FLYDIGI Apex 3 Elite Gaming Controller User Manual
- June 5, 2024
- FLYDIGI
Table of Contents
FLYDIGI Apex 3 Elite Gaming Controller
Connection Controller
Press and hold the HOME button for 3 seconds to enter the Menu, you can set
the controller mode, configuration, brightness, etc. 
When using on a PC, please change the controller to Xinput mode
When using on a Android Mobile, please change the controller to Android
mode
STEP1: Scan the QR code and download the Android Flydigi Game Center APP
STEP2: Enter the APPl – peripheral management, click the connection
Controller，According to the guide for the controller connection at Android
game Center.
When using on Switch, please change the controller to Switch mode Open the
Switch, enter the [Handle] option, and long press the HOME button to
successfully pair. The button mapping relationship in Switch mode can be found
in the below. If it is paired and connected, when the Switch is in standby
state, press the HOME button can wake up the Switch. 
Force Feedback Triggers Quick Experience
Flydigi presets 3 force feedback modes, long press the Home button to enter
the Menu, enter the [Configuration] page, and you can quickly change it.
Configuration 1 General Mode
Force feedback trigger not turned on (factory default).
Configuration 2 Racing Mode
Simulate the throttle feel.
Configure 3 Sniper Mode
Simulate the hand feel of the gun’s paragraph trigger.
Configure 4 machine gun modes
Simulation of high-frequency recoil for auto-firing
Advanced gameplay Open more customization
Visit Flydigi’s official website www.flydigi.com
download [Flydigi Space Station], you can customize trigger settings, button
mapping, lighting effects, etc.
Flydigi PC Space Station
Force feedback triggers adjustment
Adjustable force feedback mode, setting strength, stroke, vibration, etc
Lighting adjustment
Adjustable lighting mode, set light color, brightness, etc
Button customization
Adjustable key mapping, setting macro commands and connecting points
Display picture settings
Adjustable display animation, set custom pictures 
Other accessories
USB-C cable/USB wireless dongle/Personalized light card/Replacement
joysticks/Carring Case/Light card pin/Sticker. Replaceable light plate – comes
with an accessory kit, which can be replaced by yourself. For usage, refer to
the instructions for the light plate accessory kit Due to different versions,
there may be differences in connotation accessories (Flydigi controller
charging base needs to be purchased additionally)
Parts Description
Removable upper cover Please remove the D-pad before disassembling, and then
lift the gap of the eye handle grip to remove it 
Replaceable Joystick
Pull it out vertically, you can remove or install the Joystick, and the
Joystick of different heights is suitable for different games 
The name and content of harmful substances in the product
Q&A
Q: The controller cannot connect to the Dongle and Bluetooth device.
A: Select Pairing in the on-screen menu, it shows Pairing, then turn on
the phone’s Bluetooth again, or plug the wireless dongle into the device’s USB
port, keeping the controller close to the receiver.
Q: The controller connects the device through the wireless dongle, but the
button fails.
A: Avoid the receiver being too far away, there is a blockage between the
dongle and the controller, and other electronic devices nearby will generate
electromagnetic interference.
Q: The joystick can not return to the center, the trigger is triggered by
mistake, and the body sensation is not controlled.
A: Press and hold the SELECT + START + right joystick for three seconds,
enter the calibration mode, first leave the controller on the desktop for 5
seconds, then push the left and right joystick to the end and rotate two
times, then press the trigger twice, and finally press the SELECT + START +
right joystick at the same time to complete the calibration.
Q: Upgrade the controller firmware.
A: Install the Flydigi game center on the mobile, or install the Flydigi
PC space station on the computer, and upgrade the firmware according to the
instructions in the software.
Specifications
RF: Bluetooth 5.0, Bluetooth 5.0 BLE
Operating distance: less than 10 meters Battery information: rechargeable
lithium-ion battery, battery capacity 1500mAh, charging time 3~ 4 hours,
charging voltage 5V, charging current 1000mA Working current: the current is
less than 80mA in use, and the current is less than 0.4mA in standby.
Product weight: 310g
Temperature range: -5 ℃~ 50 ℃ when in use
Humidity range: 20%~ 80% when used
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a class
digital device,pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation.
This equipment generates uses and can radiate radio frequence energy and,if
not installed and used in accordance with the instructions,may cause harmful
interference to radio communications.However,there is no guarantee that
interference will not occur in a particular installation.if this equipmemt
does cause harmful interference to radio or television reception,which can be
determined by turning the equipment off and on,the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an autlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help