
Source name/Clock Clock back to the beginning
Source name/Clock Frequency Clock back to the beginning
For FM Radio Data System stations only: Source name/Clock Station name/Program type Radio text Radio text+ Radio text+ song title/Radio text+ artist Frequency Clock back to the beginning
For CD-DA: Source name/Clock Disc title/Artist Track title/Artist Playing time Clock back to the beginning
For MP3/WMA/WAV/FLAC files: Source name/Clock Song title/Artist Album title/Artist Folder name
File name Playing time Clock back to the beginning
Source name/Clock Clock back to the beginning
Source name/Clock Clock back to the beginning

ENGLISH 15

TROUBLESHOOTING

Symptom

Remedy

Sound cannot be heard.

· Adjust the volume to the optimum level. · Check the cords and connections.

“MISWIRING CHECK WIRING THEN PWR ON” appears.

Turn the power off, then check to be sure the terminals of the speaker wires are insulated properly. Turn the power on again.

“PROTECTING SEND SERVICE” Send the unit to the nearest service center. appears.

Source cannot be selected. Check the [SOURCE SELECT] setting. (Page 5)

General

· Sound cannot be heard. · The unit does not turn on. · Information shown on the
display is incorrect.

Clean the connectors. (Page 14)

The unit does not work at all. Reset the unit. (Page 3)

Correct characters are not displayed.

· This unit can only display uppercase letters, numbers, and a limited number of symbols.
· Depending on the display language you have selected (page 5), some characters may not be displayed correctly.

Radio

· Radio reception is poor. · Static noise while listening
to the radio.

Connect the antenna firmly.

Disc cannot be ejected.

Press and hold to forcibly eject the disc. Be careful not to drop the disc when it is ejected. If this does not solve the problem, reset the unit (page 3).

CD/USB/iPod

Noise is generated.

Skip to another track or change the disc.

“PLEASE EJECT” appears.

Reset the unit (page 3). If this does not solve the problem, consult your nearest service center.

Symptom
Playback order is not as intended.
Elapsed playing time is not correct.
“READING” keeps flashing.

CD/USB/iPod

The iPod/iPhone does not turn on or does not work.

“LOADING” appears when

you enter search mode by

pressing

.

“NO DISC”

“TOC ERROR”

“NA FILE”

“COPY PRO” “NO DEVICE”

“NO MUSIC” “iPod ERROR”

Remedy The playback order is determined by the order in which files were recorded (disc) or the file name (USB). This depends on the recording process earlier (disc/USB).
· Do not use too many hierarchical levels and folders. · Reload the disc or reattach the device (USB/iPod/
iPhone). · Check the connection between this unit and iPod/iPhone. · Disconnect and reset the iPod/iPhone using hard reset.
This unit is still preparing the iPod/iPhone music list. It may take some time to load, try again later.
Insert a playable disc into the loading slot. Make sure the disc is clean and inserted properly. Make sure the media (disc/USB) contain supported audio files. (Page 14) A copy-protected file is played (disc/USB). Connect a device (USB), and change the source to USB again. Connect a device (USB) that contains playable audio files. · Reconnect the iPod. · Reset the iPod.

16 ENGLISH

TROUBLESHOOTING

INSTALLATION/CONNECTION

ANDROID

Symptom · Sound cannot be heard during playback. · Sound output only from the Android device.
“NO DEVICE” or “READING” keeps flashing.
Playback is intermittent or sound skips. “NO MUSIC”/”ANDROID ERROR”

Remedy
· Reconnect the Android device. · Launch any media player application on the Android
device and start playback. · Relaunch the current media player application or use
another media player application. · Restart the Android device. · If this does not solve the problem, the connected
Android device is unable to route the audio signal to unit. (Page 15) · If USB connection does not work, connect the Android device through auxiliary input jack.
· Reconnect the Android device. · If USB connection does not work, connect the Android
device through auxiliary input jack.
Turn off the power saving mode on the Android device.
· Make sure Android device contains playable audio files. · Reconnect the Android device. · Restart the Android device.

Muting upon the reception of a phone call Connect the MUTE wire to your telephone using a commercial telephone accessory. (Page 19)
· When a call comes in, “CALL” appears. (The audio system pauses.) To continue listening to the audio system during a call, press BSRC. “CALL” disappears and the audio system resumes.
· When the call ends, “CALL” disappears. (The audio system resumes.)

Warning · The unit can only be used with a 12 V DC power supply, negative ground. · Disconnect the battery’s negative terminal before wiring and mounting. · Do not connect Battery wire (yellow) and Ignition wire (red) to the car chassis or Ground wire
(black) to prevent a short circuit. · To prevent short circuit:
Insulate unconnected wires with vinyl tape. Be sure to ground this unit to the car’s chassis again after installation. Secure the wires with cable clamps and wrap vinyl tape around the wires that comes into
contact with metal parts to protect the wires.
Caution · For safety’s sake, leave wiring and mounting to professionals. Consult the car audio dealer. · Install this unit in the console of your vehicle. Do not touch the metal parts of this unit during
and shortly after use of the unit. Metal parts such as the heat sink and enclosure become hot. · Do not connect the wires of speakers to the car chassis or Ground wire (black), or connect
them in parallel. · Mount the unit at an angle of less than 30°. · If your vehicle wiring harness does not have the ignition terminal, connect Ignition wire (red)
to the terminal on the vehicle’s fuse box which provides 12 V DC power supply and is turned on and off by the ignition key. · Keep all cables away from heat dissipate metal parts. · After the unit is installed, check whether the brake lamps, blinkers, wipers, etc. on the car are working properly. · If the fuse blows, first make sure the wires are not touching car’s chassis, then replace the old fuse with one that has the same rating.

ENGLISH 17

INSTALLATION/CONNECTION

Part list for installation

(A) Faceplate (×1)

(B) Trim plate (×1)

Installing the unit (in-dash mounting)

Do the required wiring. (Page 19)

(C) Mounting sleeve (×1) (D) Extraction key (×2)

Hook on the top side
Orientate the trim plate as illustrated before fitting.

Dashboard of your car

(E) Wiring harness (×1)

(F) Screws M5 × 7 mm (×4) M5 × 6 mm (×4) M4 × 8 mm (×1)

Basic procedure 1 Remove the key from the ignition switch, then
disconnect the terminal of the car battery. 2 Connect the wires properly.
See “Wiring connection” on page 19. 3 Install the unit to your car.
See “Installing the unit (in-dash mounting)”. 4 Connect the terminal of the car battery. 5 Press BSRC to turn on the power. 6 Detach the faceplate and reset the unit.
(Page 3)
18 ENGLISH

Installing the unit (without mounting sleeve) 1 Remove the mounting sleeve and trim plate from the
unit. 2 Align the holes in the unit (on both sides) with the
vehicle mounting bracket and secure the unit with screws (supplied).
Use only the specified screws. Using wrong screws might damage the unit.

Bend the appropriate tabs to hold the sleeve firmly in place.
Removing the unit 1 Detach the faceplate. 2 Fit the catch pin on the extraction keys into the holes
on both sides of the trim plate, then pull it out. 3 Insert the extraction keys deeply into the slots on
each side, then follow the arrows as shown on the illustration.

INSTALLATION/CONNECTION
Wiring connection Output terminals

Ignition switch
Car fuse box
Battery

Antenna terminal

To front speaker (left) To front speaker (right)
To rear speaker (left) To rear speaker (right)

White White/Black Gray Gray/Black Green Green/Black Purple Purple/Black

Car fuse box

Red (Ignition wire)

Yellow (Battery wire)
Black (Ground wire) To the metallic body or chassis of the car

Fuse (10 A)

IMPORTANT We recommend installing the unit with a commercially available custom wiring harness specific for your car and leave this job to professionals for your safety. Consult your car audio dealer.
When connecting to an external amplifier, connect its ground wire to the car’s chassis to avoid damaging the unit.

If no connections are made, do not let the wire come out from the tab.

Brown (Mute control wire)

To the terminal that is grounded when the telephone rings or during conversation (Page 17) (To connect the Kenwood navigation system, refer your navigation manual)

Blue/White (Power control wire/ Antenna control wire) (12 V 350 mA)
Light blue/yellow (Steering remote control wire)

To the power control terminal when using the optional power amplifier or to the antenna control terminal in the vehicle
To the steering wheel remote control adapter

ENGLISH 19

Tuner Tuner

SPECIFICATIONS

/

FM Frequency Range

Usable Sensitivity (S/N = 30 dB)

Quieting Sensitivity (DIN S/N = 46 dB)

Frequency Response (±3 dB)

Signal-to-Noise Ratio (MONO)

Stereo Separation (1 kHz)

AM Frequency Range

Channel Space Selection
Usable Sensitivity (S/N = 20 dB)

: 87.5 MHz — 108.0 MHz (50 kHz step) 8.2 dBf (0.71 V/75 )

17.2 dBf (2.0 V/75 )

30 Hz — 15 kHz

64 dB

40 dB

Band 1 (AM) 531 kHz — 1 602 kHz (9 kHz step)

Band 2 (SW1) 2 940 kHz — 7 735 kHz (5 kHz step)

Band 3 (SW2) 9 500 kHz — 10 135 kHz/ 11 580 kHz — 18 135 kHz (5 kHz step)

Band 1

9 kHz

Band 2/ 3

5 kHz

AM

29 dB (28.2 V)

SW

30 dB (32 V)

: FM Frequency Range
Usable Sensitivity (S/N = 30 dB) Quieting Sensitivity (DIN S/N = 46 dB) Frequency Response (±3 dB) Signal-to-Noise Ratio (MONO) Stereo Separation (1 kHz) AM Frequency Range
Channel Space Selection Usable Sensitivity (S/N = 20 dB)

87.5 MHz — 108.0 MHz (50 kHz step) 0.71 V/75
17.2 dBf (2.0 V/75 )
30 Hz — 15 kHz 64 dB 40 dB 531 kHz — 1 602 kHz (9 kHz step) 9 kHz 28.2 V

20 ENGLISH

Auxiliary

USB

CD player

SPECIFICATIONS
Laser Diode Digital Filter (D/A) Spindle Speed Wow & Flutter Frequency Response (±1 dB) Total Harmonic Distortion (1 kHz) Signal-to-Noise Ratio (1 kHz) Dynamic Range Channel Separation MP3 Decode WMA Decode
USB Standard File System Maximum Supply Current MP3 Decode WMA Decode WAV Decode FLAC Decode
Frequency Response (±3 dB) Input Maximum Voltage Input Impedance

GaAIAs 8 times over sampling 500 rpm — 200 rpm (CLV) Below measurable limit 20 Hz — 20 kHz 0.01 % 92 dB 88 dB 83 dB Compliant with MPEG-1/2 Audio Layer-3 Compliant with Windows Media Audio
USB 1.1, USB 2.0 (Full speed) FAT12/16/32 DC 5 V 1.0 A Compliant with MPEG-1/2 Audio Layer-3 Compliant with Windows Media Audio Linear-PCM FLAC file (Up to 48 kHz/16 bit)
20 Hz — 20 kHz 1 000 mV 30 k

Audio

Maximum Output Power Full Bandwidth Power (at less than 1 % THD) Speaker Impedance Tone Action
Preout Level/Load (CD) Preout Impedance

50 W × 4 22 W × 4

4 — 8

Bass

100 Hz ±8 dB

Middle

/

:

1.0 kHz ±8 dB

:

2.5 kHz ±8 dB

Treble 12.5 kHz ±8 dB

2 500 mV/10 k load

600

General

Operating Voltage
Installation Size (W × H × D)
Net Weight (includes Trimplate, Mounting Sleeve)

12 V DC car battery 182 mm × 53 mm × 158 mm 1.2 kg

Subject to change without notice.

ENGLISH 21

libFLAC Copyright (C) 2000-2009 Josh Coalson Copyright (C) 2011-2013 Xiph.Org Foundation
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: – Redistributions of source code must retain the above copyright notice, this list of conditions and the
following disclaimer. – Redistributions in binary form must reproduce the above copyright notice, this list of conditions and
the following disclaimer in the documentation and/or other materials provided with the distribution. – Neither the name of the Xiph.org Foundation nor the names of its contributors may be used to
endorse or promote products derived from this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

The marking of products using lasers The label is attached to the chassis/case and says that the component uses laser beams that have been classified as Class 1. It means that the unit is utilizing laser beams that are of a weaker class. There is no danger of hazardous radiation outside the unit.
/
. . .

· Microsoft and Windows Media are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.
· Use of the Made for Apple badge means that an accessory has been designed to connect specifically to the Apple product(s) identified in the badge and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with an Apple product may affect wireless performance.
· Apple, iPhone, iPod, iPod nano, iPod touch, and Lightning are trademarks of Apple Inc., registered in the U.S. and other countries.
· Android is a trademark of Google LLC.

i

(For

)

For Turkey Bu ürün 28300 sayili Resmi Gazete’de yayimlanan Atik Elektrikli ve Elektronik Eyalarin Kontrolü Yönetmelie uygun olarak üretilmitir.

Eski Elektrik ve Elektronik Ekipmanlarin mha Edilmesi Hakkinda Bilgi (atik yan ürün toplama sistemlerini kullanan ülkeleri için uygulanabilir)
Sembollü (üzerinde çarpi iareti olan çöp kutusu) ürünler ev atiklari olarak atilamaz. Eski elektrik ve elektronik ekipmanlar, bu ürünleri ve ürün atiklarini geri dönütürebilecek bir tesiste deerlendirilmelidir. Yaadiiniz bölgeye en yakin geri dönüüm tesisinin yerini örenmek için yerel makamlara müracaat edin. Uygun geri dönüüm ve atik imha yöntemi saliimiz ve çevremiz üzerindeki zararli etkileri önlerken kaynaklarin korunmasina da yardimci olacaktir.

(For

)

For Kazakhstan, Kyrgyz and Armenia

(For

)

Declaration of Conformity with regard to the RE Directive 2014/53/EU Declaration of Conformity with regard to the RoHS Directive 2011/65/EU
Manufacturer: JVC KENWOOD Corporation 3-12, Moriya-cho, Kanagawa-ku, Yokohama- shi, Kanagawa, 221-0022, JAPAN EU Representative: JVCKENWOOD Europe B.V. Amsterdamseweg 37, 1422 AC UITHOORN, THE NETHERLANDS
English Hereby, JVCKENWOOD declares that the radio equipment “KDC-154UM” is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: http://www.kenwood.com/cs/ce/eudoc/

(/) .
: : -30°C +85°C : 0% 90%

RE 2014/53/EU Direktifi uyarinca Uygunluk Beyani RoHS Yönergesi 2011/65/EU’ya göre Uygunluk Bildirimi
Üretici: JVC KENWOOD Corporation 3-12, Moriya-cho, Kanagawa-ku, Yokohama-shi, Kanagawa, 221-0022, JAPAN AB Temsilcisi: JVCKENWOOD Europe B.V. Amsterdamseweg 37, 1422 AC UITHOORN, THE NETHERLANDS
Turkish Burada, JVCKENWOOD “KDC-154UM” radyo ekipmaninin 2014/53/AB Direktifine uygun olduunu bildirir. AB uyumluluk deklarasyonunun tam metni aaidaki internet adresinde mevcuttur. http://www.kenwood.com/cs/ce/eudoc/

ii

4 × 50 4 × 22

8 — 4

8 ± 100

/

:

8 ± 1.0

:

8 ± 2.5

8 ± 12.5

10 / 2 500

600
12 158 × 53 × 182

1.2

%1 )
(
/ (CD )

( × × ) )
( .

GaAIAs 8 200 — 500
(CLV)
20 — 20 % 0.01
92
88 83 MPEG-1/2 Audio Layer-3 Windows Media Audio
( ) USB 2.0 USB 1.1 FAT12/16/32
1.0 5 MPEG-1/2 Audio Layer-3 Windows Media Audio
PCM ( 16/ 48 ) FLAC
20 — 20 1 000 30

(D/A)

( ±1)
( 1)
( 1)
MP3
WMA
USB MP3 WMA WAV FLAC
( ±3)

USB

CD

21

:

108.0 — 87.5 ( 50)

FM

75/ 0.71

( 30 = S/N)

( 75/ 2.0) 17.2 dBf

( 46 = DIN S/N)

15 — 30 ( ±3)

64 ()

40 ( 1)

1 602 — 531 ( 9)

AM

9

28.2

( 20 = S/N)

:

/

108.0 — 87.5 ( 50)
( 75/ 0.71) 8.2 dBf

FM

( 30 = S/N)

( 75/ 2.0) 17.2 dBf

( 46 = DIN S/N)

15 — 30 ( ±3)

64 ()

40 ( 1)

1 602 — 531 (AM) 1 ( 9)

AM

— 2 940 7 735
( 5)

2 (SW1)

— 9 500 / 10 135
— 11 580 18 135
( 5)

3 (SW2)

9

1

5 2/3

29 ( 28.2)
30 ( 32)

AM

SW

( 20 = S/N)

20

/

( 10)

.
.

.

()

/ / / /
( )

.

) (

(17 )
Kenwood ) (

/
/ ) (
( 350 12)

19

( ) ( )

/
) (

( )
(19 ) .

/
(1×) (B) (1×) (A)

.

(D) (1×) (C) (2×)

. 1
2 .
3 .

.
( ) . 1 ) 2 (
.()
. .

(F) (1×) (E)
(4×) 7 mm × M5
(4×) 6 mm × M5
(1×) 8 mm × M4
1
. . 2 .19 ” ”
. 3 .”( ) ”
. 4 . BSRC 5 (3 ) . 6

18

/
. 12 ·
. · () () ·
. () : ·
. .
.
. ·
. . ·
. .
() · .
.30° · · 12 ()
. . · ·
. ·
.

.Android · ·
. Android ·
. .Android ·
· Android
(15 ) . Android USB ·
.

· .
· . Android

ANDROID

.Android · Android USB ·
.

“NO DEVICE” . “READING”

.Android

.

. Android · “ANDROID ERROR”/”NO MUSIC” .Android · .Android ·

MUTE
(19 ) .
(. ) .”CALL” · .BSRC . “CALL” (. ) .”CALL” ·

17

.(USB) ()
.(USB/)
. · · .(iPhone/iPod/USB)
.iPhone/iPod · iPhone/iPod ·
.
.iPhone/iPod .
.
.
(USB/) (14 ) .
.(USB/)
(USB) . USB
(USB) .
.iPod · .iPod ·

.
.
. “READING”

iPod/USB/CD

iPhone/iPod .

“LOADING”

.

“NO DISC”

“TOC ERROR”

“NA FILE”

“COPY PRO” “NO DEVICE”

“NO MUSIC”

“iPod ERROR”

· .
. ·

.

. .

“MISWIRING CHECK .WIRING THEN PWR ON”

.

“PROTECTING SEND .SERVICE”

(5 ) .[SOURCE SELECT]

.

(14 ) .

. · . ·
· .

(3 ) .

.

· . .
(5 ) · .

.

. · · .

. .
.(3 )

.

iPod/USB/CD

.

.(3 ) .

.”PLEASE EJECT”

16

(

)

:(9 ) [MODE OFF]

/ /

:

iPod USB
ANDROID AUX

:

/

FM ( ) Radio Data System :
/ / + / + +

/

:CD-DA / /

:FLAC/WAV/WMA/MP3 / / /

/

15

STANDBY RADIO
USB CD
ANDROID AUX

Android . Android OS 4.1 · ( OS 4.1 ) Android ·
.Android Open Accessory (AOA) 2.0 AOA 2.0 Android ·
. AOA 2.0
. DISP “NO INFO” “NO TEXT” · . ( )

:

/

:

FM ( ) Radio Data System :
+ / + / +
:CD-DA / /

:FLAC/WAV/WMA/MP3 / /

STANDBY RADIO
USB CD

: ·
(wma.) WMA (mp3.) MP3 : : USB (flac.) FLAC (wav.) WAV (wma.) WMA (mp3.) MP3 CD-ROM/CD-RW/CD-R : · 1/2 ISO 9660 : · FAT32 FAT16 FAT12 : USB · .
. ·
. · . / ·
. .CD 8 ·
USB .USB USB · 5 ·
. . 1.0 5 USB ·
iPhone/iPod :USB ·
Made for (6th generation 5th) iPod touch
(7th generation) iPod nano X 8 Plus 8 7 Plus 7 SE 6S Plus 6S 6 Plus 6 5C 5S 5 iPhone 4S .[MODE OFF] “Videos” · ·
.iPhone/iPod .iPod ” ” “KENWOOD” iPod · iPhone/iPod ·
.

.

. .
) (
. · ·
. . · . · . . · . · . ·
:
.<www.kenwood.com/cs/ce/>
: CD ·
· .<www.kenwood.com/cs/ce/audiofile/>

14

[XX] :

(

/

)

[ZONE 2] [ZONE 1] [ALL ZONE]

.

) .([ALL ZONE] [ZONE 2] [ZONE 1]) 1

(.

. 2

[DISPLAY] [COLOR SELECT]

.[CUSTOM R/G/B] .[CUSTOM R/G/B] . 1 (//) [B]/[G]/[R]) S/T 2
. ([9] [0] ) 3
.
. . :[ON] . :[OFF] . :[DIMMER TIME] . [ON] 1 . [OFF] 2 [6:00] [6:00AM] :[OFF] [18:00] [6:00PM] :[ON] :

[DIMMER]

(. ) . 1 . :[LVL 31] [LVL 00] 2
:[AUTO] . :[ONCE] . :[OFF] .( 5 )

[BRIGHTNESS] [TEXT SCROLL]

: /[PURPLE1]/[RED3]/[RED2]/[RED1]/[CUSTOM R/G/B]/[VARIABLE SCAN]/[INITIAL COLOR] /[SKYBLUE2]/[SKYBLUE1]/[BLUE3]/[BLUE2]/[BLUE1]/[PURPLE4]/[PURPLE3]/[PURPLE2] /[YELLOWGREEN1]/[GREEN3]/[GREEN2]/[GREEN1]/[AQUA2]/[AQUA1]/[LIGHTBLUE] [ORANGERED]/[ORANGE2]/[ORANGE1]/[YELLOW]/[YELLOWGREEN2]

13

:

/

( ) COL · .
.[ALL ZONE] . [COLOR SELECT] COL ·
:

.[FUNCTION] 1

( ) 2

.

2 3

.

4

.

:[ON] [SOUND RECNSTR]

)

. :[OFF] .

(

/[LPF SUBWOOFER]/[SUBWOOFER SET]/[SUB-W LEVEL] · (4 ) .[SUB-W] [SWITCH PREOUT] [SUB-W PHASE] [SUB-W PHASE]/[LPF SUBWOOFER]/[SUB-W LEVEL] · .[ON] [SUBWOOFER SET]

:[17.5KHZ]/[15.0KHZ]/[12.5KHZ]/[10.0KHZ] [TRE CTR FRQ] .

[TRE ADJUST] [+1] :

. :[+8] [8]

:

/

[+3] : [TRE LEVEL]

/[JAZZ]/[EASY]/[POPS]/[ROCK]/[POWERFUL]/[TOP40]/[DRIVE EQ] :[USER]/[NATURAL] . .[EQ PRO] [USER] ·

:

[USER] :

/

[POWERFUL] : [PRESET EQ]

. :[OFF] . :[LV3]/[LV2]/[LV1] [BASS BOOST]

:[LV2]/[LV1] . :[OFF] .

[LOUDNESS]

. :[OFF] . :[ON] [SUBWOOFER SET]

/[120HZ]/[85HZ] . :[THROUGH] [LPF SUBWOOFER] / 120/ 85 :[160HZ] . 160

:(0°) [NORMAL]/(180°) [REVERSE] .
[THROUGH] · .[LPF SUBWOOFER] [SUB-W PHASE]

. :([0]) [F15] [R15] [FADER]

. :([0]) [R15] [L15] [BALANCE] [8] : ([0]) [+8] [8] :AUX :[0] . (. )

[VOLUME OFFSET]

12

[XX] : [AUDIO CONTROL]

. ([0]) [+15] [15] [SUB-W LEVEL]

.

(. )

:

/

[+1]/[+1]/[+2] [+3]/[+2]/[+8] : [+8] [8] [+8] [8] [+8] [8] [BASS LEVEL] [MID LEVEL] [TRE LEVEL]

. .[PRESET EQ] [USER] ·

[EQ PRO]

. :[200]/[100]/[80]/[60] . :[+8] [8] [BASS CTR FRQ] [BASS LEVEL] [BASS ADJUST]

. :[2.00]/[1.50]/[1.25]/[1.00] [BASS Q FACTOR]

. :[ON] . :[OFF] [BASS EXTEND] [OFF]/[1.00]/[+2]/[100] :

/

[ON]/[1.00]/[+8]/[100] :

:

:[2.5KHZ]/[1.5KHZ]/[1.0KHZ]/[0.5KHZ] .

[MID CTR FRQ] [MID ADJUST]

. :[+8] [8] [MID LEVEL]

. :[1.25]/[1.00]/[0.75] [MID Q FACTOR] [1.00]/[+1]/[1.0KHZ] :

/

[1.00]/[+2]/[2.5KHZ] :

:

(

)

. (

/[EASY]/[POPS]/[ROCK]/[POWERFUL]/[TOP40]/[DRIVE EQ] : [USER]/[NATURAL]/[JAZZ] .[EQ PRO] [USER] · [DRIVE EQ] ·
.

. [AUDIO CONTROL] AUD 1

( ) 2

.

. 2 3

.

4

( ) .[AUDIO CONTROL] AUD 1 .ENT IW J/K 2

.

11

AUX
: (5 ) .[SOURCE SELECT] [BUILT-IN AUX] [ON] ·

.( ) 1

3.5 ( ) “L”
.AUX BSRC 2 . 3

ANDROID/iPod/USB/CD

.[FUNCTION] 1

( ) 2

.

. 2 3

.

4

.

[XX] : [DRIVE 1]) :[DRIVE CHANGE] . ([DRIVE 5] . 3 1

(

)

iPod USB :[10%]/[5%]/[1%]/[0.5%]

.

[USB] [MUSIC DRIVE] [SKIP SEARCH]

AUX

…

.[FUNCTION] 1

. [SYSTEM] 2

[AUX NAME SET] 3

.

. 4

[TV]/[VIDEO]/[GAME]/[PORTABLE]/[DVD]/() [AUX]

.

5

.

10

/

.[MODE OFF] iPod

.

1

. / 2

. 3

(USB CD ) .
.
(iPod USB ) . S / T
(10 ) .%10 S / T ·
(iPod USB ) .
. 1 . 2

.9 0 Z A ” ” ·
. S / T 3 . ·
. 4

.5 / / ·

.

·

.

·

ANDROID/iPod/USB/CD

. 5 USB .
.(Mass Storage Class) · . ·
TuneIn Radio Pro/TuneIn Radio
iPhone/iPod TuneIn Radio Pro TuneIn Radio . USB
. ·

. 5 iPod USB . iPod iPod :[MODE ON] / .
. iPod :[MODE OFF] ( ) .DIRECT 1
./ 2 . ENT IW 3 .DIRECT · . · .ANDROID iPod USB ·

9

ANDROID/iPod/USB/CD

:

ANDROID/iPod USB/USB/CD

/

:

ANDROID/USB/CD

.

CD

.ENT IW

.6 IW

.S / T .S / T (+)

.S / T (+)

.S / T

.#FM+/ AM

.2 / 1

. 4

:

[ALL REPEAT]/[TRACK REPEAT]

FLAC/WAV/WMA/MP3 : [ALL REPEAT]/[FOLDER REPEAT]/[FILE REPEAT]

iPod : [REPEAT OFF]/[FOLDER REPEAT]/[FILE REPEAT]

. 3

: [RANDOM OFF]/[DISC RANDOM] FLAC iPod/WAV/WMA/MP3 : [RANDOM OFF]/[FOLDER RANDOM]

7*.[ALL RANDOM] 3

/
4/ / 5
64
64

USB USB
(500 mA :. ) CA-U1EX ( )
iPhone/iPod
KCA-iP103/KCA-iP102 1( )
2iPhone/iPod

:KCA-iP103 30 :KCA-iP102 1 . 2 Android Android 3
.Android
.ANDROID 4 .ANDROID/iPod .WMA/MP3 :CD 5 (9 ) .[MODE OFF] :iPod 6
.WMA/MP3 :CD 7*

3ANDROID
2USB ( )

8

[PTY SEARCH] [DRAMA] [EDUCATE] [SPORT] [INFO] () [AFFAIRS] [NEWS] :[SPEECH] [CHILDREN] [FINANCE] [WEATHER] [VARIED] [SCIENCE] [CULTURE] [DOCUMENT] [LEISURE] [TRAVEL] [PHONE IN] [RELIGION] [SOCIAL] [EASY M] () [ROCK M] () [POP M] () :[MUSIC] [COUNTRY] [JAZZ] [OTHER M] () [CLASSICS] [LIGHT M] ()
[FOLK M] () [OLDIES] [NATION M] ()
. [MUSIC] [SPEECH]

. :[ON] . :[OFF] :[ON] . :[OFF] .”AF”
:[ON] Radio Data System
. :[OFF] .
:[ON] . :[OFF] .(“TI” )
) 1 . (
/[FRENCH]/[ENGLISH]) PTY 2 . ([GERMAN] . S / T 3
:[ON] . :[OFF] .

[NEWS SET] 2[REGIONAL] 2[AF SET] [TI] [PTY SEARCH] [CLOCK] [TIME SYNC]

.[OFF] : :

/

2*

.[ON] : :

[PTY SEARCH]/[TI]/[AF SET]/[REGIONAL]/[NEWS SET]/[MONO SET] · . FM3/FM2/FM1
· .
.

7

.DIRECT · 2 10 ·
.

.[FUNCTION] 1

( ) 2

.

2 3

.

4

.

[XX] :
:[AUTO1] . S / T . :[AUTO2] . . :[MANUAL] . :[OFF] . :[ON] / ·
/ . .
. :[NO] . 6 :[YES] [NORMAL] · (5 ) .[PRESET TYPE] . FM :[ON] . :[OFF] [TUNER SETTING] [SEEK MODE] 1*[LOCAL SEEK] [AUTO MEMORY] [MONO SET]

. SW2/SW1/AM :

/

1*

. FM :

SW2/SW1/AM/FM3/FM2/FM1 :

:

/

AM/FM3/FM2/FM1 :

. FM “ST” · .FM FM ·

.RADIO BSRC 1