LEXON LH77 Horizon Hanging Lamp User Manual
- June 4, 2024
- LEXON
Table of Contents
LEXON LH77 Horizon Hanging Lamp
Thank you for choosing our Horizon Hanging lamp. Before using the appliance, and to ensure the best use, carefully read these instructions. Keep this manual for future reference.
WARNING
- When using outdoors, prevent the lamp from standing in
- Tighten the protective cap securely while the USB port is not
- Do not expose the lamp to direct sunlight for a long
- Clean carefully with a soft cloth and lukewarm
- Do not use any cleaning materials that contain
PRODUCT OVERVIEW
- Touch control
- Lamp
- Hook
- Protective cap
- LED charging indicator
- USB Type-C port
FEATURES
- LED technology with 9 adjustable colors (warm white, cold white, blue, yellow, green, red, purple, light pink & light blue)
- Rechargeable LED lantern with memory system
- Touch control
- Up to 12 hours of lighting
- Suitable for indoor and outdoor
CHARGING INSTRUCTIONS
We recommend you fully charge the battery before using Horizon Hanging Lamp for the first time.
- Plug the provided USB Type-C cable into the charging port of Horizon Hanging
- Plug the USB end of the cable into any DC 5V-1A power supply
- The LED next to the charging port will start flashing until the complete charge then it will remain in a solid state.
An initial full charge should take about 3,5 hours. A full charge provides around 12 hours of lighting.
OPERATING INSTRUCTIONS
- Long press the touch control to turn ON the
- There are 9 colors options you can select by short pressing the touch
- To adjust brightness, maintain the touch control pressed on the selected color until you have reached the desired intensity.
- To turn OFF the light, wait 3 seconds after the color selection then press
Note: If you want to set Horizon Hanging Lamp in cool and warm light mode only, press the touch control 3 times quickly.
To return to full set lighting mode, repeat the procedure. Horizon Hanging Lamp has a backup memory allowing it to remember the last color & brightness selected in ON mode.
SAFETY PRECAUTIONS
- Check the voltage of your power supply. The voltage must be between 100 and
- Make sure to respect the technical specifications for charging and never use a power adapter delivering more voltage output than the one indicated to avoid any irreversible damage to the internal circuit (DC Input: 5V-1A).
- Place the lamp on a dry and horizontal
- When using outdoors, prevent the lamp from standing in
- Tighten the cap securely while the USB port is not
- Avoid contact with other liquids: keep away from corrosive
- Do not expose the lamp to direct sunlight for a long
- Do not expose the lamp to excessive heat from heat
- Clean carefully with a soft cloth and lukewarm
- Do not use any cleaning materials that contain
- Never open the lamp and never attempt to repair the lamp
- If the supplied cable is damaged, do not attempt to repair it
TECHNICAL SPECIFICATIONS
- Material: ABS/PC/Aluminum
- Weight: 205 gr / 0.45 lb
- Dimensions: 9.4 x 7.0 x 22.9 cm / 3.7 x 2.76 x 9.01
- Accessories: USB Type-C cable (included)
- Water resistance: IPX4 (Protected against splashing, rain, or sprayed water from any angle)
- Requires the cap to be securely fastened
- LED source: Non-replaceable LEDs
- LED quantity: 9 pcs
- Max. output lumen: 59 lm
- Color temperature: Warm white 2900K-3500K / Cold white 6000K-6500K
- Max. output power: 2W
- Input port: DC 5V-1A Battery type: Li-polymer
- Battery capacity: 2000 mAh Battery voltage: 3.7V
- Normal usage time: Up to 12h (Tested at 75% brightness, 22°C ambient indoor temperature)
- Battery life may vary depending on the light intensity and LED color chosen
- Charging system: USB Type-C Charging time (USB Type-C): 3,5 hours
- Operating temperature: 0° – +55°C
- International warranty: 1 year
- UK CONFORMITY ASSESSMENT
The object described above is in conformity with the relevant Union
harmonization legislation. The original UK declaration of conformity may be
found at:
https://www.lexon-design.com/assets/certifications-ukca-
horizonhanginglamp.pdf
DISPOSAL AND RECYCLING INFORMATION
After the implementation of the European Directive 2012/19/EU in the national legal system, the following applies: electrical and electronic devices may not be disposed of with domestic waste. Consumers are obliged by law to return the electrical and electronic devices at the end of their service lives to the public collecting points set up for this purpose or point of sale. Details of this are defined by the national law of the respective country. This symbol on the product, the instruction manual, or the package indicates that a product is subject to these regulations. By recycling, reusing the materials, or other forms of utilizing old devices, you are making an important contribution to protecting our environment.
USA – FCC STATEMENT
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Notice:
Any changes or modifications not expressly approved by the party responsible
for compliance could void your authority to operate the equipment.
NOTE
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/ TV technician for help.
RF exposure statements
This equipment complies with the FCC radiation exposure requirement set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance.
Canadian Compliance Statement
This device complies with Industry Canada license-exempt RSS. Operation is subject to the following two conditions:
- This device may not cause interference, and
- This device must accept any interference, including interference that may cause undesired operation of the device.
This Class B digital apparatus complies with Canadian ICES-003.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>