SABLUTE SG-8933 Tri-Mode Backlit Mechanical Keyboard User Manual
- June 12, 2024
- SABLUTE
Table of Contents
SABLUTE SG-8933 Tri-Mode Backlit Mechanical Keyboard
Product Information
This device complies with part 15 of the FCC Rules, which means it meets the regulations set by the Federal Communications Commission (FCC) for electromagnetic interference. It is designed to operate without causing harmful interference and is capable of accepting any interference it may receive, including interference that may cause undesired operation.
It is important to note that any changes or modifications made to the device that are not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
The device has been evaluated and meets the general RF (radio frequency) exposure requirement. This means it can be used in portable exposure conditions without any restrictions.
Product Usage Instructions
If you experience any interference or undesired operation while using the device, you can try the following steps:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- If the interference persists, it is recommended to consult the dealer or an experienced radio/TV technician for assistance.
By following these instructions, you can optimize the performance of the device and minimize any potential interference issues that may arise.
Product List
- Mechanical Keyboard ×1
- Type-C Charging Cable x1
- USB Receiver ×1
- User Manualx1
Product Specification
| Dimensions | (L)311mm x (W)120mm x (H)25mm±0.3mm |
|---|---|
| Weight | 555g±20g |
| Connection | USB wired mode, 2.4G wireless mode, Bluetooth |
| Battery Capacity | 1200mAh |
| Voltage | 3.7V |
| Working Current (without backlight) | 2mA |
| Working Time (without backlight) | 600 Hours |
| Working Current (with the brightest backlight on) | 120mA |
| Working Time (with the brightest backlight on) | 10 Hours |
| Charging Time | 4 Hours |
| Standby Current | SOµA |
| Standby Time | 365 Days |
Compatible Systems: Windows XP. Windows 7/8/10/11, Mac OS, iPad OS, IOS, Android
Instructions for use
Status indicator description:
Combination Keys Functions
Switch to the MAC System
Such to the Windows systent
Switch to the los System
Switch to the Android System
Lock the Win key
Keyboard light switch
Backlight effect switch
Switch to the constant light pattern
Check battery percentage Wireless Mode)
Keyboard Back on smoothness
Keyboard Backlight Brightness-
Backlight Speed-
Backlight Speed+
Mode description
Bluetooth Connection
Turn on the keyboard, please press and hold combination keys for 3 seconds.
When the pairing indicator light blinks rapidly, the keyboard enters pairing
mode. Once successfully connected, the white light will illuminate.
Connection
Turn on the keyboard, please press and hold the combination keys for 3
seconds. When the pairing indicator light blinks rapidly, the keyboard enters
pairing mode.
Once successfully connected, the white light will illuminate.
Wired Connection
Please connect your computer and keyboard with the Type-C cable then press
to switch Wired Mode.
The methods to switch modes
Press briefly to switch to Bluetooth 1.
Press briefly to switch to Bluetooth 2.
Press briefly to switch to Bluetooth 3.
Press briefly to switch to 2.4G Wireless mode.
Smart power saving function
-
a. If the keyboard is not used for 2 minutes in wireless mode, the keyboard enters the first stage of power saving mode and the backlight is turned off.
Press any key to wake up. -
b. If the keyboard is not used for 15 minutes, the keyboard enters the second stage sleep mode, and all lights are turned off. Press any key to wake up.
-
C. Wired mode: The keyboard will not turn off the light
Multimedia Instructions
Screen Brightness+
Screen Brightness-
Multi-screen display (Win+ Tab)
Previous Track
Pause/Play
Next Track
Mute
Volume-
Volume+
Search
App Switching
Language Switching
FAQ
-
Q1: What should I do if the keyboard gets delayed or stuck?
A1: -
Please check there is no 2.4GHz device (e.g. router) nearby to interfere with the connection.
-
Please check the keyboard has been fully charged.
-
Please check there is no full metal case that may block the signal.
Q2: What should I do if the keyboard can not be charged?
A2: -
Please check whether the charging port is connected.
-
Please try to replace the charging cable.
-
Try to change the USB port, and if the problem can not be solved please feel free to contact us.
Q3: What should I do if the backlight stops working?
A3: -
Please charge for half an hour and then re-insert the USB.
-
Please try to restart the keyboard.
Q4: Where is my USB receiver?
A4: -
The USB receiver is placed on top of the keyboard inside the package, please look for it carefully.
-
Please contact us to get the free replacement if you have lost the USB receiver.
Note
-
The multimedia keys are for Win 8 and Win 10,for other systems,there may be no function for some combined kevs.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver. -
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-
Consult the dealer or an experienced radio/TV technician for help Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:- This device may not cause harmful interference
- This device must accept any interference received, including interference that may cause undesired operation.
Cautions
- Please fully charge the keyboard when you first receive the product as this helps to maintain the battery life.
- Please remove the power supply when charging is complete.
- If the keyboard is not used for a long time, it is recommended to turn off the power switch of the keyboard.
- Please do not expose this product to water because it may cause short-circuit and damage the product.
- Please do not drop or hit this product because shocks may damage the components inside.
- Please do not place this product near extreme heat or sources of fire.
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation. Any Changes or modifications not expressly approved by
the party responsible for compliance could void the user’s authority to
operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.